MY CAR USER MANUAL

Driving -> Cruise control for Your Peugeot 3008 SUV First Generation (2008-2015)

Driving

Cruise control

System which automatically maintains the

speed of the vehicle at the value programmed

by the driver, without any action on the

accelerator pedal.

Steering mounted controls

Displays in the instrument panel

The cruise control is switched on manually: it

requires a minimum vehicle speed of 25 mph

(40 km/h) and the engagement of:

-

-

fourth gear on the manual gearbox,

second gear in manual mode on an

electronic or automatic gearbox,

position A on an electronic gearbox or D

on an automatic gearbox.

-

The controls of this system are grouped

together on stalk A.

1. Cruise control mode selection wheel

2. Speed programming / programmed value

decrease button

The cruise control is switched off manually

or by pressing the brake or clutch pedal or on

triggering of the DSC/ASR systems for safety

reasons.

8

3. Speed programming / programmed value

increase button

The programmed information is grouped

together in the instrument panel screen.

5. Cruise control off / resume indication

6. Cruise control mode selection indication

7. Programmed speed value

4. Cruise control off / resume button

It is possible to exceed the programmed speed

temporarily by pressing the accelerator pedal.

To return to the programmed speed, simply

release the accelerator pedal.

The cruise control cannot, in any

This information also appears in the

head-up display.

For more information, refer to the

"Head-up display" section.

circumstances, replace the need to observe

speed limits, nor can it replace the need for

vigilance on the part of the driver.

Switching off the ignition cancels any

programmed speed value.

155

Driving

Programming

F

Set the programmed speed by accelerating

to the required speed, then press button 2

or 3 (e.g.: 70 mph (110 km/h)).

F

Switch off the cruise control by pressing

button 4: the display confirms that it has

been switched off (OFF/Pause).

You can then change the programmed speed

using buttons 2 and 3:

-

-

-

by + or - 1 mph (km/h) = short press,

by + or - 5 mph (km/h) = long press,

in steps of + or - 5 mph (km/h) = maintained

press.

F

Turn dial 1 to the "CRUISE" position: the

cruise control mode is selected but is not

switched on (OFF/Pause).

F

Switch the cruise control back on by

pressing button 4 again.

156

Driving

Exceeding the programmed Return to normal driving

speed

When the cruise control is switched on,

be careful if you maintain the pressure

on one of the programmed speed

changing buttons: this may result in

a very rapid change in the speed of

your vehicle.

Do not use the cruise control on

slippery roads or in heavy traffic.

On a steep descent, the cruise control

will not be able to prevent the vehicle

from exceeding the programmed speed.

To avoid any risk of jamming of the

pedals:

Intentional or unintentional exceeding of the

programmed speed results in flashing of this

speed in the screen.

Return to the programmed speed, by means of

intentional or unintentional deceleration of the

vehicle, automatically cancels the flashing of

the speed.

F

Turn dial 1 to the "0" position: the cruise

control mode is deselected. The display

returns to the distance recorder.

-

ensure that the mat is positioned

correctly,

Operating fault

8

-

never fit one mat on top of another.

In the event of a cruise control malfunction,

the speed is cleared resulting in flashing of the

dashes.

Have it checked by a PEUGEOT dealer or a

qualified workshop.

157

Related Topics

Driving

Automatic gearbox

Gear shift indicator

Reversing camera

Driving recommendations

Starting-switching off the engine

Hill start assist

Head-up display

Speed limiter

Manual gearbox