Access
► Switch on the ignition; this stops the alarm.
The indicator lamp in the button goes off.
The electric window controls remain
operational for approximately 45 seconds
after switching off the ignition.
Electric windows
Locking the vehicle without
activating the alarm
After that time, the controls are disabled. To
reactivate them, switch the ignition on again.
► Lock the vehicle using the key (built-in the
Anti-pinch
remote control) in the front left-hand door lock.
If the window meets an obstacle while rising, it
stops and immediately partially lowers again.
Automatic activation
(Depending on version)
Deactivating the rear
controls for the rear electric
windows
For your children's safety, press control 5
to deactivate the controls for the rear
electric windows, irrespective of their positions.
The red indicator lamp in the button comes on.
The rear electric windows can still be controlled
using the driver's controls.
1. Left-hand front
2. Right-hand front
3. Left-hand rear
4. Right-hand rear
5. Deactivation of electric window controls
located by rear seats
The system is activated automatically 2 minutes
after the last door or the boot is closed.
► To avoid triggering the alarm on entering the
vehicle, first press the unlocking button on the
remote control or unlock the vehicle using the
"Keyless Entry and Start" system.
Malfunction
When the ignition is switched on, the fixed
lighting of the red indicator lamp in the button
indicates a system malfunction.
Have it checked by a PEUGEOT dealer or a
qualified workshop.
Manual operation
► To open/close the window, press/pull the
switch without passing the point of resistance;
the window stops as soon as the switch is
released.
Reinitialising the electric
windows
After reconnecting the battery, or in the event
of abnormal window movement, the anti-pinch
function must be reinitialised.
The anti-pinch function is disabled during the
following sequence of operations.
For each window:
Automatic operation
► To open/close the window, press/pull the
switch past its resistance point: the window
opens/closes completely when the switch is
released.
Operating the switch again stops the movement
of the window.
► Pull the control until the window is fully
closed.
40
English 