Get MAINTENANCE & CARE Guide for Peugeot 306 4 Door First Generation (1993-2002)

124

SPECIAL FEATURES

To unlock the doors and boot

or tailgate

Place the ignition key in the lock of

one of the front doors and turn it

towards the front of the vehicle.

1

Alternatively, press button 2 on the

remote control.

2

Important

After deadlocking, anybody inside

the car, and without the remote

control, will not be able to get out

by themselves. The doors can

only be unlocked by using the

remote control, or the ignition key

in the door lock.

If the battery is disconnected

deadlocking remains activated. It

is still possible to open one of the

front doors using the ignition key,

but the key will only open that par-

ticular door.

DEADLOCKING*

Deadlocking is an additional security device which means that the interior and

exterior door controls cannot open the doors, when deadlocked.

Deadlocking can be carried out in two ways:

- With the remote control.

- With the ignition key.

To operate deadlocking

After locking the doors you have five seconds in which to operate the dead-

locking.

If using the remote control:

- press button 1 once to lock your vehicle, the direction indicators stay on for

2 seconds.

- press button 1 for a second time within the five seconds to deadlock your vehi-

cle, the direction indicators flash once.

- press button 2 to unlock your vehicle, the direction indicators flash several times.

If using the ignition key, keep the key in the lock of one of the front doors, with the

key turned towards the rear of the vehicle (turn the key towards the front to unlock).

* According to specification.

Downloaded from www.Manualslib.com manuals search engine

125

SPECIAL FEATURES

To programme the remote

control(s)

To programme the deadlocking

To check that programming

has been correctly carried out:

- press button 1 on the remote con-

trol key (or one of the remote con-

trol keys*).

- the doors and boot or tailgate will

lock.

- if this is not the case: repeat the

programming.

Do not operate the dead-

locking if there is some-

one inside the vehicle.

remote controls key(s) (on first use):

- the doors must be unlocked.

Keep your key reference

- use the key with remote control to

turn on the ignition (to position A

“accessories”).

- immediately press the large button

on the key.

- turn off the ignition.

number in a safe place.

This will enable you to order a

new key if the key is lost or stolen.

Check that the batteries are in

good condition.

If the red indicator light comes on

this indicates correct operation of

the transmitter but not that the

doors have been opened or

locked; wait at least one second

between each attempt.

* According to specification.

Downloaded from www.Manualslib.com manuals search engine

126

SPECIAL FEATURES

ALARM SYSTEM*

To set the alarm (exterior and

interior protection)

The ignition must be switched off.

To disarm the alarm (exterior

and interior protection)

Press the unlocking button on the

Setting and disarming the

alarm

remote control.

You must be outside the vehicle

The doors unlock.

Press the locking button of the

remote control key (if your vehicle

has deadlocking, you then need to

press this button again).

The doors will lock.

The direction indicators come on

continuously for two seconds.

The red lamp on the switch flashes

once a second.

Five seconds afterwards : the exteri-

or protection is set.

Switching off the siren

The alarm completes the security

equipment of your vehicle. It com-

prises two types of protection:

The direction indicators flash for two

seconds.

The red lamp on the switch goes out.

Note : if the lamp continues to flash

after disarming the alarm, it is

because it has been triggered. This

flashing will stop on switching on the

ignition.

- exterior protection: when this is

set, the alarm sounds if a door,

the bonnet, the boot or the tail-

gate are opened.

- interior sensor protection: when

it is set, the alarm sounds if the

sensors detect a variation in the

air movement inside the vehicle

(breaking of a window) or a

movement inside the vehicle.

Fifty seconds afterwards : the interi-

or protection is set.

Note : when the alarm is triggered,

the siren sounds for thirty seconds.

It is also equipped with an anti-

tamper function.

It then stops, but the alarm remains

set.

If an attempt is made to neutralise

the leads to the siren, the central

control or the battery:

- the alarm is triggered,

- the siren sounds, the headlights

come on*.

Warning

If, on setting the alarm, a door, the

boot, tailgate or the bonnet are not

properly closed, the siren will be trig-

gered briefly. If the vehicle is proper-

ly closed within forty five seconds

after this, the alarm is set, the direc-

tion indicators come on continuously

for two seconds.

In all cases the alarm is set forty five

seconds afterwards.

* According to specification.

Downloaded from www.Manualslib.com manuals search engine

127

SPECIAL FEATURES

Selecting the type of

protection

Locking without setting the alarm

Special precautions

To set the alarm with exterior pro-

tection only

If, while you are away from the vehi-

cle, you wish to leave a window par-

tially open or a pet inside the vehicle,

you should choose exterior protec-

tion only. In this case :

To lock the vehicle without

setting the alarm

It is the remote control which sets the

alarm.

Therefore, if you wish to lock the

vehicle without setting the alarm,

use the key.

To charge or replace the battery :

- Switch on the ignition.

- Within ten seconds after switching

on the ignition press the interior

protection switch 1 and keep it

pressed for two seconds.

- The indicator light flashes rapidly

for three seconds.

- Switch off the ignition.

1

- Switch off the ignition.

- Press the interior protection switch

1 until the lamp comes on continu-

ously.

- Get out of the vehicle.

- Press the locking button (or the

deadlocking button if the vehicle is

fitted with this) on the remote con-

trol.

- The doors will lock.

- The direction indicators come on

continuously for two seconds.

- The red lamp on the switch

flashes once a second.

To disarm the alarm on exterior pro-

tection only.

- You can then disconnect the bat-

tery.

After reconnecting the battery :

- Lock, then unlock, the vehicle,

using the remote control.

Emergency cut-off

(Failure of the remote control)

Unlock the doors with the key.

Open the door.

The alarm is triggered. You then

have ten seconds to stop it :

- Switch on the ignition.

- Immediately press the interior pro-

tection switch 1.

- The siren stops and the alarm is

disarmed.

The alarm will be set the next time

the vehicle is locked.

Press the unlocking button on the

remote control key.

The doors unlock and the courtesy

lights come on.

The direction indicators flash for two

seconds.

The red lamp on the switch goes out.

DO NOT MAKE ANY MODIFICATIONS

TO THE ALARM SYSTEM.

Downloaded from www.Manualslib.com manuals search engine

MAINTENANCE & CARE for Your Peugeot 306 4 Door First Generation (1993-2002)

Related Topics