Get Comfort Guide for Peugeot 307 4 Door 2001-2014

Example: setting the duration of the

"follow-me-home" lighting

The RT4 GPS audio/tele-

phone must reinitialise and

restart in order to change

the voice used by the voice

synthesiser (male or female)

or the language used by the

system.

Turn the dial to select the "Light-

ing conﬁguration" menu, then

press it to conﬁrm.

For safety reasons, it is im-

perative that conﬁguration of

the multifunction displays by

the driver takes place when

stationary.

"Video" menu

You can connect video equipment

(camcorder, digital camera, DVD

player, ...) to the three audio/video

sockets, located in the glove box.

Videos can only be displayed

when stationary.

Select the line "Duration of the

"follow-me-home" lighting" then

conﬁrm.

Once this menu has been selected,

you can select:

- "Activate video mode" to activate/

deactivate the video,

- "Video parameters" to set the dis-

play format, the brightness, the

contrast and the colours.

Press the "MODE"

"DARK"

button to disconnect the display-

ing of the video.

Press the "SOURCE" button sev-

eral times in succession to select

an audio source other than that of

the video.

Select the duration then press the

dial.

Turn the dial to set the value re-

quired (15, 30 or 60 seconds),

then press the dial.

Select the "OK" box, then con-

ﬁrm.

40

Advice on operation

If, when the vehicle has been

parked in the sun for a long time,

the interior temperature remains

very high, do not hesitate to ven-

tilate the passenger compartment

for a few minutes.

Place the air ﬂow control at a level

sufﬁcient to ensure a good renewal

of air in the passenger compartment.

When the air ﬂow control is in posi-

tion 0 (deactivation of the system),

temperature related comfort is no

longer guaranteed but a slight ﬂow

of air, due to the movement of the

vehicle, can still be felt.

For even air distribution, take care

not to obstruct the exterior air in-

take grille at the base of the wind-

screen, the vents, the air outlets

under the front seats and the air

extractor located behind the ﬂaps

in the boot.

Check that the passenger com-

partment ﬁlter is in good condi-

tion. Have the ﬁlters replaced

regularly. If you drive in a dusty

environment, change them twice

as often.

VENTILATION

1. Windscreen de-icing or demist-

ing vents.

2. Front window de-icing or de-

misting vents.

3. Side vents.

4. Centre vents.

5. Air outlet to front footwells.

6. Air outlet to rear footwells.

Switch off the rear screen

and exterior mirrors demisting

as soon as you consider this

necessary as reducing the

current consumption reduces

the fuel consumption.

41

3. Air distribution adjustment

HEATING/VENTILATION

Windscreen and side

windows.

Windscreen, side windows

and footwells.

Footwells.

(vents closed).

Centre and side vents.

The heating and ventilation only op-

erate when the engine is running.

The air distribution can be adjusted

by placing the control in an interme-

diate position, marked

"



"

1. Temperature adjustment

2. Air ﬂow adjustment

Turn the control from posi-

Turn the control from blue

(cold) to red (warm) to ad-

just the temperature to your

requirements.

tion 1 to position 4 to obtain

an air ﬂow sufﬁcient to en-

sure your comfort.

42

4. Air intake/Air recirculation

5. Demisting the rear screen and

exterior mirrors

Rapid demisting of the

windscreen

To quickly de-ice or demist the wind-

screen and side windows:

- place the air distribution control in

the "windscreen and side windows"

position,

- place air intake control button 4 in

the "Outside Air Intake" position,

(button 4 indicator light off),

- place the temperature 1 and air ﬂow

2 controls at maximum, as indicated

by the "Windscreen and side win-

dows" symbol on the control panel,

- close the centre vents.

The recirculation of interior air ena-

bles you to isolate the passenger

compartment from exterior odours

and smoke.

The outside air intake enables you to

prevent and eliminate the condensation

on the windscreen and side windows.

When the air recirculation is used

in a humid climate, there is a risk of

misting of the windows.

Pressing the button once

demists the rear screen

and the exterior mirrors.

This switches off automati-

cally to prevent an exces-

sive consumption of current.

Pressing again reactivates demisting.

It is possible to stop demisting be-

fore it is switched off automatically by

pressing the button again.

Pressing button 4 permits

recirculation of the interior

air. This is indicated by il-

lumination of the indicator

light. As soon as possible,

press button 4 again to permit the

intake of outside air to prevent dete-

rioration of the air quality and avoid

misting of the windows. This is indi-

cated by the switching off of the indi-

cator light.

43

4. Air distribution adjustment

AIR CONDITIONING

Windscreen and side

windows.

Windscreen, side windows

and footwells.

Footwells

(vents closed).

Centre and side vents.

The air conditioning only operates

when the engine is running.

The air distribution can be adjusted

by placing the control in an interme-

diate position, marked

"



"

1. Air conditioning On/Off

2. Temperature adjustment

Turn the control from blue

(cold) to red (warm) to ad-

just the temperature to your

requirements.

The air conditioning is de-

signed to operate effectively

in all seasons, with the win-

dows closed. In summer, it

enables the temperature to

be lowered and in winter, above 0 °C,

it increases the effectiveness of the

demisting.

3. Air ﬂow adjustment

Press the switch, the indicator light

Turn the control from posi-

tion 1 to position 4 to obtain

an air ﬂow sufﬁcient to en-

sure your comfort.

The air conditioning does not op-

erate while the air ﬂow adjustment

control 3 is in position "0"

44

5. Air intake/Air recirculation

6. Demisting the rear screen and

the mirrors

In certain cases of particu-

larly arduous use (towing the

maximum load on a steep

The interior air recirculation enables

you to isolate the passenger com-

partment from exterior odours and

smoke.

The outside air intake enables you to

prevent and eliminate misting of the

windscreen and side windows.

Used simultaneously with the air con-

ditioning, air recirculation enables

performance to be improved.

Used in a humid climate, air recir-

culation may result in misting of the

windows.

Pressing the button once

demists the rear screen

and the exterior mirrors.

This switches off automati-

cally to prevent an exces-

gradient in high tempera-

tures), switching off the air condition-

ing permits the recovery of engine

power and therefore an increase in

the towing capacity.

In order for the air conditioning to be

fully effective, the windows must be

closed.

The air conditioning system does not

contain chlorine and does not present

any danger to the ozone layer.

Operate the air conditioning system

for 5 to 10 minutes, once or twice a

month, to keep it in perfect working

order.

sive consumption of current.

Pressing again reactivates demisting.

It is possible to stop demisting be-

fore it is switched off automatically by

pressing the button again.

Pressing button 5 permits

recirculation of the interior

air. This is indicated by il-

lumination of the indicator

light.

Rapid demisting of the

windscreen

To quickly de-ice or demist the wind-

screen and side windows:

- place the air distribution control in

the "windscreen and side windows"

position,

- place the temperature 2 and air

ﬂow 3 controls at maximum, as

indicated by the "Windscreen and

side windows" symbol on the con-

trol panel,

The water produced by the air con-

ditioning condensation is discharged

through an opening provided for this

purpose. Therefore, a puddle of wa-

ter may form underneath the vehicle

when stationary.

In order to ensure that the air con-

ditioning system operates correctly,

regular checks are also recommended.

As soon as possible, press button

5 again to permit the intake of out-

side air, to prevent deterioration of

the air quality and to avoid misting of

the windows. This is indicated by the

switching off of the indicator light.

If the system does not produce cold air,

do not use it and contact a PEUGEOT

dealer.

- close the centre vents,

- switch air intake button 5 to the

"Outside Air Intake" position (but-

ton 5 indicator light off),

- start the air conditioning by pressing

button 1

45

For optimum comfort, you are ad-

vised to avoid a left/right setting dif-

ference of more than 3.

DUAL ZONE AUTOMATIC AIR CONDITIONING

For maximum cooling or heating of the

passenger compartment, it is possible

to go below the value 15 by turning until

"LO" is displayed or above the value

27 by turning until "HI" is displayed.

On entering the vehicle, if

the interior temperature is

much colder or warmer than

the comfort value, there is no

need to change the value displayed

in order to obtain the comfort re-

quired. The system corrects the dif-

ference in temperature automatically

and as quickly as possible.

The air conditioning only operates

when the engine is running.

Automatic operation

1. Automatic comfort

programme

When the engine is cold, to prevent

too great a distribution of cold air, the

air ﬂow will reach its optimum level

gradually.

4. Automatic visibility

programme

The automatic comfort pro-

gramme may not be suf-

ﬁcient to quickly demist or

de-ice the windscreen and

side windows (humidity,

several passengers, ice, etc.).

In this case, select the automatic vis-

ibility programme.

The system automatically controls

the air conditioning, the air ﬂow and

the air intake and provides optimum

distribution of the ventilation to the

windscreen and side windows.

2. Driver’s side adjustment

3. Passenger side adjustment

Press the "AUTO" button.

The "AUTO" symbol is dis-

played.

We recommend the use of

this mode: it permits auto-

The driver and his front

passenger can each adjust

the temperature to their re-

quirements.

The value indicated on the

display corresponds to a level of

comfort and not to a temperature in

degrees Celsius or Fahrenheit.

matic and optimised adjustment of

all of the functions, passenger com-

partment temperature, air ﬂow, air

distribution and air recirculation, in

accordance with the comfort value

that you have chosen. This system is

designed to operate effectively in all

seasons, with the windows closed.

Turn control 2

3 to the left or to

the right respectively to decrease or

increase this value.

To switch it off, press button 4 again

or press the "AUTO" button, the but-

ton’s indicator light switches off and

"AUTO" is displayed.

A setting around the value 21 provides

optimum comfort. However, depending

on your requirements, a setting between

18 and 24 is normal.

46

7. Air ﬂow adjustment

9. Demisting the rear screen and

the mirrors

Manual operation

If you wish, you can make a different

choice from that offered by the sys-

tem by changing a setting. The other

functions will still be controlled auto-

matically. Pressing the "AUTO" button

returns the system to completely auto-

matic operation.

Press this button to demist

the rear screen and the ex-

terior mirrors. The button 9

indicator light comes on.

Demisting switches off au-

tomatically to prevent an excessive

consumption of current. It is possible

to stop operation of the demisting be-

fore it is switched off automatically by

pressing the button again.

Press the "small fan" "large fan"

button respectively to decrease or in-

crease the ﬂow of air.

The air ﬂow symbol, the fan, ﬁlls pro-

gressively in relation to the value re-

quired.

5. Air conditioning On/Off

Press this button to stop air

cooling.

Avoid prolonged use of this

mode (risk of condensation,

odour, humidity).

8. Air intake/Air recirculation

10. Switching the system off

Press this button again as soon as

possible to return to automatic op-

eration of the air conditioning. The

symbol "A/C" is displayed.

Press the "small fan" button of the

air ﬂow 7 until the fan symbol disap-

pears.

This action switches off all of the func-

tions of the air conditioning system,

with the exception of the demisting of

the rear screen 9

Temperature related comfort is no

longer guaranteed but a slight ﬂow of

air, due to the movement of the vehi-

cle, can still be felt.

Pressing the "large fan" button of

the air ﬂow 7 again or the AUTO but-

ton reactivates the system with the

values set before it was switched off.

Press this button for recir-

culation of the interior air.

The air recirculation symbol

8 is displayed.

Air recirculation enables the

passenger compartment to be isolated

from exterior odours and smoke.

Avoid prolonged recirculation of inte-

rior air (risk of condensation and de-

terioration of the air quality).

As soon as possible, press this but-

ton again to permit the intake of out-

side air and prevent condensation.

6. Air distribution adjustment

Pressing this button sev-

eral times in succession

enables the air ﬂow to be

directed in turn towards:

- the windscreen and side windows

(de-icing or demisting),

- the windscreen, the side windows

and the footwells,

- the footwells,

- the centre vents, the side vents and

the footwells,

- the centre and side vents.

47

In certain cases of particu-

larly arduous use (towing the

maximum load on a steep

gradient in high tempera-

tures), switching off the air condition-

ing permits the recovery of engine

power and therefore an increase in

the towing capacity.

In order for the air conditioning to be

fully effective, the windows must be

closed.

The air conditioning system does not

contain chlorine and does not present

any danger to the ozone layer.

Operate the air conditioning for 5 to

10 minutes, once or twice a month, to

keep it in good working order.

The water produced by the air con-

ditioning condensation is discharged

through an opening provided for this

purpose. Therefore, a puddle of wa-

ter may form underneath the vehicle

when stationary.

In order to ensure that the air con-

ditioning system operates correctly,

regular checks are also recommended.

If the system does not produce

cold air, do not use it and contact a

PEUGEOT dealer.

48

Folding

- from inside:

MIRRORS

Manual exterior mirrors

with the ignition on, pull switch A

rearwards.

- from outside:

lock the vehicle using the remote

control or the key.

Note: if the mirrors are folded using

switch A, they will not unfold when

the vehicle is unlocked using the

remote control or the key. Switch A

must be pulled again.

Unfolding

- from inside:

with the ignition on, pull switch A

rearwards.

- from outside:

unlock the vehicle using the

remote control or the key.

Electric exterior mirrors

Adjustment

Move the lever in all four directions

to adjust.

When the vehicle is parked, the ex-

terior mirrors can be folded back

manually.

Slide switch A to the right or to the

left to select the corresponding

mirror.

Move knob B in all four directions

to adjust.

Return switch A to the centre

position.

The exterior mirror on the

driver’s side is convex (outer

edge deﬁned by a dotted

line) in order to eliminate the

"blind spot".

The folding and unfolding of

the exterior mirrors can be

deactivated by a PEUGEOT

dealer.

As a result, objects observed in the

driver’s and passenger’s mirrors are

in reality closer than they appear.

This must be taken into account to

correctly judge the distance of vehi-

cles approaching from behind.

49

Automatic day/night

interior mirror

Manual interior mirror

STEERING WHEEL HEIGHT

AND DEPTH ADJUSTMENT

The interior mirror has two positions:

- day (normal),

- night (anti-dazzle).

To change from one to the other,

push or pull the lever on the lower

edge of the mirror.

This automatically and gradually

changes between the day and night

positions. To prevent dazzling, the

glass of the mirror darkens auto-

matically depending on the intensity

of the light from behind. It clears as

the light (headlamps of following ve-

hicles, sunlight) decreases, ensuring

maximum visibility.

When the vehicle is stationary, unlock

the steering wheel by pulling handle A

Adjust the height and depth of the

steering wheel.

Lock it by pushing handle A down

fully.

Operation

Switch on the ignition and press

switch 1

- Indicator light 2 lit (switch pressed):

automatic operation.

- Indicator light 2 off: automatic sys-

tem off. The mirror remains at its

most clear.

Special feature

To ensure maximum visibility during

manoeuvres, the mirror clears auto-

matically when reverse gear is en-

gaged.

50

Automatic day/night

interior mirror

Manual interior mirror

STEERING WHEEL HEIGHT

AND DEPTH ADJUSTMENT

The interior mirror has two positions:

- day (normal),

- night (anti-dazzle).

To change from one to the other,

push or pull the lever on the lower

edge of the mirror.

This automatically and gradually

changes between the day and night

positions. To prevent dazzling, the

glass of the mirror darkens auto-

matically depending on the intensity

of the light from behind. It clears as

the light (headlamps of following ve-

hicles, sunlight) decreases, ensuring

maximum visibility.

When the vehicle is stationary, unlock

the steering wheel by pulling handle A

Adjust the height and depth of the

steering wheel.

Lock it by pushing handle A down

fully.

Operation

Switch on the ignition and press

switch 1

- Indicator light 2 lit (switch pressed):

automatic operation.

- Indicator light 2 off: automatic sys-

tem off. The mirror remains at its

most clear.

Special feature

To ensure maximum visibility during

manoeuvres, the mirror clears auto-

matically when reverse gear is en-

gaged.

50

FRONT SEATS

1. Forwards-backwards

adjustment

Lift the control and slide the seat

forwards or backwards.

2. Driver’s or passenger’s seat

height adjustment

Pull the handle upwards or push it

downwards as many times as neces-

sary to obtain the required position.

3. Seat back angle adjustment

Push the handle towards the rear.

4. Access to rear seats (3 door)

Pull the handle to fold the seat back

and move the seat forwards. On re-

positioning, the seat returns to its ini-

tial position.

Note: you can also use control 3

Then adjust the angle.

No person or object must

prevent the seat slide from

returning to its initial posi-

tion; a return to this position

is necessary for the seat to

lock in place.

51

6. Armrests

These can be folded down and are

removable.

To remove them, press the button lo-

cated between the armrest and the

side of the seat and pull it.

REAR HEAD RESTRAINTS

These have a high position for when

they are in use and a low position for

when they are stored.

The head restraints are removable.

To remove them, pull upwards as far

as the stop then press the lug.

7. Storage drawers

There is a storage drawer under each

front seat.

- To open it, lift it and pull.

- To take it out, open it to its full extent,

press the ends of the slides and lift

it, then remove it completely.

- To put it back in place, at the end

of its travel, press on the top of the

drawer to secure it.

5. Head restraint height and

angle adjustment

To raise the head restraint, pull it up-

wards.

Under the front passenger seat, the

layout of the ﬂoor allows for storage

of a ﬁrst aid kit and a warning triangle

(small version).

To remove the head restraint, press

the lug A and pull the head restraint

upwards.

To put the head restraint back in po-

sition, locate the stems of the head

restraint in the holes, taking care to

keep them in line with the seat back.

To lower the head restraint, press the

lug A and the head restraint.

The head restraint frame has a catch

which prevents it from lowering; this

safety device provides protection in

the event of an impact.

The adjustment is correct when

the upper edge of the head re-

straint is level with the top of the

head.

Never drive with the head

restraints removed; they

should be in place and

correctly adjusted.

Do not place heavy objects

in the drawers.

To tilt the head restraint, tilt the lower

part forwards or backwards.

52

REAR SEATS (SALOON)

To fold down the rear left seat (2/3 part)

or the right seat (1/3 part), always start

with the seat, never with the seat

back (risk of damage)

- move the front seat(s) forward if

necessary,

- lift the front of the seat cushion 1

- tilt the seat cushion 1 against the

front seat(s),

- check that the seat belt is correctly

positioned on the side of the seat

back,

When repositioning:

- pull control 2 forwards to unlock the

seat back 3

- place the head restraints in the low

position,

- fold down the seat back 3

Note: the seat cushion 1 can be

removed to increase the volume of

the load space.

- fold up the seat back and lock it

(the red marker of control 2 should

no longer be visible),

- fold up the seat.

Take care not to trap the seat belts

and to position the stalks correctly.

Squeeze the seat cushion ﬁxings to

detach them from their fastenings.

53

REAR SEATS (ESTATE)

Folding the seats:

Removing the seat cushion

(position against the front seats):

Take hold of the seat cushion 1 at the

bottom to remove it from its ﬁxings

and pull upwards.

To fold the rear left seat (2/3 section)

or the rear right seat (1/3 section), al-

ways start with the seat cushion,

never with the seat back (risk of

damage)

Reﬁtting the seat

cushion (position against the

front seats):

- ﬁt the seat cushion 1 in its ﬁxings,

- to lock it, press on the top of the

seat cushion 1

- move the front seat(s) forward if

necessary,

- pull the handle A located between

the seat cushion 1 and the seat

back 3 forwards, then pull it up-

wards to lift the seat cushion and

tilt it against the front seat(s),

- check that the seat belt is posi-

tioned correctly on the side of the

seat back,

- pull control 2 forwards to release

the seat back 3

- place the head restraints in the low

Putting the seats back in

position:

- fold the seat back and lock it (the

red indicator on control 2 should no

longer be visible),

position,

- tilt the seat back 3

Note: the seat cushion 1 can be re-

moved to increase the volume of the

load space.

- fold the seat cushion.

Take care not to trap the seat belts

and to position the stalks correctly.

54

GENERAL POINTS RELATING

TO CHILD SEATS

INSTALLING A CHILD SEAT

USING A THREE POINT SEAT

BELT

Although one of PEUGEOT’s main

criteria when designing your vehicle,

the safety of your children also de-

pends on you.

For maximum safety, please follow

these precautions:

- in accordance with Directive 2003/

20, all children under the age of

12 or less than one metre ﬁfty

tall must travel in approved child

seats suited to their weight, on

seats ﬁtted with a seat belt or ISO-

FIX mountings*.

"Rearwards-facing"

"Forwards-facing"

When a "rearwards-facing" child seat

is installed on the front passenger

seat, it is essential that the passen-

ger air bag** is disarmed. Otherwise,

the child would risk being seri-

ously injured or killed if the air bag

were to inﬂate

When a "forwards-facing" child seat

is installed on the front passenger

seat, adjust the vehicle’s seat to the

intermediate longitudinal position

with the seat back upright and leave

the passenger air bag armed**.

statistically, the safest seats in

your vehicle for the transpor-

tation of children are the rear

seats,

a child weighing less than 9 kg

must travel in the "rearwards-

facing" position both in the front

and in the rear.

PEUGEOT recommends that chil-

dren should travel in the rear seats

of your vehicle:

"rearwards-facing" up to the age

of 2,

"forwards-facing" over the age

of 2.

* The rules for transporting children

are speciﬁc to each country. Con-

sult the current legislation in your

country.

Intermediate longitudinal

position

** According to model.

55

CHILD SEATS RECOMMENDED BY PEUGEOT

PEUGEOT offers a complete range of recommended child seats which are

secured using a three point seat belt

Group 0: from birth to 10 kg

Group 0+: from birth to 13 kg

L1

"BRITAX

L2

"ROMER

Babysure"

(E11 0344117)

Installed in

the rear-facing

position.

Baby-Safe Plus"

(E1 03301146)

Installed in

the rear-facing

position.

Groups 1, 2 and 3: from 9 to 36 kg

L3

"KIDDY Life"

(E1 03301135)

Passenger air bag OFF**

For the safety of young children

(from 9 to 18 kg), PEUGEOT

recommends use of the

restraining cushion.

Groups 2 and 3: from 15 to 36 kg

L5

"KLIPPAN Optima"

(E17 030007)

From the age of

6 years (approximately

22 kg), the booster is

used on its own.

L4

"RECARO Start"

(E1 03301108).

** According to version.

56

CHILD SEATS RECOMMENDED BY PEUGEOT

PEUGEOT offers a complete range of recommended child seats which are

secured using a three point seat belt

Group 0: from birth to 10 kg

Group 0+: from birth to 13 kg

L1

"BRITAX

L2

"ROMER

Babysure"

(E11 0344117)

Installed in

the rear-facing

position.

Baby-Safe Plus"

(E1 03301146)

Installed in

the rear-facing

position.

Groups 1, 2 and 3: from 9 to 36 kg

L3

"KIDDY Life"

(E1 03301135)

Passenger air bag OFF**

For the safety of young children

(from 9 to 18 kg), PEUGEOT

recommends use of the

restraining cushion.

Groups 2 and 3: from 15 to 36 kg

L5

"KLIPPAN Optima"

(E17 030007)

From the age of

6 years (approximately

22 kg), the booster is

used on its own.

L4

"RECARO Start"

(E1 03301108).

** According to version.

56

LOCATION OF CHILD SEATS SECURED USING THE SEAT BELT

In accordance with the European regulation (Directive 2000/3), this table indicates the options for the installation of child seats

secured using the seat belt and universally approved (a) depending on the weight of the child and the seat in the vehicle:

Weight of the child/indicative age

9 to 18 kg

(group 1)

1 to 3 years approx 3 to 6 years approx 6 to 10 years approx

15 to 25 kg

(group 2)

22 to 36 kg

(group 3)

Below 13 kg

(groups 0 (b) and 0+)

Up to 1 year approx

Seat

Front passenger

seat (c)

ﬁxed

height adjustable (R)

U

U (R)

U

U (R)

U

U (R)

U

U (R)

Rear side seats

Rear centre seat

U

(a) Universal child seat: child seat which can be installed in all vehicles using the seat belt.

(b) Group 0: from birth to 10 kg.

(c) Consult the current legislation in your country before installing your child on this seat.

U: seat suitable for the installation of a child seat secured using the seat belt and universally approved, "rear facing" and/or

"forwards facing".

U (R): identical to U, but the vehicle seat must be adjusted to the highest position.

57

Comfort for Your Peugeot 307 4 Door 2001-2014

Related Topics

Popular Owner Manuals

Latest Owner Manuals