In the event of a breakdown -> Towing for Your Peugeot 208 4 Door First Generation (2012-2019)

In the event of a breakdown  
F switch off all electrical consumers (audio  
system, wipers, lighting, etc.),  
F switch off the ignition and wait for 4 minutes.  
At the battery, it is only necessary to  
disconnect the (+) terminal.  
Following reconnection  
Reconnecting the (+) terminal  
After each time that the battery has been  
reconnected, switch on the ignition and wait  
1 minute before starting the engine, to allow  
the electronic systems to initialise. However,  
if minor problems persist after this procedure,  
contact a PEUGEOT dealer or a qualified  
workshop.  
Quick-release terminal clamp  
Referring to the corresponding section, you  
must yourself reinitialise:  
Disconnecting the (+) terminal  
-
-
-
the remote control key,  
the date and time,  
the radio preset stations.  
F Raise the lever A fully.  
F Refit the open clamp B on the (+) terminal.  
F Push the clamp B fully down.  
F Lower the lever A to lock the clamp B.  
Towing  
Procedure for having your vehicle towed or for  
towing another vehicle using the towing eye.  
Do not force the lever as locking will not  
be possible if the clamp is not positioned  
correctly; start the procedure again.  
F Raise the lever A fully to release the  
clamp B.  
F Remove the clamp B by lifting it off.  
Before disconnecting  
Wait 2 minutes after switching off the ignition  
before disconnecting the battery.  
Close the windows and the doors before  
disconnecting the battery.  
140