Multifunction Displays -> Monochrome Display A for Your Peugeot 307 4 Door 2001-2014

Display settings  
Languages  
Once the "Display settings" menu  
has been selected, you can gain ac-  
cess to the following settings:  
- year,  
- month,  
- day,  
- hour,  
Once the "Languages" menu has  
been selected, you can change  
the language used by the display  
(Français, Italiano, Nederlands, Por-  
tugues, Portugues-Brasil, Deutsch,  
English, Espanol).  
Vehicle configuration  
Once the "Vehicle configuration"  
menu has been selected, you can  
activate or deactivate the following  
equipment:  
- minutes,  
- 12 or 24 hour mode.  
- wiper linked with reverse gear (re-  
fer to the "Visibility" section),  
- "follow-me-home" lighting (refer to  
the "Visibility" section),  
- parking assistance (refer to the  
"Driving" section).  
Units  
Once the "Units" menu has been se-  
lected, you can change the units of  
the following parameters:  
- temperature (°C or °F),  
- fuel consumption (l/100, mpg or  
km/l).  
Once you have selected a setting,  
press the "OK" button to change its  
value.  
Options  
Once the "Options" menu has been  
selected, you can start diagnostics of  
the status of the equipment (active,  
not active, faulty).  
Wait for approximately ten sec-  
onds without any action to allow the  
changed data to be recorded or press  
the "ESC" button to cancel.  
The display then returns to the nor-  
mal display.  
For safety reasons, configu-  
ration of the multifunction  
displays by the driver must  
take place when stationary.  
31  
MONOCHROME DISPLAY A  
Vehicle configuration  
General menu  
Press the "MENU" button to gain ac-  
Once the "Vehicle configuration"  
menu has been selected, you can  
activate or deactivate the following  
equipment:  
cess to the general menu, then press  
"
buttons to scroll  
the
"  
"
"
through the following items:  
- rear wiper linked with reverse gear  
(refer to the "Visibility" section),  
- "follow-me-home" lighting (refer to  
the "Visibility" section),  
- parking assistance (refer to the  
"Driving" section).  
- radio-CD,  
- vehicle configuration,  
- options,  
- display settings,  
- languages,  
- units.  
Presentation  
Press the "OK" button to select the  
menu required.  
This displays the following informa-  
tion, via the RD4 audio equipment  
control keypad:  
- the time,  
- the date,  
- the outside temperature* (this  
flashes if there is a risk of ice),  
- the audio source displays (radio,  
CD, ...),  
- the status of the accesses (doors,  
boot, ...),  
- the warning messages (e.g.: "Emis-  
sion control system faulty") or infor-  
mation messages (e.g.: "Auto lights  
on"), displayed temporarily, can be  
cleared by pressing the "ESC" but-  
ton,  
Options  
Radio-CD  
Once the "Options" menu has been  
selected, you can start diagnostics of  
the status of the equipment (active,  
not active, faulty).  
With the RD4 audio equipment  
switched on, once the "Radio-CD"  
menu has been selected, you can  
activate or deactivate the functions  
linked with the use of the radio (RDS  
following, REG mode), the CD or the  
CD changer (introscan, random play,  
CD repeat).  
For further details concerning the  
"Radio-CD" application, refer to the  
RD4 part of the "Audio and Telema-  
tics" section.  
- the trip computer (see correspond-  
ing section).  
* With air conditioning only.  
32