Get LAYOUT -> BOOT LAYOUT Guide for Peugeot 308 4 Door First Genration (2007-2013)

LAYOUT

BOOT LAYOUT

1. Rear shelf or shelf with integrated

storage compartment

(see details on following page)

2. Hooks

(see details on following page)

3. 12 V accessories socket

(see details on following page)

4. Stowing rings

5. Luggage retaining net

(see details on following page)

6. Movable straps

(see details on following page)

7. Luggage retaining strap

8. Enclosed storage tray

9. Open storage tray

10. Storage box

(see details on following page)

LAYOUT

Rear shelf

Shelf with integrated storage

compartment

Hooks

This permits the storage of any object so

that it cannot be seen from the outside

and without hindering rearward visibility.

The hooks permit the securing of shop-

ping bags.

To remove the shelf:

 unhook the two cords,

 raise the shelf slightly, then remove it.

To remove the shelf:

 unhook the two cords,

 raise the shelf slightly, then remove it.

There are several options for storing the

shelf:

-

either upright behind the front

seats,

or upright behind the rear seats

using one of the movable straps.

There are several options for storing the

shelf:

-

either upright behind the front

seats,

-

or upright behind the rear seats

using one of the movable straps.

 To open the cover, from inside

or outside, raise one of the two

handles.

 To close the cover, ﬁrst raise the

handle.

i

When changing a wheel

An additional hook, under the shelf,

permits easy access to the spare

wheel by retaining the boot carpet

by means of its cord.

 To remove the cover, raise both

handles at the same time.

107

LAYOUT

12 V accessories socket

Luggage retaining net

Storage box

Hooked onto the stowing rings, this en-

ables you to secure your luggage.

 In order to connect a 12 V accessory

(max power: 100 Watts), remove

the cap and connect the appropriate

adaptor.

 Raise the boot carpet to gain access

to the storage box.

This has areas for storing a box of spare

bulbs, a ﬁrst aid kit, a puncture repair

kit, two warning triangles, ...

 Turn the key to the ignition position.

Movable straps

There are three possible positions:

-

ﬂat at the bottom of the boot,

horizontal at the rear shelf,

vertical at the back of the rear

seats.

Hooked onto the stowing rings, they

permit securing of your luggage.

108

LAYOUT

BOOT LAYOUT

1. Load space cover

(see details on following page)

2. 12 V accessories socket

(see details on following page)

3. Hooks

(see details on following page)

4. Stowing rings

5. Luggage retaining net

(see details on following page)

6. Storage tray

7. High load retaining net

(see details on following page)

8. Luggage retaining strap

9. Storage nets

109

LAYOUT

Load space cover

Luggage retaining net

This consists of four sections three of

which can be folded back on each other.

There are several options for storing the

load space cover:

-

either folded back on itself near the

rear seats (1),

-

or folded back on itself and stored

in a location provided under the rear

seats (2).

To fold it from the boot:

 unclip the load space cover from its

side supports,

Hooked onto the stowing rings, this en-

ables you to secure your luggage to the

bottom of the boot.

 take hold of the load space cover by

its handle A,

 fold it concertina-style to the rear

seats.

Hooks

To unfold it from the boot:

 take hold of the load space cover by

its handle A,

 unfold it to the boot pillars,

 clip the load space cover on its side

supports.

i

Maximum loads

7.5 kg, load space cover unfolded

with high load retaining net at row 2.

The hooks permit the securing of shop-

ping bags.

110

LAYOUT

High load retaining net

Hooked onto the special upper and low-

er ﬁxings, this permits use of the entire

loading volume up to the roof:

-

behind the rear seats (row 2),

behind the front seats (row 1) when

the rear seats are folded.

i

When positioning the net, check

that the strap loops are visible from

the boot; this will make slackening

or tightening easier.

To use it in row 1: To use it in row 2:

 open the covers of the upper ﬁxings 1,  fold or remove the load space

cover,

 open the covers of the upper ﬁxings 2,

metal bar in the corresponding upper  unroll the high load retaining net,

 unroll the high load retaining net,

 position one of the ends of the net’s

ﬁxing 1, then do the same with the

other end,

 slacken the straps fully,

 ﬁx the snap hook of each of the

 position one of the ends of the net’s

metal bar in the corresponding upper

ﬁxing 2, then do the same with the

other end,

straps on the corresponding bar 3,  ﬁx the snap hook of each of the

located under the cushion of the

rear seats,

straps in the corresponding ring 4,

located on the rear seats mechanism

support,

 fold the rear seats,

 tighten the straps,

 check that the net is hooked and

 tighten the straps,

 check that the net is hooked and

tightened correctly.

i

This net can be stored in the stor-

age tray on the ﬂoor.

111

LAYOUT

BOOT LAYOUT

1. Load space screen

(see details on following page)

2. Storage box

3. 12 V accessories socket

(see details on following page)

4. Hooks

(see details on following page)

5. Stowing rings

6. Luggage retaining net

(see details on following page)

7. High load retaining net

(see details on following page)

8. Rear armrests with can holder

9. Luggage retaining strap

10. Storage nets

11. Location for torch or for HiꢀFi

ampliﬁer

(see details on following page)

LAYOUT

Load space screen

Luggage retaining net

To remove the load space screen:

 remove the load space screen

guides from the rails on the boot

pillars,

 roll up the load space screen in its

roller,

 pull and support the catch at one of

the ends of the roller to release it,

 remove the roller from its support

from the released end, then from the

second.

To install the load space screen:

 position one of the ends of the roller

in its support,

 insert the second end in its support;

the catch locks automatically,

 unroll the load space screen to the

boot pillars,

 insert the load space screen guides

in the rails on the boot pillars.

To store the load space screen, place it

at the boot sill, roller uppermost and ﬂap

facing inwards.

i

You can access the boot by open-

ing the rear screen and raising the

load space screen ﬂap.

The roller has two rings for ﬁxing

the luggage retaining net depend-

ing on its location.

Hooked onto the stowing rings on the

ﬂoor and/or on the load space screen

roller, this enables you to secure your

luggage.

113

LAYOUT

High load retaining net

12 V accessories socket

Hooked onto the special upper and low-

er ﬁxings, this permits use of the entire

loading volume up to the roof behind

the seats of the 2nd row.

i

When positioning the net, check

that the strap loops are visible from

the boot; this will make slackening

or tightening easier.

 In order to connect a 12 V accessory

(max power: 100 Watts), remove

the cap and connect the appropriate

adaptor.

To use the net in the 2nd row (additional

seats folded or removed):

 roll up or remove the load space

screen,

 Turn the key to the ignition position.

 open the covers of the upper ﬁxings 1,

 unroll the high load retaining net,

 position one of the ends of the net’s

metal bar in the corresponding upper

ﬁxing 1, then do the same with the

other end,

Hooks

 attach the snap hook of each of the

net’s straps in the corresponding

ring 2, located on the lower ﬁxing of

the rear side seat belt,

 tighten the straps,

 check that the net is hooked and

tightened correctly.

The hooks permit the securing of shop-

ping bags.

114

LAYOUT

Torch

Side blinds

This is a removable light, incorporated

in the boot wall, which can be used to

light the boot or as a torch.

Fitted on the rear windows of the 2nd

row, these protect your young children

from the sun.

For the boot lighting function, refer to

the "Visibility - § Boot lighting" section.

Use

 Extract the torch from its location

pulling it upwards.

 Press the switch, located on the

back, to switch the torch on or off.

 Unfold the support, located on the

back, to set down and raise the

torch; for example, when changing

a wheel.

 Pull the blind by the central tab.

 Position the blind attachments on

the corresponding hooks.

Operation

This torch operates with NiMH type ac-

cumulators.

Storing

 Put the torch back in place in its

location starting with the lower part.

It has an operating autonomy of approx-

imately 45 minutes and charges while

you are driving.

If you have forgotten to switch

off the torch, this switches it off

automatically.

!

i

Observe the polarities when ﬁtting

the accumulators.

Never replace the accumulators

with batteries.

It the torch is not engaged correct-

ly, it may not charge and may not

come on when the boot is opened.

115

Download User Manual App

LAYOUT -> BOOT LAYOUT for Your Peugeot 308 4 Door First Genration (2007-2013)

Related Topics

LAYOUT

Popular Owner Manuals

Latest Owner Manuals