Practical information
Battery
Procedure for charging your battery when it is flat or for starting the engine using another battery.
Disconnecting the (+) cable
Access to the battery
The presence of this label indicates
the use of a 12 V lead-acid battery with
special technology and specification, for
which the involvement of a PEUGEOT
The battery is located under the bonnet.
To gain access to it:
dealer or qualified workshop is required
when replacing or disconnecting the
battery.
Failure to observe this recommendation
may cause premature wear of the
battery.
Raise the locking tab D fully to release the
cable terminal clamp E
open the bonnet using the interior release
lever, then the exterior safety catch,
secure the bonnet stay,
Reconnecting the (+) cable
Position the open clamp E of the cable on
the positive post (+) of the battery.
Press vertically on the clamp E to position
it correctly on the battery.
remove the plastic cover on
the (+) terminal.
Lock the clamp by spreading the
positioning lug and then lowering the tab D
After refitting the battery, the Stop &
Start system will only be active after
several hours depending on the climatic
conditions and the state of charge of
the battery (up to about 8 hours).
Do not apply excessive force on the
tab as locking will not be possible if the
clamp is not positioned correctly; start
the procedure again.
178
English 
