Safety
U:
Seat suitable for the installation of
a child seat secured using a seat belt
and universally approved, rearward
and/or forward facing, with the front
seat adjusted in the middle longitudinal
position.
There are three anchorages for each seat:
This ISOFIX mounting system ensures fast,
reliable and safe fitting of the child seat in your
vehicle.
ISOFIX child seats are fitted with two locks
that are anchored on both anchors A.
Some seats also feature a top tether that will
be attached to the anchor B.
U (R): same as U, with the vehicle seat which
must be adjusted in the rearmost
longitudinal position, backrest
straightened.
To secure the child seat using the TOP
TETHER:
-
remove and store the head restraint before
installing the child seat on this seat (refit it
once the child seat has been removed),
run the strap of the child seat behind the top
of the seat backrest, centring it between the
holes for the head restraint rods,
secure the clip of the top tether to the
anchorage B,
-
two anchorages A, located between the
backrest and cushion of the vehicle seat,
indicated by a marking,
-
ISOFIX mountings
The seats shown below are fitted with
-
-
regulation ISOFIX mounting:
tighten the upper strap.
The incorrect installation of a child seat in
a vehicle compromises the protection of
the child in the event of an accident.
-
an anchorage B behind the seat for fixing
the upper strap, referred to as the TOP
TETHER. It is indicated by a marking.
Strictly follow the fitting instructions
provided in the installation guide supplied
with the child seat.
The TOP TETHER secures the upper strap of
child seats that have them. In case of frontal
impact, this device limits the tilting of the child
seat forward.
For more information on the options for
installing ISOFIX child seats in your vehicle,
refer to the summary table.
66
English 
