Ease of use and comfort -> Interior fittings for Your Peugeot 208 4 Door 2020

Ease of use and comfort  
as reducing the consumption of electrical  
current reduces fuel consumption.  
This feature can be programmed using a  
smartphone, via the  
MyPeugeot application.  
With PEUGEOT Connect Radio, the feature can  
only be programmed using a smartphone, via the  
application.  
For more information on Remotely operable  
features, refer to the corresponding section.  
Interior fittings  
3
Programmed heating  
(Electric)  
This function allows you to programme the  
vehicle to adjust the passenger compartment  
temperature to a pre-defined, non-modifiable  
temperature (approx. 21°C) before you enter the  
vehicle, on the days and times of your choice.  
Conditions for operation  
– Programmed heating is only activated with the  
ignition off and the vehicle locked.  
– The heating is not activated if the battery  
charge level is below 50%.  
Programming  
– If recurrent programming is activated (e.g.  
from Monday to Friday) and two successive  
heating sequences are performed without the  
vehicle being used, the programming will be  
deactivated.  
(With PEUGEOT Connect Nav)  
In the Climate > OPTIONS menu:  
Select Temperature conditioning.  
1. Grab handle  
2. Sun visor  
3. Glove box  
4. Door pockets  
5. Storage compartment or Storage  
compartment with flap or Wireless  
smartphone charger with flap (depending on  
version)  
► Press the top centre of the flap to open it.  
6. Storage compartment with 12 V accessory  
socket.  
► Press + to programme.  
► Select the time of entry into the vehicle and  
the desired days. Press OK.  
► Press ON to activate this programming.  
Heating begins approximately 45 minutes before  
the programmed time, and is maintained for 10  
minutes afterwards.  
You can define multiple programmings.  
Each one is saved in the system.  
To optimise battery life, we recommend  
programming with the vehicle plugged in.  
7. Cup holder  
8. Centre armrest with storage compartment  
Rear USB socket(s) (depending on version)  
51  
Ease of use and comfort  
These applications can be managed using the  
steering mounted controls or the audio system  
controls.  
causing faults such as poor radio reception or  
interference with displays in the screens.  
Sun visor  
With the ignition on, raise the concealing flap;  
the mirror is illuminated automatically.  
This sun visor is also equipped with a ticket  
holder.  
When the USB port is used, the portable  
device charges automatically.  
A message is displayed if the power drawn  
by the portable device exceeds the current  
supplied by the vehicle.  
Wireless smartphone  
charger  
Glove box  
To open the glove box, raise the handle.  
The glove box is lit when open.  
For more information on how to use this  
equipment, refer to the Audio equipment  
and telematics section .  
Never drive with the glove box open  
when a passenger is at the front. It may  
cause injury during sharp deceleration!  
12 V accessory socket  
USB sockets  
It allows wireless charging of a portable device  
such as a smartphone, using the magnetic  
induction principle, in accordance with the Qi 1.1  
standard.  
The portable device to be charged must be  
compatible with the Qi standard, either by design  
or by using a compatible holder or shell.  
The charging area is identified by the Qi symbol.  
The charger works with the engine running and  
with the Stop & Start system in STOP mode.  
Charging is managed by the smartphone.  
With Keyless Entry and Starting, the charger’s  
operation may be briefly disrupted when a door  
is opened or the ignition is switched off.  
► Always use the correct adapter to connect a  
12 V accessory (max. power: 120 W).  
They allow the connection of a portable device in  
order to recharge it.  
Observe the maximum power rating to  
avoid damaging your accessory.  
The front right USB port  
also allows a smartphone to  
be connected by MirrorLinkTM, Android Auto® or  
CarPlay®, enabling certain smartphone  
applications to be used on the touch screen.  
For best results, use a cable made or approved  
by the device manufacturer.  
The connection of an electrical device  
not approved by PEUGEOT, such as a  
USB charger, may adversely affect the  
operation of vehicle electrical systems,  
Charging  
► Open the flap to access the charging area.  
52  
Ease of use and comfort  
► With the charging area clear, place a device  
in its centre.  
The other mats are simply laid over the carpet.  
Courtesy lamps  
3
Removing/refitting  
The system is not designed to charge  
multiple devices simultaneously.  
Non-touch version with bulb  
To remove it on the driver's side, move the  
seat backwards and unclip the fasteners.  
To refit it, position the mat and secure it by  
pressing.  
► Check that the mat is secured correctly.  
To avoid any risk of jamming the pedals:  
– Only use mats which are suitable for  
the fasteners already present in the vehicle;  
these fasteners must be used.  
– Never fit one mat on top of another.  
The use of mats not approved by PEUGEOT  
may interfere with access to the pedals and  
hinder the operation of the cruise control/  
speed limiter.  
Do not leave any metal objects (coins,  
keys, vehicle remote control, etc.) in the  
charging area while a device is being  
charged, due to the risk of overheating or  
interrupting the charging process.  
1. Front courtesy lamp  
2. Front map reading lamps (depending on  
version)  
Mats  
Front courtesy lamp  
In this position, the courtesy lamp comes  
on gradually:  
The approved mats have two fasteners  
located underneath the seat.  
Fitting  
– when the vehicle is unlocked.  
– when the key is removed from the ignition  
switch.  
– when a door is opened.  
– when the remote control locking button is  
activated, in order to locate the vehicle.  
It switches off gradually:  
– when the vehicle is locked.  
– when the ignition is switched on.  
– 30 seconds after the last door is closed.  
Permanently off.  
When fitting the mat for the first time, on the  
driver's side use only the fasteners supplied in  
the enclosed sachet.  
53  

Related Topics