Get VISIBILITY -> LIGHTING CONTROLS Guide for Peugeot 308 4 Door First Genration (2007-2013)

VISIBILITY

LIGHTING CONTROLS

Manual controls

System for selection and control of the

various front and rear lights providing

the vehicle’s lighting.

The lighting commands are issued di-

rectly by the driver by means of the ring

A and the lever B.

Model without AUTO lighting

A. main lighting mode selection ring,

with:

Main lighting

The various front and rear lights of the

vehicle are designed to adapt the driv-

er’s visibility progressively in relation to

the climatic conditions:

lights off,

-

side lights, to be seen,

dipped headlamps to see without

dazzling other drivers,

automatic switching on of

the lights,

-

main beam headlamps to see clearly

when the road is clear,

directional headlamps for improved

visibility when cornering.

side lights only,

dipped headlamps or main

beam headlamps.

Additional lighting

Otherlightsareinstalledtofulﬁltherequire-

ments of particular driving conditions:

Model with AUTO lighting

B. lever for inversion of the lights by

pulling: dipped headlamps/main beam

headlamps.

In the lights off and side lights modes,

the driver can switch on the main beam

headlamps directly ("headlamp ﬂash")

for as long as he pulls the lever.

-

rear fog lamps to be seen from a

distance,

front fog lamps for even better

visibility,

daytime lights to be seen during the

day.

Programming

Various automatic lighting control

modes are also available according to

the following options:

Displays

Lighting of the corresponding indicator

light on the instrument panel conﬁrms

the selective switching on of the lighting

selected.

-

follow-me-home lighting,

automatic lighting,

directional lighting

90

VISIBILITY

C. fog lamps selection ring.

The fog lamps operate with the dipped

and main beam headlamps.

!

In good or rainy weather, both day

and night, the front fog lamps and

the rear fog lamp are prohibited. In

these situations, the power of their

beams may dazzle other drivers.

Model with rear fog lamp only

rear fog lamp

Do not forget to switch off the front

fog lamps and the rear fog lamp

when they are no longer neces-

sary.

 To switch on the fog lamp, turn the

ring C forwards.

When the lights are switched off auto-

matically (with AUTO model), the fog

lamp and the dipped headlamps will re-

main on.

 To switch off all of the lights, turn the

ring C rearwards.

i

Lights on buzzer

The triggering of an audible signal

when a front door is opened warns

the driver that he has forgotten to

switch off his vehicle’s lights, with

the ignition off and in manual lights

mode.

Model with front and rear fog lamps

front and rear fog lamps

 To switch on the fog lamps, turn the

ring C forwards.

 To switch off the rear fog lamp,

turn the ring C rearwards twice in

succession.

When the lights are switched off auto-

matically (with AUTO model) or when

the dipped headlamps are switched off

manually, the fog lamps and the side

lights will remain on.

In this case, switching off the lights

stops the audible signal.

With the ignition off, if the dipped

headlamps remain on, they will

switch off automatically after thirty

minutes to prevent discharging of

the battery.

 Turn the ring rearwards to switch

off the fog lamps, the side lights will

then switch off.

91

VISIBILITY

Daytime lights

Followꢀmeꢀhome lighting

Exterior welcome lighting

On vehicles ﬁtted with daytime lights, The temporary maintaining of the The remote switching on of the lights

the corresponding lights comes on dipped headlamps lighting after the ve- makes your approach to the vehicle

when the vehicle is started*.

hicle’s ignition has been switched off easier in poor light when in automatic

makes the driver’s exit easier when the switching on of the lights mode.

light is poor.

The instruments and controls (instru-

ment panel, multifunction display, air

conditioning control panel, ...) are not

lit, except on switching to the automatic

switching on of the lights mode or when

the lights are switched on manually.

Switching on

 Press the open padlock on the

remote control.

The dipped headlamps and the side

lights come on; your vehicle is also

unlocked.

Programming

Switching off

The function is activated or

deactivated via the multi-

function display conﬁgura-

tion menu.

The exterior welcome lighting switches

off automatically after a set time, when

the ignition is switched on or on locking

the vehicle.

In countries in which this function is im-

posed by regulations*, it is activated by

default.

The side lights and the number plate

lights are also switched on.

Programming

The duration of maintaining

of the lighting is selected

via the multifunction dis-

play conﬁguration menu.

Switching on

 With the ignition off, "ﬂash" the

headlamps using the lever B.

 A second "headlamp ﬂash" switches

the function off again.

Switching off

The follow-me-home lighting switches

off automatically after a set time.

i

In other countries, this function is

deactivated by default.

Only the daytime lights, incorporat-

ed in the side light bulbs, come on

when the function is activated.

The duration of the welcome light-

i

ing is associated with and identical

to that of the automatic follow-me-

home lighting.

* According to country.

92

VISIBILITY

Coupling with the

"Followꢀmeꢀhome" lighting

Association with the automatic lighting

provides the "follow-me-home" lighting

with the following additional options:

Automatic lighting

MANUAL HEADLAMP

ADJUSTMENT

The side lights and dipped headlamps

are switched on automatically, without

any action on the part of the driver,

when a low level of external light is de-

tected or in certain cases of activation

of the windscreen wipers.

As soon as the brightness returns to a

sufﬁcient level or after the windscreen

wipers are switched off, the lights are

switched off automatically.

-

selection of the duration of

maintaining of the lighting for 15,

30 or 60 seconds in the vehicle

parameters on the multifunction

display conﬁguration menu,

-

automatic activation of "follow-me-

home" lighting when automatic

lighting is in operation.

To avoid causing a nuisance to other

road users, the height of the halogen

headlamps should be adjusted in rela-

tion to the load in the vehicle.

0. 1 or 2 people in the front seats.

ꢀ. 3 people.

1. 5 people.

Operating fault

In the event of a malfunction of

the brightness sensor, the lights

come on, this warning light is

displayed on the instrument

panel and/or a message appears on

the multifunction display, accompanied

by an audible signal.

2. 5 people + maximum authorised load.

3. Driver + maximum authorised load.

Consult a PEUGEOT dealer.

Activation

 Turn ring

A

to the "AUTO"

In fog or snow, the brightness

!

position. The automatic lighting is

accompanied by a message on the

multifunction display.

sensor may detect sufﬁcient light.

Therefore, the lights will not come

on automatically.

Do not cover the brightness sen-

sor, coupled with the rain sensor

and located in the centre of the

windscreen behind the interior mir-

ror; the associated functions would

no longer be controlled.

Deactivation

 Turn ring A to a position other

than "AUTO". Deactivation is

accompanied by a message on the

multifunction display.

The initial setting is position "0".

i

93

VISIBILITY

Daytime lights

Followꢀmeꢀhome lighting

Exterior welcome lighting

On vehicles ﬁtted with daytime lights, The temporary maintaining of the The remote switching on of the lights

the corresponding lights comes on dipped headlamps lighting after the ve- makes your approach to the vehicle

when the vehicle is started*.

hicle’s ignition has been switched off easier in poor light when in automatic

makes the driver’s exit easier when the switching on of the lights mode.

light is poor.

The instruments and controls (instru-

ment panel, multifunction display, air

conditioning control panel, ...) are not

lit, except on switching to the automatic

switching on of the lights mode or when

the lights are switched on manually.

Switching on

 Press the open padlock on the

remote control.

The dipped headlamps and the side

lights come on; your vehicle is also

unlocked.

Programming

Switching off

The function is activated or

deactivated via the multi-

function display conﬁgura-

tion menu.

The exterior welcome lighting switches

off automatically after a set time, when

the ignition is switched on or on locking

the vehicle.

In countries in which this function is im-

posed by regulations*, it is activated by

default.

The side lights and the number plate

lights are also switched on.

Programming

The duration of maintaining

of the lighting is selected

via the multifunction dis-

play conﬁguration menu.

Switching on

 With the ignition off, "ﬂash" the

headlamps using the lever B.

 A second "headlamp ﬂash" switches

the function off again.

Switching off

The follow-me-home lighting switches

off automatically after a set time.

i

In other countries, this function is

deactivated by default.

Only the daytime lights, incorporat-

ed in the side light bulbs, come on

when the function is activated.

The duration of the welcome light-

i

ing is associated with and identical

to that of the automatic follow-me-

home lighting.

* According to country.

92

VISIBILITY

Coupling with the

"Followꢀmeꢀhome" lighting

Association with the automatic lighting

provides the "follow-me-home" lighting

with the following additional options:

Automatic lighting

MANUAL HEADLAMP

ADJUSTMENT

The side lights and dipped headlamps

are switched on automatically, without

any action on the part of the driver,

when a low level of external light is de-

tected or in certain cases of activation

of the windscreen wipers.

As soon as the brightness returns to a

sufﬁcient level or after the windscreen

wipers are switched off, the lights are

switched off automatically.

-

selection of the duration of

maintaining of the lighting for 15,

30 or 60 seconds in the vehicle

parameters on the multifunction

display conﬁguration menu,

-

automatic activation of "follow-me-

home" lighting when automatic

lighting is in operation.

To avoid causing a nuisance to other

road users, the height of the halogen

headlamps should be adjusted in rela-

tion to the load in the vehicle.

0. 1 or 2 people in the front seats.

ꢀ. 3 people.

1. 5 people.

Operating fault

In the event of a malfunction of

the brightness sensor, the lights

come on, this warning light is

displayed on the instrument

panel and/or a message appears on

the multifunction display, accompanied

by an audible signal.

2. 5 people + maximum authorised load.

3. Driver + maximum authorised load.

Consult a PEUGEOT dealer.

Activation

 Turn ring

A

to the "AUTO"

In fog or snow, the brightness

!

position. The automatic lighting is

accompanied by a message on the

multifunction display.

sensor may detect sufﬁcient light.

Therefore, the lights will not come

on automatically.

Do not cover the brightness sen-

sor, coupled with the rain sensor

and located in the centre of the

windscreen behind the interior mir-

ror; the associated functions would

no longer be controlled.

Deactivation

 Turn ring A to a position other

than "AUTO". Deactivation is

accompanied by a message on the

multifunction display.

The initial setting is position "0".

i

93

VISIBILITY

Coupling with the

"Followꢀmeꢀhome" lighting

Association with the automatic lighting

provides the "follow-me-home" lighting

with the following additional options:

Automatic lighting

MANUAL HEADLAMP

ADJUSTMENT

The side lights and dipped headlamps

are switched on automatically, without

any action on the part of the driver,

when a low level of external light is de-

tected or in certain cases of activation

of the windscreen wipers.

As soon as the brightness returns to a

sufﬁcient level or after the windscreen

wipers are switched off, the lights are

switched off automatically.

-

selection of the duration of

maintaining of the lighting for 15,

30 or 60 seconds in the vehicle

parameters on the multifunction

display conﬁguration menu,

-

automatic activation of "follow-me-

home" lighting when automatic

lighting is in operation.

To avoid causing a nuisance to other

road users, the height of the halogen

headlamps should be adjusted in rela-

tion to the load in the vehicle.

0. 1 or 2 people in the front seats.

ꢀ. 3 people.

1. 5 people.

Operating fault

In the event of a malfunction of

the brightness sensor, the lights

come on, this warning light is

displayed on the instrument

panel and/or a message appears on

the multifunction display, accompanied

by an audible signal.

2. 5 people + maximum authorised load.

3. Driver + maximum authorised load.

Consult a PEUGEOT dealer.

Activation

 Turn ring

A

to the "AUTO"

In fog or snow, the brightness

!

position. The automatic lighting is

accompanied by a message on the

multifunction display.

sensor may detect sufﬁcient light.

Therefore, the lights will not come

on automatically.

Do not cover the brightness sen-

sor, coupled with the rain sensor

and located in the centre of the

windscreen behind the interior mir-

ror; the associated functions would

no longer be controlled.

Deactivation

 Turn ring A to a position other

than "AUTO". Deactivation is

accompanied by a message on the

multifunction display.

The initial setting is position "0".

i

93

VISIBILITY

AUTOMATIC ADJUSTMENT

OF THE DIRECTIONAL

HEADLAMPS

DIRECTIONAL LIGHTING

Programming

When the dipped or main beam head-

lamps are on, this function enables the

light beam to follow the direction of the

road.

The function is activated or

deactivated via the multi-

function display conﬁgura-

tion menu.

The use of this function, coupled with

the xenon headlamps only, considera-

bly improves the quality of your lighting

when cornering.

with directional lighting

Operating fault

If a malfunction occurs, this

warning light ﬂashes on the in-

strument panel, accompanied

by a message on the multifunc-

tion display.

In order to avoid causing a nuisance to

other road users, this system corrects

the height of the xenon headlamps beam

automatically and when stationary, in re-

lation to the load in the vehicle.

Consult a PEUGEOT dealer.

If a malfunction occurs, this

warning light and/or the service

warning light is displayed on the

instrument panel, accompanied

by an audible signal and a message on

the multifunction display.

without directional lighting

The system then places your head-

lamps in the lowest position.

When stationary or moving at very

low speed or when reverse gear is

engaged, the function is inactive.

i

The status of the function remains

in the memory when the ignition is

switched off.

!

Do not touch the xenon headlamps.

Consult a PEUGEOT dealer.

94

VISIBILITY

AUTOMATIC ADJUSTMENT

OF THE DIRECTIONAL

HEADLAMPS

DIRECTIONAL LIGHTING

Programming

When the dipped or main beam head-

lamps are on, this function enables the

light beam to follow the direction of the

road.

The function is activated or

deactivated via the multi-

function display conﬁgura-

tion menu.

The use of this function, coupled with

the xenon headlamps only, considera-

bly improves the quality of your lighting

when cornering.

with directional lighting

Operating fault

If a malfunction occurs, this

warning light ﬂashes on the in-

strument panel, accompanied

by a message on the multifunc-

tion display.

In order to avoid causing a nuisance to

other road users, this system corrects

the height of the xenon headlamps beam

automatically and when stationary, in re-

lation to the load in the vehicle.

Consult a PEUGEOT dealer.

If a malfunction occurs, this

warning light and/or the service

warning light is displayed on the

instrument panel, accompanied

by an audible signal and a message on

the multifunction display.

without directional lighting

The system then places your head-

lamps in the lowest position.

When stationary or moving at very

low speed or when reverse gear is

engaged, the function is inactive.

i

The status of the function remains

in the memory when the ignition is

switched off.

!

Do not touch the xenon headlamps.

Consult a PEUGEOT dealer.

94

Download User Manual App

VISIBILITY -> LIGHTING CONTROLS for Your Peugeot 308 4 Door First Genration (2007-2013)

Related Topics

VISIBILITY

Popular Owner Manuals

Latest Owner Manuals