118 - SPECIAL FEATURES
Setting the alarm (external and
internal protection)
Disarming the alarm
(external and internal protection)
ALARM
Switch the ignition off and get out
of the vehicle.
Press the unlocking button of the
remote control key.
The doors unlock.
The direction indicators lash for
two seconds.
The red light on the switch goes out.
Setting and deactivating the
alarm system
Switching off the siren.
The alarm completes the security
equipment for your vehicle. It offers
two types of protection.
Deadlock the vehicle.
The doors lock.
The direction indicators light for
two seconds.
-
external protection: when it is
set, the alarm sounds if one of
the doors, the boot or the bon-
net is opened;
internal protection: when it is set,
the alarm sounds if the sensors
detect air movement in the pas-
senger compartment (a broken
window), or movement within
the car.
The red light on the switch lashes
once a second.
5 seconds later, internal protection is
set.
45 seconds later, external protection
is set.
Note: if the warning light continues to
lash after de-activation of the alarm,
it is a sign that the alarm has been
triggered. The lashing will stop when
the ignition is switched on.
-
Note: when the alarm is triggered,
the siren sounds for thirty seconds.
After the thirty seconds it stops, but
the alarm remains set.
The alarm also has an anti-tamper
function.
If there is an attempt to tamper with
the wires to the siren, control unit or
the battery, the siren sounds and the
direction indicators light.
When the alarm is trig-
gered, if a door, the tail-
gate or bonnet is not
closed correctly, the siren
sounds for a moment. If
the vehicle is closed correctly in the
following 45 seconds, the alarm is
activated and the direction indica-
tors remain on for two seconds. In
all cases, the alarm is activated af-
ter 45 seconds.
English 