ACCESS
Deactivating the passenger and rear
electric window switches
Reinitialising the electric windows
Following reconnection of the battery or
after the safety anti-pinch has been trig-
gered three times in succession, you
must reinitialise the safety anti-pinch
function:
Always remove the key from the
ignition when leaving the vehicle,
even for a short time.
In the event of contact during
operation of the windows, you
must reverse the movement of
the window. To do this, press the
switch concerned.
When the driver operates the pas-
senger electric window switches,
they must ensure that no one is
preventing correct closing of the
windows.
The driver must ensure that
passengers use the electric win-
dows correctly.
)
with the door closed, lower the win-
dow completely then raise it again, it
will rise in steps of a few centimetres
each time the switch is pressed, re-
peat the operation until the window
is fully closed,
3
) continue to press the switch for at
least one second after reaching the
window closed position.
The safety anti-pinch function is not
active during these operations.
) For the safety of your children, press
switch 5 to prevent operation of the
passenger and rear electric windows
irrespective of their position.
Be aware of children when oper-
ating the windows.
When the button is pressed down, the
switches are deactivated.
When the button is raised, the switches
are activated.
When the button is pressed down,
you can open or close all of the
windows using the switches on
the driver's door.
English 