Get VISIBILITY Guide for Peugeot 206 4 Door 1998-2013

VISIBILITY 63

-

Dipped/Main beam change

Pull the stalk towards you.

Vehicles itted with front fog

lamps and a rear fog lamp (ring C)

Lights on reminder

Front fog lamps (irst rotation

of the ring forwards)

With the ignition off and the auto-

matic lighting function switched off,

when the driver’s door is opened, a

buzzer sounds if you have left your

lights on.

The front fog lamps operate with the

side lights and the dipped headlamps.

Front fog lamps and rear

fog lamp

Front and rear fog

lamps (2nd rotation of

the ring forwards).

Rotate the ring forwards to switch on

and backwards to switch off. The sta-

tus is conirmed by the indicator light

on the instrument panel.

LIGHTS STALK

Note: to switch off the rear fog lamp

and the front fog lamps, turn the ring

backwards twice in succession.

Front and rear lights

Selection is by turning ring A.

Vehicles itted with a rear fog

lamp (ring B)

Note: when the lights are switched

off automatically or when the dipped

headlamps are switched off manu-

ally, the front fog lamps, the rear fog

lamp and the side lights remain on

(turn the ring backwards to switch off

the front fog lamps. The side lights

then switch off).

Rear fog lamp

Lights off

This only operates with the dipped/

main beam headlamps.

Side lights

Note: when the lights are switched

off automatically, the rear fog lamp

and the dipped headlamps remain on

(turn the ring backwards to switch off

the rear fog lamp. The dipped head-

lamps and side lights then switch

off).

Dipped/Main beam

headlamps

Automatic switching

on of lights

64 - VISIBILITY

"Follow me home" lighting

AUTOMATIC SWITCHING ON

OF LIGHTS

Operating check

Activation

The activated function is accompa-

nied by an audible signal and a mes-

sage on the multifunction display.

When you leave your vehicle, the

side lights and dipped headlamps

can be left on for approximately

30 seconds.

The side lights and dipped beam

headlamps switch on automatical-

ly if the light is poor and when the

windscreen wipers operate continu-

ously and switch off when the light

becomes bright enough or the wind-

screen wipers are switched off.

In foggy weather or in snow, the

brightness sensor can detect suf-

icient light, the lights will not

come on automatically. If neces-

sary, the dipped headlamps must

be switched on manually.

To do this:

-

place the key in the STOP

position,

-

place the lights stalk in the

0 position,

Disarming

The disarmed function is accompa-

nied by an audible signal.

When the driver uses the manual

lighting controls, the function is tem-

porarily disarmed.

-

lash the headlamps,

get out of the vehicle and lock it.

This function is active when the ve-

hicle is supplied to the customer.

To disarm or activate the function:

If the brightness sensor does not

function correctly, the lights come

on accompanied by an audible signal

and a message on the multifunction

display.

-

Place the key in the accessories

position (1st notch),

Place the lights stalk in the

AUTO/0 position,

Press the end of the lights stalk

for more than four seconds.

In good or rainy weather,

both day and night, the

front fog lamps and the

rear fog lamp are dazzling

and are prohibited.

Consult a PEUGEOT dealer.

Do not forget to switch them off

when they are no longer needed.

Do not cover the brightness sen-

sor, coupled with the rain sensor,

located in the centre of the wind-

screen, behind the interior mirror.

It is used for automatic switching

on of the lights.

Direction indicators

(lashers)

Left: downwards.

Right: upwards.

64 - VISIBILITY

"Follow me home" lighting

AUTOMATIC SWITCHING ON

OF LIGHTS

Operating check

Activation

The activated function is accompa-

nied by an audible signal and a mes-

sage on the multifunction display.

When you leave your vehicle, the

side lights and dipped headlamps

can be left on for approximately

30 seconds.

The side lights and dipped beam

headlamps switch on automatical-

ly if the light is poor and when the

windscreen wipers operate continu-

ously and switch off when the light

becomes bright enough or the wind-

screen wipers are switched off.

In foggy weather or in snow, the

brightness sensor can detect suf-

icient light, the lights will not

come on automatically. If neces-

sary, the dipped headlamps must

be switched on manually.

To do this:

-

place the key in the STOP

position,

-

place the lights stalk in the

0 position,

Disarming

The disarmed function is accompa-

nied by an audible signal.

When the driver uses the manual

lighting controls, the function is tem-

porarily disarmed.

-

lash the headlamps,

get out of the vehicle and lock it.

This function is active when the ve-

hicle is supplied to the customer.

To disarm or activate the function:

If the brightness sensor does not

function correctly, the lights come

on accompanied by an audible signal

and a message on the multifunction

display.

-

Place the key in the accessories

position (1st notch),

Place the lights stalk in the

AUTO/0 position,

Press the end of the lights stalk

for more than four seconds.

In good or rainy weather,

both day and night, the

front fog lamps and the

rear fog lamp are dazzling

and are prohibited.

Consult a PEUGEOT dealer.

Do not forget to switch them off

when they are no longer needed.

Do not cover the brightness sen-

sor, coupled with the rain sensor,

located in the centre of the wind-

screen, behind the interior mirror.

It is used for automatic switching

on of the lights.

Direction indicators

(lashers)

Left: downwards.

Right: upwards.

VISIBILITY 65

-

The command must be reacti-

vated whenever the ignition has been

switched off for more than one minute:

-

move the stalk to any position,

-

then move it back to the required

position.

Windscreen wash

Pull the wiper stalk towards you. The

windscreen wash, then the wind-

screen wipers, operate for a speciied

time.

WINDSCREEN WIPER STALK

Front windscreen wiper with

automatic wipe

Front windscreen wiper with

intermittent wipe

The headlamp wash is also activated

if the headlamps are on.

2

Fast wipe (heavy rain).

Normal wipe (moderate rain).

2

1

I

Fast wipe (heavy rain).

Normal wipe (moderate rain).

Intermittent wipe.

Off.

1

AUTO Automatic wipe.

0

â

Off.

Single wipe (press down-

wards).

0

â Single wipe (press downwards).

In the Intermittent position, the wiping

speed is in proportion to the vehicle

speed.

In the AUTO position, the wiping

speed is in proportion to the intensity

of the rainfall.

66 - VISIBILITY

Automatic windscreen wipers

Rear screen wiper

Do not cover the rain sen-

sor located on the wind-

screen behind the interior

mirror.

In the AUTO position, the windscreen

wipers operate automatically and

adapt their speed to the intensity

of the rainfall.

Turn ring A to the irst notch

for intermittent wiping.

If the ignition is switched

off, it is necessary to re-

activate the control each

time. To do this, move the stalk to

any position, then move it back to the

required position.

When using an automatic car

wash, switch off the ignition or

check that the wiper stalk is not in

the AUTO position.

In winter, it is advisable to wait

for the windscreen to completely

clear of ice before operating the

automatic wipe.

Operating check

Activation

Activation of the function is accom-

panied by a message on the multi-

function display.

Automatic rear screen wiper

When the windscreen wipers control

is activated and you engage reverse

gear, the rear screen wiper operates

intermittently.

Note: if you use a bicycle carrier,

consult a PEUGEOT dealer to have

this function deactivated or install a

speciic bicycle carrier approved by

PEUGEOT.

In the event of malfunction, the

driver is informed by an audible sig-

nal.

In the AUTO position, the wind-

screen wiper will operate in intermit-

tent mode.

Contact a PEUGEOT dealer to have

the system checked.

Rear screen wash

Turn ring A past the irst

notch; the screen wash then

the wiper operate for a ixed

period.

VISIBILITY 67

-

Current consumption

TRIP COMPUTER

Zero reset

This is the average quantity of fuel con-

sumed during the last few seconds.

This function is displayed only when

the vehicle is travelling at a speed

greater than 20 mph (30 km/h).

Press the stalk for more than two

seconds.

Pressing the button on the end of the

wash/wipe stalk enables the following

data to be displayed:

Range

Distance travelled

This shows the distance that can still

be covered with the fuel remaining in

the tank.

This indicates the distance travelled

since the computer was last set to

zero.

Note: this igure may increase if there

is a change in the style of driving or

the road surface, producing a signii-

cant drop in current consumption.

When the range is less than 20 miles

(30 km), three segments are dis-

played. After illing with fuel, the

range is displayed when it exceeds

60 miles (100 km).

Display B

Average speed

This is the average speed calculated

since the computer was last set to

zero (with the ignition on).

If horizontal segments are displayed

for long periods instead of digits,

contact a PEUGEOT dealer.

-

the range

the distance travelled

the average consumption

the current consumption

the average speed

Average consumption

This is the average fuel consumption

since the computer was last set to

zero.

68 - VISIBILITY

2. Passenger's electric window

switch.

Always remove the key

from the ignition when

leaving the vehicle, even

for a short time.

3. Rear left electric window

switch.

If an obstacle is detected when

operating the electric windows,

you must reverse the movement

of the window. To do this, press

the control concerned.

4. Rear right electric window

switch.

When the driver operates the pas-

senger electric window controls,

he must ensure that no one is pre-

venting correct closing of the win-

dows.

Temporary disarming of the

rear windows (child safety)

The driver must ensure that pas-

sengers use the electric windows

correctly.

Be aware of children when operat-

ing the windows.

ELECTRIC WINDOWS

1. Driver's electric window

switch

-

Manual operation:

Press or pull switch 1 gently. The

window stops as soon as the

switch is released.

-

Automatic operation:

Press or pull switch 1 irmly.

One touch completely opens or

closes the window.

REAR QUARTER LIGHTS

(3 DOOR)

Automatic closing only operates

when the engine is running and only

on the driver's electric window.

This switch enables the rear windows

to be locked whatever their position.

A 1st press activates the control (the

indicator light on the button comes

on) and a 2nd press deactivates it

(the indicator light on the button goes

out).

To partially open the rear windows,

tilt lever then push the window.

VISIBILITY 69

-

Manual exterior mirrors

Move the lever in all four directions

to adjust.

When the vehicle is parked, the ex-

terior mirrors can be folded back

manually.

Manual interior mirror

Electric exterior mirrors

The interior mirror has two positions:

-

Turn knob 1 to the right or to the left

to select the corresponding mirror.

Move knob 1 in all four directions to

adjust.

day (normal),

night (anti-dazzle).

-

To change from one to the other,

push or pull the lever on the lower

edge of the mirror.

Fold-back electric mirrors

With the ignition on, turn knob 1 to

position A.

Objects observed in the

driver’s and passenger’s

mirrors are in reality closer

than they appear.

This must be taken into account to

judge correctly the distance of ve-

hicles approaching from behind.

VISIBILITY for Your Peugeot 206 4 Door 1998-2013

Related Topics

Popular Owner Manuals

Latest Owner Manuals