Instruments
Outside temperature
Trip reset
1
In some situations, it may happen that the
outside temperature is displayed after a delay
or not at all, including:
-
-
-
when stationary or moving at a slow speed
(less than about 16 mph (25 km/h),
in the case of a change that is too high
(entering or leaving a garage, tunnel, etc.),
during very short journeys (less than about
2 minutes).
Starting from the Menu page of the touch
screen:
F Select the Vehicle information tab.
The "Journey information" tab displays the
following information:
Lighting dimmer control
F When the desired trip is displayed, press
one of the two DISP buttons for more than
two seconds.
Trips A and B are independent but their use is
identical.
When driving at night, this function allows
certain instrument panel displays to be
switched off so as to reduce visual fatigue for
the driver.
It operates only while the sidelamps are on.
F As soon as the "Lighting dimmer" menu is
displayed, keep one of the DISP buttons
pressed to access the settings.
F Then press one of the two DISP buttons
successively to increase or decrease the
brightness. The display flashes to show you
the brightness chosen.
-
-
-
-
"Average speed",
"Elapsed time",
"Range",
the current fuel consumption presented in
graphical form,
For example, trip A can be used for daily
figures and trip B for monthly figures.
With the touch screen
-
the "History" tab which allows display
of fuel consumption figures for the latest
journeys made.
If your vehicle is equipped with the touch
screen, your can refer to information about the
journey in progress.
The "Delete" button allows the consumption
figures to be reset to zero on the the touch
screen tablet and in the instrument panel.
The "Update" button is used to display the best
result from the "History" tab.
19
English 