Get Visibility -> Lighting controls Guide for Peugeot 3008 SUV First Generation (2008-2015)

Visibility

Lighting controls

Main lighting

Additional lighting

Function settings

The various front and rear lamps of the vehicle

are designed to adapt the lighting progressively

in relation to the climatic conditions and so

improve the driver's visibility:

Other lamps are installed to fulfil the

You can activate / deactivate the following

requirements of particular driving conditions:

lighting functions:

-

a rear foglamp to be seen from a distance,

front foglamps for even better visibility,

daytime running lamps to be seen during

the day.

-

automatic guide-me-home lighting,

automatic illumination of headlamps,

directional lighting.

-

sidelamps, to be seen,

dipped beam headlamps to see without

dazzling other drivers,

4

-

main beam headlamps to see clearly when

the road is clear,

directional headlamps for improved

visibility when cornering.

Travelling abroad

If using your vehicle in a country that

drives on the other side of the road, the

headlamps must be adjusted to avoid

dazzling on-coming drivers.

Contact an official dealer or a qualified

workshop.

In some weather conditions (e.g. low

temperature or humidity), the presence

of misting on the internal surface of the

glass of the headlamps and rear lamps

is normal; it disappears after the lamps

have been on for a few minutes.

77

Visibility

Manual controls

Displays

Illumination of the corresponding indicator

lamp in the instrument panel confirms that the

lighting selected is on.

The lighting is controlled directly by the driver

by means of the ring A and the stalk B.

A. Main lighting mode selection ring: turn it

to position the symbol required facing

the mark.

Lighting off (ignition off) /

Daytime running lamps (engine running).

Automatic illumination of

headlamps.

Model without AUTO lighting

Sidelamps.

Dipped headlamps or main beam headlamps.

B. Stalk for switching headlamps: pull

the stalk towards you to switch the

lighting between dipped and main beam

headlamps.

In the lamps off and sidelamps modes, the

driver can switch on the main beam headlamps

temporarily ("headlamp flash") by maintaining a

pull on the stalk.

Model with AUTO lighting

78

Visibility

C. Foglamp selection ring.

Rear foglamp

Front and rear foglamps

This operates with dipped and main beam

headlamps.

The rear foglamp operates with the dipped and

main beam headlamps.

The front foglamps also operate with the

sidelamps.

4

F

To switch on the foglamp, turn the ring C

forward and release.

F

To switch off the foglamp, turn the ring C

rearward and release.

F

To switch on the front foglamps, turn the

ring C forward and release.

To switch on the rear foglamp, turn the

ring C forward again and release.

To switch off the rear foglamp, turn the

ring C rearward and release.

When the lighting is switched on automatically

(with AUTO model), the dipped beam

headlamps and sidelamps remain on until the

rear foglamp is switched off.

Model with rear foglamp only

To switch off the front foglamps, turn the

ring C rearward again and release.

When the lighting is switched on automatically

(with AUTO model), the dipped beam

headlamps and sidelamps remain on until the

rear foglamp is switched off.

When the lighting is switched off automatically

(with AUTO model) or when the dipped beam

headlamps are switched off manually, the

foglamps and the sidelamps will remain on.

Model with front and rear

foglamps

79

Visibility

Switching off the lighting when

switching off the ignition

When the ignition is switched off, all of the

lamps switch off immediately, except for the

dipped beam headlamps if automatic guide-

me-home lighting is activated.

Switching on the lighting when

switching on the ignition

To reactivate the lighting control stalk, turn the

ring A to position "0" - lighting off, then to the

position of your choice.

When the driver's door is opened, a temporary

audible signal warns you that the vehicle's

lighting is on.

They switch off automatically after a period

which depends on the state of charge of the

battery (entry to energy economy mode).

In good or rainy weather, by both day

and night, the front foglamps and the

rear foglamps are prohibited. In these

situations, the power of their beams

may dazzle other drivers. They should

only be used in fog or falling snow.

In these weather conditions, you should

switch on the foglamps and dipped

beam headlamps manually, as the

sunshine sensor may detect sufficient

light.

Do not forget to switch off the front and

rear foglamps when they are no longer

necessary.

80

Visibility -> Lighting controls for Your Peugeot 3008 SUV First Generation (2008-2015)

Related Topics

Visibility