Safety
F secure the upper strap hook to ring B.
F tighten the upper strap.
"ISOFIX" mountings
The seats, shown below, are fitted with ISOFIX
compliant mountings:
When fitting an ISOFIX child seat to the
left-hand rear seat of the bench seat,
before fitting the seat, first move the
centre rear seat belt towards the middle
of the vehicle, so as to avoid the seat
interfering with the operation of the seat
belt.
The mountings comprise three rings for each seat:
-
a ring B, located behind the seat and
identified by a marking, referred to as the
TOP TETHER, for fixing the upper strap.
An incorrectly installed child seat
compromises the child's safety in the
event of an accident.
Strictly observe the fitting instructions
provided in the user guide supplied with
the child seat.
This system prevents the child seat from tipping
forward in the event of a front impact.
This ISOFIX mounting system ensures fast,
reliable and safe fitting of the child seat in your
vehicle.
ISOFIX child seats are fitted with two latches
which are secured on the two rings A.
Some seats also have an upper strap which is
attached to ring B.
For information about the installation
possibilities for ISOFIX child seats in your
vehicle, refer to the summary table.
-
two rings A, located between the vehicle
seat backrest and cushion, indicated by
a marking,
To secure the child seat to the TOP TETHER:
F remove and stow the head restraint before
installing the child seat on the seat (refit it
once the child seat has been removed),
F pass the strap of the child seat behind
the seat backrest, centring it between the
apertures for the head restraint rods,
Recommended ISOFIX child
seats
Also consult the user guides from the child
seat's manufacturer to find out how to
install and remove the seat.
74
English