ACCESS
ELECTRIC WINDOWS
Oneꢀtouch electric windows
!
After approximately ten consecu-
tive complete opening/closing
movements of the window, a pro-
tection function is activated which
only authorises closing of the win-
dow to prevent damage to the elec-
tric window motor.
System intended to open or close a win- There are two options:
dow manually or automatically. Fitted
-
manual mode
with a safety auto-reverse system and
a system for deactivation in the event of
misuse of the rear controls.
Press or pull the control gently.
The window stops when the
control is released.
Once the window is closed, the con-
trols will become available again
after approximately 40 minutes.
-
automatic mode
Press or pull the control firmly.
The window opens or closes fully
when the control is released.
Pressing the control again stops
the movement of the window.
Safety autoꢀreverse
When the window rises and meets an
obstacle, it stops and partially lowers
again.
i
If the window cannot be closed (for
1. Driver’s electric window control.
2. Passenger’s electric window control.
3. Rear right electric window control.
4. Rear left electric window control.
5. Deactivation of the rear electric
window and door controls.
example, in the presence of ice),
immediately after the movement is
reversed:
press and hold the control until
the window opens fully,
thenpullthecontrolimmediately
and hold it until the window
closes,
continue to hold the control for
approximately one second after
the window has closed.
The safety autoꢀreverse function
is not operational during these
operations.
The electric window controls re-
main operational for approximate-
ly 45 seconds after the ignition is
switched off or until the vehicle is
locked after a door is opened.
If one of the passenger windows
cannot be operated from the driv-
er’s door control pad, carry out the
operation from the control pad of
the passenger door concerned,
and vice versa.
i
82
English 