Get Fittings Guide for Peugeot 3008 SUV First Generation (2008-2015)

Fittings

Interior ﬁttings

1. Spectacles storage

2. Sun visor

3. Grab handle with coat hook

4. Storage compartment

5. Storage compartment below the

steering wheel

6. Storage compartment

7. Console grip handle

8. Storage compartment with net

9. Illuminated glove box

10. Door pockets

11. Front 12 V accessory socket (120 W)

12. Cup holder

13. Front armrest with storage

compartment

14. Storage compartment

15. Rear 12 V accessory socket (120 W)

94

Fittings

Sun visor

Driver's storage

compartments

Illuminated glove

box

5

Component which protects against sunlight

from the front or the side, also equipped with an

illuminated vanity mirror.

This has storage areas, audio sockets for a

portable player, ...

Storage box

This has storage areas for the handbook

F

To open the glove box, raise the handle.

pack, ...

F

With the ignition on, raise the concealing

flap; the mirror is illuminated automatically.

The lamp comes on when the lid is opened.

F

To open, pull the handle then tilt the box.

This sun visor is also equipped with a ticket

holder.

Card holder

This can be used for a toll payment ticket or

parking card, for example.

To connect a portable player refer to the

"Audio and telematics" section.

Storage

Coin storage

95

Fittings

Front armrest

PEUGEOT Connect USB

Comfort and storage device for the driver and

front passenger.

F

Raise the cover on the left.

Storage

This connection unit consists of a JACK

auxiliary socket and/or a USB port.

Connected to the USB port, the portable device

charges automatically.

It permits the connection of a portable device,

such as a digital audio player of the iPod^®type

or a USB memory stick.

While charging, a message is displayed if the

current consumption by the portable device

exceeds the power rating of the port.

It reads the audio file formats (mp3, ogg, wma,

wav...) which are transmitted to your audio

system and played via the vehicle's speakers.

You can manage these files using the steering

mounted controls or the audio system control

panel and display them in the multifunction

screen.

A ventilation outlet distributes cooled air.

For more information on the use of

this equipment, refer to the "Audio and

telematics" section.

96

Fittings

12 V accessory

sockets

Mats

Removable carpet protection.

Refitting

To refit the mat on the driver's side:

F

position the mat correctly,

refit the fixings by pressing,

check that the mat is secured correctly.

To avoid any risk of jamming of the

pedals:

5

-

only use mats which are suited to

the fixings already present in the

vehicle; these fixings must be used,

never fit one mat on top of another.

-

The use of mats not approved by

F

To connect a 12 V accessory (max power:

120 Watts), remove the cover and connect

a suitable adaptor.

Fitting

PEUGEOT may interfere with access to

the pedals and hinder the operation of

the cruise control / speed limiter.

The mats approved by PEUGEOT have

two fixings located below the seat.

When fitting the mat for the first time, on the

driver's side use only the fixings provided in the

wallet attached.

The other mats are simply placed on the

carpet.

Exceeding the maximum power could result in

damage to your accessory.

The connection of an electrical device

not approved by PEUGEOT, such as a

USB charger, may adversely affect the

operation of vehicle electrical systems,

causing faults such as poor telephone

reception or interference with displays

in the screens.

Removal

To remove the mat on the driver's side:

F

move the seat as far back as possible,

unclip the fixings,

remove the mat.

97

Fittings

Rear multimedia

Description

The pack includes:

-

the connection and control panel fitted on

the rear face of the centre console,

two 7-inch screens built into the front head

restraints (with protective covers),

two wireless Bluetooth technology

headphone sets with rechargeable

batteries,

-

a 12 V charger with two outlets allowing the

simultaneous charging of two headphones.

This multimedia system allows rear passengers

to connect one or two external portable

systems (audio or video player, games

consoles, DVD player...). The sound is played

through two Bluetooth^®wireless headphone

sets, while the video content is displayed in

two 7-inch screens built into the backs of the

front seat head restraints.

1. Power switch

2. AV1 video input (yellow RCA socket)

3. Stereo audio input A (red and white

RCA sockets)

4. AV2 video input (yellow RCA socket)

5. Stereo audio input B (red and white

RCA sockets)

6. Selection of display in the left hand screen

(AV1 or AV2)

7. Selection of display in the right hand

screen (AV1 or AV2)

8. Connection indicator lamps for the

Bluetooth audio headphones (blue)

This system operates only with the

engine running.

98

Fittings

F

It is possible at any time to modify the

Operation

source for the video display (using button 6

or 7 on the control panel: the indicator lamp

for the source selected comes on) as well

as the audio channel (using the selector on

the headphones).

The Multimedia system allows the

connection of a third Bluetooth

headphone set, not supplied.

5

1. Screen power switch

2. Display adjustment buttons

F

With the engine running, connect your

portable system to the RCA connectors

(e.g. with AV1 on the left).

Press the switch on the control panel,

the indicator lamp comes on and the AV1

indicator lamps come on.

Each headphone set has a switch,

a connection indicator lamp (blue)

and a channel selector (A or B).

F

Make a long press on the switch, its

indicator lamp flashes in blue.

Make a long press on the control panel

switch, the pairing with the headphone set

is complete when the blue indicator lamps

on the headphones and on the system are

on continuously.

If your seat is in the table position,

position a cover to avoid damaging the

screen.

These covers also conceal each

screen.

F

Repeat the operation for the other

headphone set.

Press the screen switch if you have a video

source.

Start playing your portable system.

99

Fittings

Storage compartments Rear armrest

Ski ﬂap

Comfort and storage device for the rear

Arrangement for storing and transporting long

objects.

under the rear footwells

passengers.

Opening

Depending on the configuration, the vehicle

has storage compartments under the footwells,

located forward of the outer rear seats. Access

is via clipped flaps with a handle A.

F

Lower the rear armrest for a more

comfortable position.

F

Lower the rear armrest.

Pull the flap handle downwards.

Lower the flap.

Load the objects from inside the boot.

The armrest incorporates two cup holders.

100

Fittings

Panoramic sunroof

It has a blind that can be used to improve temperature and noise related comfort in the passenger

compartment.

Motorised blind

Depending on version, the blind is opened and closed using:

-

button A on the centre console,

button B on the dashboard.

5

Manual mode

Maintaining pressure on the control opens or

closes the blind: movement stops if you release

the control. Pressure on the control in the

opposite direction reverses the movement.

With button A:

With button B:

-

pull the control to open the blind,

push the control to close the blind.

-

lower the control to open the blind,

raise the control to close the blind.

Automatic mode

Pressing and releasing the control opens or

closes the blind completely. Pressing again

stops the movement.

The control is operational with the ignition

on and for 45 seconds after switching off the

ignition.

101

Fittings

Safety anti-pinch

If the blind opens on its own while

In automatic mode and at the end of its travel,

if the blind meets an obstacle while closing it

stops and moves back slightly.

closing, and immediately after it stops.

F

Operate the control until the blind is

fully open.

Operate the control until the blind is

fully closed.

Reinitialisation: after reconnecting the battery

or in the event of a fault while the blind is

moving, it may be necessary to reinitialise the

system:

The safety anti-pinch function is not

operational during these operations.

F

Operate the control until the blind is fully

closed or open.

F

Continue to press for at least 3 seconds.

A slight movement of the blind will then be

noticeable, confirming the reinitialisation.

If the blind meets an obstacle during

operation, you must reverse the

movement of the blind.

When the driver operates the blind

control, they must ensure that nothing

and no one is preventing the correct

closing of the blind.

The driver must ensure that passengers

use the blind correctly.

Be aware of children when operating

the blind.

102

Fittings

Boot ﬁttings

1. Load space cover

2. Hooks

3. 12 V accessory socket (120 W)

4. Rear seats folding controls

5. Adjustable boot

(3 position floor)

5

6. Stowing rings on the floor

7. Storage pockets

103

Fittings

Load space cover

To remove it:

F

fold the load space cover as described

above,

To fold it:

F

unhook the two cords,

fold it concertina-style to the rear seats.

unclip the fixings on the left and on the

right by pushing gently,

place your hands as shown on the

illustration then pull the assembly towards

you.

This consists of three sections which can be

folded back on each other.

104

Fittings

Hooks

5

To store it at the bottom of the boot:

To put it back in place:

The hooks can be used to secure shopping

bags.

F

remove the load space cover as described

above,

F

take hold of the load space cover with both

hands then place it on its support,

unfold it to the boot pillars,

F

place the floor at an angle,

F

When changing a wheel

place the load space cover in its location

(recess marked A), at bottom of the boot,

the load space cover will be protected

if you place the floor in the intermediate

position.

hook the two cords,

if necessary, press on the top of the load

space cover, on the left and on the right, to

engage the fixings.

The hooks facilitate access to the spare

wheel, retaining the boot carpet by

means of the two cords.

F

105

Fittings

12 V accessory socket

Luggage retaining net

Storage box

Hooked onto the stowing rings on the movable

boot floor, the luggage retaining net available

as an accessory enables you to secure your

luggage.

Observe the loads indicated on the side of the

boot, in accordance with the position of the

movable floor.

For safety reasons in case of sharp braking, we

recommend that heavy objects are placed on

the floor as close as possible to the back of the

rear seats.

F

To connect a 12 V accessory (max power:

120 W), remove the cap and connect an

appropriate adaptor.

F

Raise the boot carpet, hooking the

two cords on the hooks, then gain access

to the storage box.

Turn the key to the ignition on position.

Depending on the configuration, this has areas

for storing:

-

a box of spare bulbs,

a first aid kit,

a tyre repair kit,

two warning triangles,

...

106

Fittings

Adjustable boot floor

5

This three position floor allows you to optimise

the volume of the boot by means of the guides

placed on the sides:

To place and support the floor at an angle:

F

From the high position, raise the floor

towards the load space cover.

Do not hesitate to pass the two retractable

stops then place the floor back on these

two stops.

-

High position (50 kg max): the floor is level

with the closed lower tailgate.

You can load objects while keeping an area

protected and isolated.

F

The floor is equipped with four stowing rings

to secure your luggage, observing the loads

indicated (in the boot).

-

Intermediate position (100 kg max): the

floor is level with the open lower tailgate.

You obtain a flat floor to the front seats

when the rear seats are in the retracted

position.

To change the height of the floor:

-

Low position (150 kg max): maximum boot

volume.

On certain versions, the adjustable boot

floor cannot be fitted in the low position.

F

Push the floor fully forwards then, with the

help of the support stops A, move the floor

to the position required.

107

Fittings

Rear side blinds

Fitted on the rear windows, these protect your

young children from the sun.

F

Pull the blind by the central tab.

Position the blind attachment on the hook.

108

Fittings for Your Peugeot 3008 SUV First Generation (2008-2015)

Related Topics