Safety
► Remove and stow the head restraint before
installing the child seat on this seat (refit it once
the child seat has been removed).
"RÖMER Baby-Safe and its ISOFIX base"
(size category: E)
► Pass the strap of the child seat behind the
seat backrest, centring it between the openings
for the head restraint rods.
Group 0+: from birth to 13 kg
► Secure the upper strap hook to ring B.
► Tighten the upper strap.
Installed "rearward facing" using an ISOFIX
base which is attached to rings A.
When fitting an ISOFIX child seat to the
left-hand rear seat of the bench seat,
before fitting the seat, first move the centre
rear seat belt towards the middle of the
vehicle, so as to avoid the seat interfering
with the operation of the seat belt.
These rings are located behind zips.
The 2 latches on ISOFIX child seats are
secured to them.
– One ring B, located behind the seat, called the
TOP TETHER, for attaching seats fitted with an
upper strap.
The base has a support leg, height-
adjustable, which rests on the vehicle's floor.
This child seat can also be secured with a
seat belt. In this case, only the shell is used
and attached to the vehicle seat using the
three-point seat belt.
An incorrectly installed child seat in a
vehicle compromises the child's safety in
the event of an accident.
Strictly observe the fitting instructions
provided in the user guide supplied with the
child seat.
"RÖMER Duo Plus ISOFIX"
(size category: B1)
Group 1: from 9 to 18 kg
For information about the options for
fitting ISOFIX child seats in your vehicle,
refer to the summary table.
This system prevents the child seat from tipping
forwards in the event of a front impact.
This ISOFIX mounting system provides fast,
reliable and safe fitting of the child seat in the
vehicle.
Recommended ISOFIX child seats
Also consult the user guide from the child
seat’s manufacturer to find out how to
install and remove the seat.
To secure the child seat to the TOP TETHER:
92
English 