Get COMFORT Guide for Peugeot 308 4 Door First Genration (2007-2013)

COMFORT

The air distribution control enables you

to diffuse the air in the passenger com-

partment combining several air vents.

The air ﬂow control enables you to in-

crease or reduce the speed of the ven-

tilation blower.

Control panel

The controls of this system are grouped

together on control panel A on the cen-

tre console. Depending on the model,

the functions offered are:

-

the level of comfort required,

the air ﬂow,

the air distribution,

the de-icing and demisting,

the manual or automatic air condi-

tioning controls.

Air diffusion

1. Windscreen de-icing or demisting

vents.

2. Front side window de-icing or

demisting vents.

3. Side adjustable and closing vents.

4. Central adjustable and closing

vents.

5. Air outlets to the front footwells.

VENTILATION

Air treatment

System which creates and maintains The incoming air follows various routes

comfortable conditions in the vehicle’s depending on the controls selected by

passenger compartment.

the driver:

-

direct arrival in the passenger

compartment (air intake),

passage through a heating circuit

(heating),

passage through a cooling circuit

(air conditioning).

Air intake

6. Adjustable and closing vents for the

rear passengers.

7. Air outlets to the rear footwells.

The air circulating in the passenger com-

partment is ﬁltered and originates either

from the outside via the grille located at

the base of the windscreen or from the

inside in air recirculation mode.

The temperature control enables you to

obtain the level of comfort required by

mixing the air of the various circuits.

52

COMFORT

i

The air conditioning system does

not contain chlorine and does not

present any danger to the ozone

layer.

In order for these systems to be fully effective, follow the operation and main-

tenance rules below:

 If the interior temperature remains very high after the vehicle has been

parked in the sun for a considerable time, do not hesitate to ventilate the

passenger compartment for a few minutes.

Place the air ﬂow control at a sufﬁcient level to provide an adequate

renewal of air in the passenger compartment.

 To obtain an even air distribution, take care not to obstruct the exterior air

intake grilles located at the base of the windscreen, the nozzles, the vents

and the air outlets, as well as the air extractor located in the boot.

 Do not cover the sunshine sensor, located on the fascia; this is used for

regulation of the air conditioning system.

 Operate the air conditioning system for 5 to 10 minutes, once or twice a

month to keep it in perfect working order.

 Ensure that the passenger compartment ﬁlter is in good condition and

have the ﬁlter elements replaced regularly (refer to the "Checks" section).

We recommend the use of a combined passenger compartment ﬁlter.

Thanks to its second special active ﬁlter, it contributes to the puriﬁcation

of the air breathed by the occupants and the cleanness of the passenger

compartment (reduction of allergic symptoms, bad odours and greasy

deposits).

 To guarantee correct operation of the air conditioning system, you are also

advised to have it checked regularly.

 If the system does not produce cold air, do not use it and contact a

PEUGEOT dealer.

When towing the maximum load on a steep gradient in high temperatures,

switching off the air conditioning permits the recovery of engine power and

therefore improvement of the towing capacity.

The condensation created by the air conditioning results in a discharge of

water under the vehicle which is perfectly normal.

53

COMFORT

1. Temperature adjustment

 Turn the dial from blue

Footwells.

(vents closed)

HEATING/VENTILATION

(cold) to red (hot) to adjust

the temperature to your

requirements.

Central and side vents.

2. Air ﬂow adjustment

The air distribution can be

adapted by placing the dial in

an intermediate position.

 Turn the dial from position

1 to position 5 to obtain a

comfortable air ﬂow.

4. Air intake/Air recirculation

The intake of exterior air prevents misting

of the windscreen and side windows.

The recirculation of interior air insulates

the passenger compartment from exte-

rior odours and smoke.

Return to exterior air intake as soon as

possible to prevent deterioration of the

the air quality and avoid misting.

MANUAL AIR CONDITIONING



If you place the air ﬂow control

in position 0 (deactivation of the

system), the temperature is no

longermaintainedatacomfortable

level. However, a slight ﬂow of

air, due to the movement of the

vehicle, can still be felt.

i

3. Air distribution adjustment

Windscreen and side windows.

 Pressthebuttontorecirculate

the interior air. The indicator

light comes on to conﬁrm

this.

The heating/ventilation or air condition-

ing systems can only operate with the

engine running.

Windscreen, side windows and

footwells.

 Press the button again to permit the

intake of exterior air. The indicator

light switches off to conﬁrm this.

54

COMFORT

Deꢀicing ꢀ Demisting

REAR SCREEN DEꢀICING

 Switch off the de-icing of the

rear screen and exterior mirrors

as soon as you consider this

necessary as lower current

consumption results in reduced

fuel consumption.

To quickly de-ice or demist the wind-

screen and side windows:

 place the air intake control 4 in the

The control button is located on

the heating or air conditioning

system control panel.

"Exterior air intake" position,

 place the air distribution dial 3 in the

"Windscreen position",

 place the temperature 1 and air ﬂow

2 dials at maximum,

 close the central vents,

Switching on

The rear screen de-icing can only operate

when the engine is running.

 Press this button to de-ice the rear

screen and the exterior mirrors. The

indicator light associated with the

button comes on.

 above 0 °C, switch on the air

conditioning by pressing the "A/C"

button.

Switching off

5. Air conditioning On/Off

The de-icing switches off automatically

to prevent an excessive consumption of

current.

 It is possible to stop the de-icing

operation before it is switched off

automatically by pressing the button

again. The indicator light associated

with the button switches off.

The air conditioning is de-

signed to operate effectively in

all seasons, with the windows

closed.

It enables you to:

-

lower the temperature, in summer,

increase the effectiveness of the

demisting in winter, above 0 °C.

Switching on

 Press the "A/C" button, the

associated indicator light comes on.

The air conditioning does not opꢀ

erate when the air ﬂow adjustment

control 2 is in position "0".

If the engine is switched off before

i

the de-icing is switched off auto-

matically, de-icing will resume next

time the engine is switched on.

Switching off



Press the "A/C" button again, the

associated indicator light switches off.

55

COMFORT

Deꢀicing ꢀ Demisting

REAR SCREEN DEꢀICING

 Switch off the de-icing of the

rear screen and exterior mirrors

as soon as you consider this

necessary as lower current

consumption results in reduced

fuel consumption.

To quickly de-ice or demist the wind-

screen and side windows:

 place the air intake control 4 in the

The control button is located on

the heating or air conditioning

system control panel.

"Exterior air intake" position,

 place the air distribution dial 3 in the

"Windscreen position",

 place the temperature 1 and air ﬂow

2 dials at maximum,

 close the central vents,

Switching on

The rear screen de-icing can only operate

when the engine is running.

 Press this button to de-ice the rear

screen and the exterior mirrors. The

indicator light associated with the

button comes on.

 above 0 °C, switch on the air

conditioning by pressing the "A/C"

button.

Switching off

5. Air conditioning On/Off

The de-icing switches off automatically

to prevent an excessive consumption of

current.

 It is possible to stop the de-icing

operation before it is switched off

automatically by pressing the button

again. The indicator light associated

with the button switches off.

The air conditioning is de-

signed to operate effectively in

all seasons, with the windows

closed.

It enables you to:

-

lower the temperature, in summer,

increase the effectiveness of the

demisting in winter, above 0 °C.

Switching on

 Press the "A/C" button, the

associated indicator light comes on.

The air conditioning does not opꢀ

erate when the air ﬂow adjustment

control 2 is in position "0".

If the engine is switched off before

i

the de-icing is switched off auto-

matically, de-icing will resume next

time the engine is switched on.

Switching off



Press the "A/C" button again, the

associated indicator light switches off.

55

COMFORT

DUAL ZONE AUTOMATIC AIR

CONDITIONING

When the engine is cold, to prevent

too great a distribution of cold air,

the air ﬂow will reach its optimum

level gradually.

In cold weather, it favours the dis-

tribution of warm air to the wind-

screen, side windows and footwells

only.

On entering the vehicle, if the in-

terior temperature is much colder

or warmer than the comfort value,

there is no need to change the val-

ue displayed in order to obtain the

comfort required. The system cor-

rects the difference in temperature

automatically and as quickly as

possible.

i

2. Driver’s side adjustment

3. Passenger side adjustment

4. Automatic visibility programme

The driver and his front pas-

The automatic comfort pro-

gramme may not be sufﬁcient

to quickly demist or de-ice the

windscreen and side windows

(humidity, several passen-

gers, ice, etc.).

senger can each adjust the

temperature to their require-

ments.

The air conditioning only operates when

the engine is running.

The value indicated on the display cor-

responds to a level of comfort and not

to a temperature in degrees Celsius or

Fahrenheit.

Automatic operation

 In this case, select the automatic

visibility programme.

1. Automatic comfort programme

The system automatically controls the

air conditioning, the air ﬂow and the air

intake and provides optimum distribu-

tion of the ventilation to the windscreen

and side windows.

 Turn control 2 or 3 to the left or to

the right respectively to decrease or

increase this value.

A setting around the value 21 provides

optimum comfort. However, depending

 Press the "AUTO" button.

The indicator light on the

button comes on.

We recommend the use of this mode: on your requirements, a setting between

it permits automatic and optimised ad- 18 and 24 is normal.

justment of all of the functions, passen-

ger compartment temperature, air ﬂow,

air distribution and air recirculation, in

accordance with the comfort value that

you have chosen.

 To switch it off, press the "visibility"

button again or press the "AUTO"

button, the indicator light on the button

switches off and the indicator light on

the "AUTO" button comes on.

You are advised to avoid a left/right set-

ting difference of more than 3.

This system is designed to operate ef-

fectively in all seasons, with the windows

closed.

56

COMFORT

6. Air distribution adjustment



As soon as possible, press this button

again to permit the intake of outside air

andpreventcondensation.Theindicator

light on the button switches off.

Manual operation

If you wish, you can make a different

choice from that offered by the system

by changing a setting. The other func-

tions will still be controlled automatically.

 Press one or more buttons to

direct the air ﬂow towards:

 Pressing the "AUTO" button returns

the system to completely automatic

operation.

-

the windscreen and side windows

(de-icing or demisting),

the windscreen, the side windows

and the vents,

the windscreen, the side windows,

the vents and the footwells,

the vents,

the footwells,

!

Avoid prolonged recirculation of in-

terior air (risk of condensation and

deterioration of the air quality).

For maximum cooling or heating

9. Mono zone/Dual zone

 Pressthisbuttontoequalise

i

-

of the passenger compartment, it

is possible to exceed the minimum

value 14 or the maximum value 28.

the comfort value on the

passenger side with that

on the driver’s side (mono

zone). The indicator light on

the button comes on.

 Turn control 2 or 3 to the left

until "LO" is displayed or to the

right until "HI" is displayed.

the windscreen, the side windows

and the footwells.

7. Air ﬂow adjustment

Switching the system off

 Turn this control to the left

5. Air conditioning On/Off

to decrease the air ﬂow or

to the right to increase the

air ﬂow.

 Turn the air ﬂow control to the left until

all of the indicator lights switch off.

This action switches off all of the func-

tions of the system.

Temperature related comfort is no long-

er guaranteed but a slight ﬂow of air,

due to the movement of the vehicle, can

still be felt.

 Turn the air ﬂow dial to the right

or press the "AUTO" button to

reactivate the system with the values

set before it was switched off.

 Press this button to switch

off the air conditioning.

The air ﬂow indicator lights, between

the two fans, come on progressively in

relation to the value requested.

Switching the system off could result in

discomfort (humidity, condensation).

 Press this button again to return

to automatic operation of the air

conditioning. The indicator light on

the "A/C" button comes on.

8. Air intake/Air recirculation

 Press this button for

recirculation of the interior

air. The indicator light on

the button comes on.

Avoid driving for prolonged periods

with the system off.

Air recirculation enables the passenger

compartment to be isolated from exte-

rior odours and smoke.

!

57

COMFORT

Removing the cartridge

 Turn the dial a quarter of a turn fully

to the left.

 Remove the cartridge from the

fascia.

 Reﬁt its sealing case.

Fragrance cartridge

System permitting the diffusion of a fra- This cartridge can be removed easily.

grance in the passenger compartment

You can change it at any time and store

in accordance with your requirements,

it in the sealed case which keeps it

by means of the adjustment dial and the

closed once it has been opened.

You can obtain different fragrance car-

various fragrance cartridges available.

tridges from PEUGEOT dealers.

Do not discard the original cartridge

as this serves as a closer when no

fragrance cartridge is in use.

i

In order to preserve the service life

of the cartridge, turn the dial to the

left when you no longer wish to dif-

fuse the fragrance in the passenger

compartment.

Adjustment dial

Fitting the cartridge

 Remove the cartridge from the

sealing case.

 Install the cartridge in the fascia

(ﬂower at top right).

 Press the dial and turn it a quarter of

a turn to the right.

This dial permits adjustment of the in-

tensity of diffusion of the fragrance.

 Turn the dial to the right to permit

diffusion of the fragrance (horizontal

position).

!

As a safety precaution, do not car-

ry out any action on the cartridge

while driving.

 Turn the dial to the left to stop

diffusion of the fragrance (vertical

position).

Do not dismantle the cartridges.

Do not attempt to reﬁll the fragrance

diffuser or the cartridges. Use origi-

nal PEUGEOT cartridges only.

Avoid all contact with the skin and

eyes.

Keep out of reach of children and

animals.

i

Leave the central vents open.

The intensity of diffusion of the fra-

grance may depend on the ventila-

tion or air conditioning settings.

58

COMFORT

FRONT SEATS

Seat consisting of a seat cushion, a seat

back and a head restraint which can all

be adjusted to adapt your position for

ease of driving and comfort.

Manual adjustments

Forwardsꢀbackwards adjustment

 Raise the control and slide the seat

forwards or backwards.

Driver’s or passenger’s seat height

adjustment

 Pull the control upwards to raise

or push it downwards to lower, as

many times as necessary, to obtain

the position required.

Seat back angle adjustment

 Push the control rearwards.

59

COMFORT

FRONT SEATS

The electrical functions of the driv-

er’s seat are deactivated approxi-

mately one minute after the ignition

is switched off.

To reactivate them, switch on the

ignition.

i

Seat consisting of a seat cushion, a seat

back and a head restraint which can all

be adjusted to adapt your position for

ease of driving and comfort.

Driver’s seat electric

adjustments

Forwardsꢀbackwards adjustment

 Push the control forwards or

rearwards to slide the seat.

Seat cushion height and angle

adjustment

 Tilt the rear part of the control

upwards or downwards to obtain the

required height.

Seat back angle adjustment

 Tilt the control forwards or rearwards

to adjust the angle of the seat back.

 Tilt the front part of the control

upwards or downwards to obtain the

required angle.

60

COMFORT

Additional adjustments

Access to the rear seats (3ꢀdoor)

Head restraint height and angle

adjustment

 Pull the control upwards to fold

the seat back and move the seat

forward.

!

The head restraint is ﬁtted with a

frame with notches which prevents

it from lowering; this is a safety de-

vice in case of impact.

The adjustment is correct when

the upper edge of the head reꢀ

straint is level with the top of the

head.

 To raise the head restraint, pull it

forwards and upwards at the same

time.

 To remove the head restraint, press

the lug A and pull the head restraint

upwards.

When put back in place, the seat

returns to its initial position.

 To put the head restraint back in

place, engage the head restraint

stems in the openings keeping them

in line with the seat back.

Never drive with the head restraints

removed; they must be in place and

adjusted correctly.

 To lower the head restraint, press

the lug A and the head restraint at

the same time.

 To adjust the angle of the head

restraint, tilt its lower part forwards

or rearwards.

Lumbar adjustment

 Turn the dial to obtain the correct

lumbar position.

 Lower the support B incorporated in

the control to rest the seat belt on

it. It enables you to retrieve the seat

belt more easily when you need to

put it back on.

No person or object should prevent

!

the seat slide from returning to its

initial position; the return to this po-

sition is necessary for longitudinal

locking.

61

COMFORT

Table position of the front

passenger seat

Placingthisseat inthetableposition, with

the rear seats also in the table position,

allows you to transport long objects.

 Pull the control upwards to fold the

seat back onto the seat cushion.

Do not forget to fold the "aircraft"

type table ﬁxed on the back of the

seat ﬁrst.

i

To lower the seat back fully, tilt the

seat back angle adjustment control.

 Pull the control again to release the

seat back and raise it.

When put back in place, the seat

back returns to its initial position.

62

COMFORT

Using the remote control keys Vehicle moving

When the vehicle is locked, the remote  Press and hold button 1 or 2 until

Storing driving positions

System which takes into account the

electrical settings of the driver’s seat

and exterior mirrors. It enables you to

store up to two positions using the but-

tons on the side of the driver’s seat and

two further driving positions using the

two remote control keys.

control key stores the position of the

driver’s seat and exterior mirrors.

the audible signal is heard indicating

the end of the adjustment.

Each remote control key can store one

speciﬁc setting.

Storing a new position cancels the

previous position.

When the ignition is off, after a few

consecutive position recalls, the

function will be deactivated until

the engine is started, to prevent

discharging of the battery.

i

!

Recalling a stored position

When the vehicle is unlocked, the driv-

er’s seat and the exterior mirrors return

to the position stored by the remote

control key.

Storing a position

Ignition on

 Brieﬂy press button 1 or 2 to recall

Using buttons M/1/2

 Switch on the ignition.

 Adjust your seat and your exterior

mirrors.

the corresponding position.

An audible signal is heard indicating

the end of the adjustment.

 Press button M, then press button 1

or 2 within four seconds.

An audible signal is heard indicating

that the storing has been taken into

account.

63

COMFORT

Removing the seat cushion

REAR SEATS

 Move the corresponding front seat

forwards if necessary.

 Pull the handle 1 forwards to raise

the seat cushion 2.

 Tilt the seat cushion 2 fully against

Bench seat the left-hand (2/3) or right-

hand (1/3) section of which can be folded

to adapt the boot load space.

the front seat.

 Remove the seat cushion 2 from its

ﬁxings by pulling upwards.

Rear head restraints

These have a high position (comfort

and safety) and a low position (rear visi-

bility).

Refitting the seat cushion

 Position the seat cushion 2 vertically

in its ﬁxings.

 Fold down the seat cushion 2.

 Press on the seat cushion to secure it.

They can also be removed.

To remove a head restraint:

 pull the head restraint fully forwards

and upwards at the same time,

 then, press the lug A.

Never drive with the head restraints

!

removed; they must be in place

and in the high position when pas-

sengers are seated in the rear.

64

COMFORT

Folding the seat

In order to fold a rear seat without any

risk of damage, always start with the

seat cushion, never with the seat

back:

 move the corresponding front seat

forwards if necessary,

 pull the handle 1 forwards to raise

the seat cushion 2,

 tilt the seat cushion 2 fully against

the front seat,

 check that the seat belt is positioned

correctly on the side of the seat back,

 lower or remove the head restraints

if necessary,

 pull the control 3 forwards to release

the seat back 4,

 tilt the seat back 4.

i

The seat cushion 2 can be removed

to increase the loading volume.

Returning the seat back to its

original position

When returning the rear seat back to its

original position:

 put the seat back 4 in the upright

position and secure it,

When returning the rear seat back

to its original position, take care not

to trap the seat belts and ensure

that their buckles are positioned

correctly.

!

 fold the seat cushion 2,

 reﬁt the head restraints or put them

back in place.

65

COMFORT

REAR SEATS

During the forwards-backwards and

seat back angle adjustment opera-

tions, take care not to apply any force

to the load space screen roller.

i

In the 2nd row, these three seats are

strictly identical and can be adjusted for

your comfort. They can be placed in the

table position, folded or removed to ob-

tain a variety of loading conﬁgurations.

Table position

Folding

Forwardsꢀbackwards

adjustment

Once the seat has been placed in the

table position, carry out the following

operations:

 Place the head restraint in the low

position.

 Pull one of the straps B, located at

the front of the seat.

 Fold the seat back fully onto the

seat cushion; the seat automatically

moves back fully.

 move back the seat fully using the

bar A,

 Raise the bar A and slide the seat

forwards or backwards.

 raise the lever C, located at the rear

right of the seat, to release the rear

feet,

 Press on the seat back to lock it.

Seat back angle adjustment

 raise the seat fully so that it remains

in the fully folded position.

 Pull one of the straps B, located

at the front of the seat, then adjust

the angle to one of the 7 positions

offered.

 Release the strap to lock the seat

back in this position.

You can also carry out these op-

These operations allow access to

i

erations from the 3rd row using the

strap B, located at the rear of the

seat.

the 3rd row, exit from the 3rd row

and folding of the seats from the

boot.

66

COMFORT

Removal

Installation

Once the seat has been folded, carry

out the following operations:

 pull the red strap D to release the

Locked

Released

 Check that no object is obstructing

the anchorages on the ﬂoor, so

preventing correct locking seat’s

feet.

 Tiltthefoldedseatrearwards;thefront

and rear feet lock automatically.

 Pull one of the straps B to release

the seat back, then raise it.

front feet of the seat,

 Carry the seat using the carrying

handle E.

 Put the front feet of the seat in place

 lift the seat and carry it using the

carrying handle E.

in the corresponding anchorages.

 Raise the lever C to check that the

rear feet are released.

!

Never use the adjustment straps

to remove, install or carry a seat;

use the carrying handle E provided

for this purpose (weight of the seat:

approximately 18 kg).

Once the seat has been removed,

in order to protect its electronic

systems, it must be stored in a

clean, dry location sheltered from

bad weather.

67

COMFORT

ADDITIONAL SEATS

Folding

Removal

In the 3rd row, these two seats are strictly

identical and are used for the occasional

transportation of additional passengers.

They can be placed in the table position,

folded or removed to obtain a variety of

loading conﬁgurations.

Table position

Once the seat has been placed in the Once the seat has been folded, carry

table position, carry out the following out the following operations:

operations:

 remove the load space screen

 pull the red strap D to release the

front feet of the seat,

roller,

 raise the bar B, located at the rear of

the seat, to release the rear feet,

 raise the seat and secure it to the

head restraint rod of the 2nd row

seat, using the integrated retaining

strap C.

 lift the seat and carry it using the

carrying handle E,

 put the anchorage covers back in

place to obtain a ﬂat boot ﬂoor.

 Place the head restraint in the low

position.

 Pull the strap A, located at the rear

left of the seat.

 Fold the seat back onto the seat

cushion.

Never use the adjustment and re-

!

taining straps to remove, install

or carry a seat; use the carrying

handle E provided for this purpose

(weight of the seat: approximately

15 kg).

68

COMFORT

Installation

 First remove the anchorage covers

on the ﬂoor.

 Carry the seat using the carrying

handle E.

 Put the seat’s front feet in place in

the corresponding anchorages.

 Raise the bar B to check that the

rear feet are released.

 Tilt the folded seat rearwards; the

front and rear feet lock automati-

cally.

 Raise the seat back.

69

COMFORT

SEAT MODULARITY

AND VARIOUS

CONFIGURATIONS

Designed to be modular, your vehicle

offers numerous seat installation and

loading conﬁgurations.

Examples of configurations

7 seats

Special features

The side seats of the 2nd row can be

re-aligned, once the central seat has

been removed.

The 2nd row seats can be installed in

the 3rd row.

Conversely, the 3rd row seats cannot

be installed in the 2nd row.

Do not seat passengers in the 3rd

row if the 2nd row seats are in the

fully folded position.

!

5 seats with additional seats folded

It is imperative that the operations

i

to change the existing conﬁgura-

tion are carried out when stationary

(see paragraphs "Rear seats" and

"Additional seats" of the SW with

panoramic roof).

70

COMFORT

5 seats

Loading of a large volume

5 seats with 2nd row seats reꢀaligned

Transportation of long objects

71

COMFORT

Adjustment

Folding

 from outside; lock the vehicle using

MIRRORS

the remote control or the key.

 from inside; with the ignition on, pull

control A rearwards.

If the mirrors are folded using con-

trol A, they will not unfold when the

vehicle is unlocked. Control A must

be pulled again.

i

Unfolding

 from outside; unlock the vehicle

using the remote control or the key.

 from inside; with the ignition on, pull

control A rearwards.

 Move control A to the right or to

the left to select the corresponding

mirror.

 Move control B in all four directions

to adjust.

Exterior mirrors

Each ﬁtted with an adjustable mirror

permitting the lateral rearward vision

necessary for overtaking or parking.

They can also be folded for parking in

conﬁned spaces.

 Return control A to the central

position.

The folding and unfolding of the exte-

i

rior mirrors using the remote control

can be deactivated by a PEUGEOT

dealer.

!

The objects observed are, in reality,

closer than they appear.

Take this into account in order to

correctly judge the distance of ve-

hicles approaching from behind.

72

COMFORT

Automatic tilting in reverse gear

Switching off

 Exit reverse gear and wait twenty

seconds.

or

 Return control A to the central

Interior mirror

System which provides a view of the

ground during parking manoeuvres in

reverse gear.

Adjustable mirror providing a central

rearward view.

Manual model

position.

The mirror glass returns to its initial po-

sition.

The mirror is ﬁtted with a night-time anti-

dazzle device.

The mirror glass also returns to its initial

position:

-

if the speed exceeds 6 mph (10 km/h)

if the engine is switched off.

,

Programming

 With the engine running, engage

reverse gear.

 Select and adjust the left-hand and

right-hand mirrors in succession.

The adjustment is stored immediately.

Adjustment

 Adjust the mirror so that the glass

is directed correctly in the "day"

position.

Day/night position

 Pull the lever to change to the "night"

anti-dazzle position.

 Push the lever to change to the

normal "day" position.

Switching on

 With the engine running, engage

reverse gear.

 Move control A. to the right or to

the left to select the corresponding

mirror.

The glass of the mirror selected tilts

downwards, in accordance with its

programming.

As a safety precaution, the mirrors

must be adjusted to reduce the

"blind spot".

!

73

COMFORT

Automatic tilting in reverse gear

Switching off

 Exit reverse gear and wait twenty

seconds.

or

 Return control A to the central

Interior mirror

System which provides a view of the

ground during parking manoeuvres in

reverse gear.

Adjustable mirror providing a central

rearward view.

Manual model

position.

The mirror glass returns to its initial po-

sition.

The mirror is ﬁtted with a night-time anti-

dazzle device.

The mirror glass also returns to its initial

position:

-

if the speed exceeds 6 mph (10 km/h)

if the engine is switched off.

,

Programming

 With the engine running, engage

reverse gear.

 Select and adjust the left-hand and

right-hand mirrors in succession.

The adjustment is stored immediately.

Adjustment

 Adjust the mirror so that the glass

is directed correctly in the "day"

position.

Day/night position

 Pull the lever to change to the "night"

anti-dazzle position.

 Push the lever to change to the

normal "day" position.

Switching on

 With the engine running, engage

reverse gear.

 Move control A. to the right or to

the left to select the corresponding

mirror.

The glass of the mirror selected tilts

downwards, in accordance with its

programming.

As a safety precaution, the mirrors

must be adjusted to reduce the

"blind spot".

!

73

COMFORT

Switching on

Automatic day/night model

STEERING WHEEL

ADJUSTMENT

 Switch on the ignition and press

switch 1.

The indicator light 2 comes on and the

System which automatically and pro-

gressively changes between the day

and night uses.

The height and depth of the steering

wheel can be adjusted to adapt the driv-

ing position to the size of the driver.

mirror operates automatically.

Switching off

 Press switch 1.

The indicator light 2 switches off and

the mirror remains in its lightest state.

i

In order to guarantee optimum vis-

ibility during your manoeuvres, the

mirror lightens automatically when

reverse gear is engaged.

In order to prevent dazzle, the interior

mirror glass darkens automatically in

relation to the intensity of the light from

the rear.

Adjustment

 When stationary, pull the control to

unlock the steering wheel.

 Adjust the height and depth.

 Push the control to lock the steering

wheel.

It lightens when the light (light beam of

following vehicles, sun...) decreases, so

guaranteeing optimum visibility.

!

As a safety precaution, it is impera-

tive that these operations are carried

out while the vehicle is stationary.

74

COMFORT

Switching on

Automatic day/night model

STEERING WHEEL

ADJUSTMENT

 Switch on the ignition and press

switch 1.

The indicator light 2 comes on and the

System which automatically and pro-

gressively changes between the day

and night uses.

The height and depth of the steering

wheel can be adjusted to adapt the driv-

ing position to the size of the driver.

mirror operates automatically.

Switching off

 Press switch 1.

The indicator light 2 switches off and

the mirror remains in its lightest state.

i

In order to guarantee optimum vis-

ibility during your manoeuvres, the

mirror lightens automatically when

reverse gear is engaged.

In order to prevent dazzle, the interior

mirror glass darkens automatically in

relation to the intensity of the light from

the rear.

Adjustment

 When stationary, pull the control to

unlock the steering wheel.

 Adjust the height and depth.

 Push the control to lock the steering

wheel.

It lightens when the light (light beam of

following vehicles, sun...) decreases, so

guaranteeing optimum visibility.

!

As a safety precaution, it is impera-

tive that these operations are carried

out while the vehicle is stationary.

74

Download User Manual App

COMFORT for Your Peugeot 308 4 Door First Genration (2007-2013)

Related Topics

Popular Owner Manuals

Latest Owner Manuals