2024-2025 Peugeot 3008 SUV PEUGEOT i-Connect Advanced - PEUGEOT i-Connect -> Media User Manual

MY CAR USER MANUAL

PEUGEOT i-Connect Advanced - PEUGEOT i-Connect -> Media for Your Peugeot 3008 SUV Third Generation (2024-2025)

PEUGEOT i-Connect Advanced - PEUGEOT i-Connect  
smartphone has to be followed for the first  
connection, with the vehicle stationary.  
The smartphone charges when connected by the  
USB cable.  
The cable connection allows you to avoid  
disconnections, especially when passing through  
toll booths.  
If the device has already been connected to the  
system via Bluetooth®, select the device settings  
from the list of known devices and choose  
Android Auto as the wireless connection mode.  
The subsequent automatic connection of the  
smartphone requires activation of Bluetooth® on  
your device.  
As soon as the connection is established,  
press this button to display the "Android  
Auto" interface.  
Android Auto smartphone  
connection  
Connecting just one Android Auto smartphone  
can be carried out either by USB cable or using  
a wireless connection.  
11  
First install the "Android Auto"  
application via "Play Store" on your  
smartphone.  
The "Android Auto" function requires a  
compatible smartphone.  
If the device fails to connect, refer to the  
Android Auto website to check that the device  
is compatible with this function.  
Only one USB socket enables the Mirror  
Screen® connection (Android Auto); refer  
to the "Ease of use and comfort - Fittings"  
section.  
It is recommended that you use the device's  
original USB cables, preferably with a short  
cable to ensure optimum performance.  
To initiate the smartphone voice  
commands, press and hold the steering-  
mounted control button.  
If the problem persists, delete all saved  
connections on the smartphone and on the  
system before attempting a new connection.  
To ensure an optimum wireless connection,  
we recommend avoiding placing your  
smartphone too close to other Wi-Fi networks  
to which it can connect automatically.  
Media  
The wireless connection of an Android Auto  
smartphone can be initiated from the "My  
Devices" menu.  
First activate the smartphone’s Android Auto®  
wireless function, in the Settings menu of the  
"Android Auto" application of your smartphone.  
Press the "Settings" application.  
Changing source  
Press the "Media" application.  
Press this button to change source (radio,  
audio streaming via a USB socket,  
Bluetooth® or Mirror Screen®).  
The cable connection requires that you  
deactivate the Android Auto wireless function,  
in the Settings menu of the "Android Auto"  
application of your smartphone.  
Connect the smartphone to the system  
using the USB socket compatible with  
Mirror Screen®.  
Using the steering-mounted controls,  
press this button to change source.  
In the list, select the "Connectivity" tab.  
Select "My Devices" to display the device  
to be connected to Android Auto.  
If the device has never been connected to the  
system before, it will have to be paired (refer to  
the "Bluetooth® connection" section).  
Selecting a radio station  
Press the "Media" application.  
Android Auto is automatically launched a few  
seconds after the USB connection has been  
established. A validation procedure on the  
In the list, select the "Player" tab.  
Press one of the buttons to  
perform an automatic search for  
radio stations.  
The system detects if the smartphone is  
compatible with Android Auto and offers to  
connect to it following the pairing process.  
221  
CarManuals2.com  
PEUGEOT i-Connect Advanced - PEUGEOT i-Connect  
Or  
Storing takes place via a short or long  
press on one of these buttons, or a long  
Press this button to change the waveband  
(FM - AM - DAB) according to the country  
Move the slider to manually search for  
frequencies up or down.  
press on an existing favourite radio station,  
which will be replaced.  
of sale.  
Or  
Activating traffic  
announcements  
Press this button.  
Press this button to return to the previous  
page.  
Enter the frequency values using the  
virtual keypad.  
Press this button to confirm.  
This function gives priority to listening to Traffic  
announcements alert messages. To be active,  
this function needs good reception of a radio  
station that transmits this type of message.  
While traffic information is being broadcast, the  
current radio station is automatically interrupted  
so that the message can be heard. Normal radio  
listening resumes as soon as the message is  
finished.  
Automatic search for radio  
stations  
Via the "Media" application.  
Press the "Media" application.  
A list of stations is available by pressing the  
“Stations” tab.  
Press “Mute” to activate/deactivate the  
sound.  
In the list, select the "Stations" tab.  
The search is carried out automatically.  
Radio reception may be affected by the  
use of electrical equipment not approved  
by the Brand, such as a charger with USB  
socket connected to the 12 V socket.  
The exterior environment (hills, buildings,  
tunnels, basement car parks, etc.) may block  
reception, including in RDS mode. This  
phenomenon is normal in the propagation  
of radio waves and does not indicate any  
malfunction of the system.  
Activating radio station  
tracking  
The system changes frequency automatically to  
obtain better reception.  
Press the "Media" application.  
In the list, select the "Settings” tab.  
Activate “Traffic Announcement (TA)”.  
Press the "Media" application.  
The lighting of the slider confirms that the  
function is activated.  
In the list, select the "Settings” tab.  
Activate “Radio Station Tracking”.  
Audio streaming  
The streaming function allows you to listen to  
the audio stream coming from the smartphone(s)  
connected via Bluetooth®, USB (iPod® type) or  
Mirror Screen®.  
First adjust the volume on the portable device (to  
a high level).  
The lighting of the slider confirms that the  
function is activated.  
Storing a radio station  
Select a station.  
Changing the waveband  
Press the "Media" application.  
Press the "Media" application.  
In the list, select the "Player” tab.  
Press the "Radio Favorites" button.  
Then adjust the volume of the system.  
In the list, select the "Player" tab.  
222  
CarManuals2.com  
PEUGEOT i-Connect Advanced - PEUGEOT i-Connect  
If playback does not start, it may be necessary to  
start the audio playback from the smartphone.  
Control is from the portable device or by using  
the system's touch buttons.  
Press the "Media" application.  
We recommend using the original USB  
cable for the portable device.  
11  
In the list, select the "Settings" tab.  
Or  
Via the Settings application  
Press the "Settings" application.  
Phone  
Once connected in streaming mode, the  
smartphone is considered to be a media  
source.  
Receiving a call  
An incoming call is announced by a ring and a  
display overlaid on the screen.  
Accepting the call:  
briefly press the telephone button on the  
steering-mounted controls to accept an  
incoming call.  
In the list, select the "Audio and Radio" tab.  
It is possible to configure:  
– Sound Settings.  
– Radio Settings.  
– Volume Settings.  
Playing a track  
Press the "Media" application.  
If several devices are connected, press  
this button to select one.  
Once the device is connected, browsing through  
the files is possible by pressing the "Playlist" or  
"Library" button.  
Information and advice  
The system supports USB Mass Storage devices  
or Apple® devices via the USB sockets. The  
adapter cable is not supplied.  
Devices are managed using the audio system  
controls.  
Or  
Press this touch screen button.  
Ending the call:  
press and hold...  
Short press: go to the previous/  
next track.  
The system will only play audio files with ".wma,  
.aac, .flac, .ogg, .mp3" file extensions, at bit rates  
between 32 Kbps and 320 Kbps.  
Long press: fast-forward/rewind in a track.  
Repeat the current title or the list of  
selected titles.  
...the telephone button on the steering-  
mounted controls to refuse the call.  
Or  
It also supports VBR (Variable Bit Rate) mode.  
No other file types (".mp4", etc.) can be read.  
".wma" files must be of the WMA 9 standard.  
The supported sampling rates are 32, 44 and  
48 KHz.  
To avoid reading and display problems, we  
recommend choosing file names less than 20  
characters long that do not contain any special  
characters (e.g. “ ? . ; ù).  
Random track playback.  
Press this touch screen button.  
Sound deactivation/reactivation.  
Press this button on the touch screen to  
send an automatic message indicating  
that you are driving.  
Configuring audio and radio  
settings  
Audio settings can be accessed in 2 different  
ways.  
Making a call  
Using the telephone is strongly  
discouraged while driving.  
Park the vehicle.  
Use only USB memory sticks in FAT32 format  
(File Allocation Table).  
Via the Media application  
223  
CarManuals2.com  

Related Topics

PEUGEOT i-Connect Advanced - PEUGEOT i-Connect

First steps
Personalisation
Applications
Navigation
Connectivity
Mirror Screen
Phone