COMFORT
6. Armrests (except 3 door)
7. Heated seats switch
With the engine running, the front seats
can be heated separately.
) Use the adjustment dial, placed on
the side of each front seat, to switch
on and select the level of heating re-
quired:
REAR SEATS
Bench seat the left-hand part (2/3) or
right-hand part (1/3) of which can be
folded to adapt the load space in the
boot.
Rear head restraints
0: Off.
1: Low.
2: Medium.
3: High.
These have a high position (comfort)
and a low position (rear visibility).
These can be folded down and are re-
movable.
) To remove an armrest, press the but-
ton located between the armrest and
the side of the seat and pull it off.
They can also be removed; to remove them:
) pull the head restraint upwards to
the stop,
) then, press the lug.
Never drive with the head re-
!
straints removed; they must be in
place and correctly adjusted.
The command for activation of
heating of the seat(s) remains
memorised for two minutes after
the ignition has been switched off.
i
As the head restraints are not in-
terchangeable, take care to put
them back in their original position
when refitting.
54
English