Child safety -> ISOFIX mountings for Your Peugeot 3008 SUV First Generation (2008-2015)

Child safety  
"ISOFIX" mountings  
Your vehicle has been approved in accordance with the latest ISOFIX regulations.  
The seats, represented below, are fitted with regulation ISOFIX mountings:  
To secure the child seat to the TOP TETHER:  
-
remove and stow the head restraint before  
installing the child seat on this seat (refit it  
after the child seat has been removed),  
remove the TOP TETHER cover by pulling  
at its cut-out,  
pass the child seat strap behind the seat  
backrest, centred between the holes for the  
head restraint rods,  
-
-
-
-
secure the upper strap fixing to the ring B,  
tighten the upper strap.  
The ISOFIX mountings are three rings for each  
seat:  
This ISOFIX mounting system ensures fast,  
reliable and safe fitting of the child seat in  
your vehicle.  
-
two rings A, located between the vehicle seat  
The incorrect installation of a child seat  
in a vehicle compromises the child's  
protection in the event of an accident.  
Observe strictly the fitting instructions  
provided with the child seat.  
back and cushion, indicated by a marking,  
The ISOFIX child seats are fitted with two  
latches which are secured easily on the two  
rings A.  
-
a ring B, located under a cover on the back  
of the top of the seat backrest, referred to as  
the TOP TETHER for fixing the upper strap.  
Its position is indicated by a marking.  
Located on the back of the seat backrest, the  
top tether is used to secure the upper strap of  
child seats that have one. This device limits  
forward tipping of the child seat, in the event of  
a front impact.  
Some also have an upper strap (or top tether)  
which is attached to ring B.  
For information on the possibilities  
for fitting ISOFIX child seats to your  
vehicle, refer to the table of seating  
positions.  
118  
Child safety  
ISOFIX child seat  
Recommended by PEUGEOT and approved for your vehicle  
ISOFIX child seat with TOP TETHER  
RÖMER Duo Plus ISOFIX  
(size category B1)  
Group 1: from 9 to 18 kg  
6
Installed only in the forward facing position.  
Is attached to the rings A, as well as the ring B, referred to as the TOP TETHER, using an upper strap.  
Three seat body angles: sitting, reclining, lying.  
This child seat can also be used on seats which are not fitted with ISOFIX mountings.  
In this case, it must be attached to the vehicle seat using the three point seat belt.  
Adjust the front seat of the vehicle so that the child's feet do not touch the backrest.  
Follow the instructions for fitting the child seat given in the seat manufacturer's installation guide.  
119  
Child safety  
Locations for installing ISOFIX child seats  
In accordance with European Regulations, this table indicates the options for installing ISOFIX child seats on seats in the vehicle fitted with ISOFIX  
mountings.  
In the case of universal and semi-universal ISOFIX child seats, the ISOFIX size category, determined by a letter from A to G, is indicated on the child  
seat next to the ISOFIX logo.  
Weight of the child / indicative age  
Less than 10 kg  
Less than 10 kg  
(group 0)  
Less than 13 kg  
(group 0+)  
(group 0)  
Up to approx.  
6 months  
From 9 to 18 kg (group 1)  
From approx. 1 to 3 years  
Up to approx. 1 year  
Type of ISOFIX child seat  
ISOFIX size category  
Shell  
rearward facing  
rearward facing  
forward facing  
F
G
C
D
X
E
C
D
A
B
B1  
Front passenger seat  
Outer rear seats  
X
X
X
X
IL-SU*  
X
X
IUF*  
IL-SU*  
IL-SU*  
Centre rear seat  
X
X
IUF: seat suitable for the installation of an Isofix Universal seat, Forward facing secured using the upper strap.  
IL-SU: seat suitable for the installation of an Isofix Semi-Universal seat either:  
-
-
-
rearward facing fitted with an upper strap or a support leg,  
forward facing fitted with a support leg,  
a shell seat fitted with an upper strap or a support leg.  
For advice on securing the upper strap refer to the section on "Isofix mountings".  
X: seat not suitable for the installation of a child seat or shell for the weight group indicated.  
* Child seats with a support leg should be fitted to your vehicle with care. Refer to the section on fitting a child seat with a support leg.  
120  
Child safety  
Recommendations  
Child seats  
Installing a booster  
cushion  
The incorrect installation of a child seat in a  
vehicle compromises the child's protection in  
the event of an accident.  
Check that there is no seat belt or seat belt  
buckle under the child seat as this could  
destabilise it.  
Remember to fasten the seat belts or the  
child seat harnesses keeping the slack in  
relation to the child's body to a minimum,  
even for short journeys.  
For optimum installation of the forward facing  
child seat, ensure that the back of the child  
seat is as close as possible to the backrest of  
the vehicle's seat, or in contact if possible.  
The head restraint must be removed before  
installing a child seat with a backrest on the  
passenger seat.  
Ensure that the head restraint is stowed or  
attached securely so that it is not thrown around  
the vehicle in the event of sharp braking.  
The chest part of the seat belt must be  
positioned on the child's shoulder without  
touching the neck.  
Ensure that the lap part of the seat belt  
passes correctly over the child's thighs.  
PEUGEOT recommends the use of a booster  
seat which has a back, fitted with a seat belt  
guide at shoulder level.  
6
For the installation of a child seat using a seat Refit the head restraint as soon as the child  
belt, ensure that this is well tensioned on the  
child seat and that it is holding the child seat  
firmly against the seat of your vehicle. If your  
front passenger seat is adjustable, move it  
forward if necessary.  
seat is removed.  
As a safety precaution, do not leave:  
-
one or more children alone and  
unsupervised in a vehicle,  
a child or an animal in a vehicle which  
is exposed to the sun, with the windows  
closed,  
Children at the front  
-
The legislation on carrying a child on the front  
passenger seat is specific to each country.  
Refer to the legislation in force in the country  
in which you are driving.  
Deactivate the passenger's front airbag when  
a rearward facing child seat is installed on  
the front passenger seat. Otherwise, the child  
would risk being seriously injured or killed if  
the airbag were deployed.  
At the rear seats, always leave sufficient  
space between the front seat and:  
-
the keys within reach of children inside  
the vehicle.  
-
-
a rearward facing child seat,  
the feet of a child seated in a forward  
facing child seat.  
To prevent accidental opening of the doors,  
use the child lock.  
Take care not to open the rear windows by  
more than one third.  
To protect young children from the rays of the  
sun, fit side blinds on the rear windows.  
For this, move the front seat forward and if  
necessary straighten its backrest.  
121