Get AUDIO EQUIPMENT and TELEMATICS -> Audio CD system Guide for Peugeot 4007 4 Door 2012-2017

AUDIO EQUIPMENT and TELEMATICS

AUDIO CD SYSTEM

Eject one or more

CDs.

CD slot.

Load one or more discs.

Selection and adjustment of

audio settings (BASS,

TREBLE, ...).

Manual search for a lower

or higher radio frequency/

PTY.

Audio system On/Off.

Decrease/Increase volume.

Functions setting mode

(AF, REG, TP, SCV, ...).

Search for the previous or

next MP3 folder.

Selection of CD/

Changer mode.

11

Selection of radio mode.

Selection of waveband

(FM, MW, LW).

Automatic station storing

(autostore).

Automatic search for a

lower radio frequency.

Search for the previous

track.

Automatic search for a

higher radio frequency.

Search for the next track.

AUDIO EQUIPMENT and TELEMATICS

Fast backwards play.

Display CD-Text/MP3/Tag ID3

information.

Multifunction screen.

Search for TP trafﬁc

information.

Scroll information by page.

Activation/

Deactivation of PTY.

Play the beginning of each

track (MP3 folder/disc).

Repeat (track/

MP3 folder/disc).

Manual storing and recall

of radio stations/

PTY (12 to 17).

Selection of the previous disc.

Selection of the next disc.

11

Random play (tracks/MP3

folder/disc).

Fast forwards play.

AUDIO EQUIPMENT and TELEMATICS

STEERING MOUNTED CONTROLS

Switching on

Searching in radio mode

Press button 1 for more than two seconds. Press button 4 or 5 to search for a higher

or lower radio frequency respectively.

The last source selected before switching

off comes back into operation.

Switching off Searching in CD mode

Press button 1 for more than two seconds. Press button 4 or 5 to select the next or

previous track on the CD respectively.

Press and hold button 4 or 5 for fast for-

wards or fast backwards playing of the

current track of the CD respectively.

Selecting the source

Press button 1.

1. On/Off and selection of radio or

CD mode

2. Volume decrease

The source changes in the following order:

FM1/FM2/FM3/MW/LW/CD/FM1...

3. Volume increase

While a track is being played,

press button 5 once to return to

the beginning of this track.

4. Search for a higher radio

frequency/Next track/Fast

forwards play

5. Search for a lower radio frequency/

Previous track/Fast backwards play

Adjusting the volume

Press and hold button 2 or 3 to decrease

or increase the volume respectively.

They can be used when the ignition

switch is in the "ON" or "ACC" position.

11

AUDIO EQUIPMENT and TELEMATICS

GENERAL FUNCTIONS

Switching on

Setting the audio modes

Selecting the musical ambience

"TYPE"

Press the "PWR" button.

Press the "SOUND" but-

ton several times; the audio

modes change in the following

order:

SUB PUNCH/TYPE/FIELD/

BASS/MID/TREBLE/FADER/

BALANCE/OFF.

Turn the "SOUND" dial; the

musical ambiences change

in the following order:

The last source selected be-

fore switching off resumes

operation.

C L A S S I C / J A Z Z / P O P /

ROCK/HIP-HOP.

Once the ambience has been selected,

The audio equipment func-

tions can be used when the ignition

switch is in the "ON" or "ACC" position.

press the "SOUND" button to conﬁrm.

"CLASSIC": optimises the acoustics to

obtain perfect equalisation of the sound

for classical music.

"JAZZ": optimises the acoustics to ob-

tain an ambient sound with speciﬁc

modulations in the bass, mid tone and

treble for jazz.

"POP": optimises the acoustics to ob-

tain clear vocals and modulation of the

bass and treble for pop music.

"ROCK": optimises the acoustics to ob-

tain a sound in harmony with the rhythm

which places the emphasis on the mid

tone for rock music.

Switching off

Quick access mode

Press the "PWR" button again.

To access the personalised sound func-

tions quickly, press and hold this button,

then turn it to reach the personalised

sound setting of your choice.

Release the button to store the setting.

Adjusting the volume

Turn the "VOL" dial respec-

tively to the left to decrease

the volume or to the right to

increase it.

"Hold" mode

If you press this button for more than

2 econds in the audio setting mode, the

system switches to "Hold" mode. The

audio mode selected will be retained

until you press this button again for

more than 2 seconds.

"HIP-HOP": optimises the acoustics to

obtain a powerful sound and accentua-

tion of the bass for hip-hop music.

11

The audio setting mode is deacti-

vated when the radio is operated

or a CD is played or after approxi-

mately 10 seconds without any

action.

If the "TYPE" is changed, the

sound cuts out brieﬂy.

AUDIO EQUIPMENT and TELEMATICS

Selecting the surround effect

"FIELD"

Setting the bass "BASS"

Setting the volume of the bass

unit "SUB PUNCH"

Turn the "SOUND" dial to Turn the "SOUND" dial to set the volume

Turn the "SOUND" dial; the

surround effects change in

the following order:

NORMAL/STAGE/LIVE/

HALL.

set the required bass value. of the bass unit.

Only vehicles ﬁtted with the "Premium

Sound" system can offer the "SUB

PUNCH" setting.

Setting the mid tone "MID"

Once the surround effect has been se-

lected, press the "SOUND" button to

conﬁrm.

Turn the "SOUND" dial to set the re-

quired mid tone value.

If the "SUB PUNCH" is changed,

the sound cuts out brieﬂy.

"NORMAL": produces a sound in which

the voices are at the front and the in-

struments surround the listener.

"STAGE": produces a sound in which

the voices are immediately facing the

listener, as on a stage.

"LIVE": produces a sound similar to

that of a live show, in which the sound

reaches the listener from all directions.

"HALL": produces a sound similar to

that of a concert hall with deﬂection of

the sound.

Setting the treble "TREBLE"

Automatic volume adjustment

"SCV"

Turn the "SOUND" dial to set the re-

quired treble value.

This permits automatic adjustment of

the "VOLUME", "BASS", "MID" and

"TREBLE" settings in relation to the ve-

hicle speed.

Setting the front/rear sound

distribution "FADER"

Press the "SOUND" button

for more than two seconds

to gain access to the func-

tions setting mode.

Turn the "SOUND" dial to set the bal-

ance of the volume of the front and rear

speakers.

Then, press this same but-

ton several times; the func-

tions setting mode changes in the fol-

lowing order:

Setting the right/left sound

distribution "BALANCE"

11

Turn the "SOUND" dial to set the bal-

ance of the volume of the right and left

speakers.

AF/CT/REG/TP-S/PTY

SCV/PHONE/OFF.

(languages)/

Turn the "SOUND" dial respectively to

the left to deactivate the function or to

the right to activate it.

If the "FIELD" is changed, the

sound cuts out brieﬂy.

If the value "0" is set, an audible

signal will be heard.

AUDIO EQUIPMENT and TELEMATICS

RADIO

Selecting radio mode

Manual station search

Automatic station storing

Press the "PWR" button

or the "AM/FM" button to

switch on the radio.

Turn the "TUNE" dial re- Stations can only be stored automati-

spectively to the left to cally on wavebands FM3, MW and LW.

search the lower frequen-

cies or to the right to search

the higher frequencies.

Storing new stations replaces the previous

stations.

This storing can be activated automatically

irrespective of the waveband selected.

Selecting the waveband

Manual station storing

Press the "AM/FM" button

for more than two seconds.

Press the "AM/FM" button

several times in succession

to select the waveband; it

changes in the following

order: FM1/FM2/FM3/MW/

LW/FM1...

You can store up to six stations on each

waveband.

Storing a new station replaces the pre-

vious station.

The six stations offering the best recep-

tion are stored and classiﬁed from the

weakest to the strongest on the six cor-

responding buttons.

Automatic station search

Press one of the six buttons "1" to "6"

until an audible signal is heard.

Recalling stored stations

Press the "SEEK ꢀ" or

"SEEK ꢁ" button to search

the lower frequencies or the

higher frequencies respec-

tively.

The sound cuts out then becomes au-

dible again when the station has been

stored.

The number of the button and the as-

sociated radio frequency appear on the

screen.

11

Press one of the six buttons "1" to "6".

The station corresponding to the wave-

band selected appears on the screen.

The search begins automatically and

stops at the ﬁrst station found.

To recall the pre-set stored set-

ting, press the button and release

it within two seconds.

Disconnecting the battery terminals

clears the stored radio stations.

AUDIO EQUIPMENT and TELEMATICS

"RDS"

The "Radio Data System" (RDS) func-

tion on the FM waveband permits:

Alternative frequencies "AF"

Your radio automatically checks and

selects the best frequency for the radio

station to which it is tuned (if the station

broadcasts on several transmitters or

frequencies).

The frequency of a radio station covers

approximately 30 miles (50 km). The

change from one frequency to another

explains the temporary loss of recep-

tion during a journey.

If the station to which you are listening

does not have several frequencies in

the region in which you are currently lo-

cated, you can deactivate the alternative

frequency following.

Regional following mode "REG"

Some stations are organised in a net-

work.

Traffic information "TP"

The "Trafﬁc Program" (TP) function per-

mits automatic and temporary switc-hing

to an FM station broadcasting trafﬁc infor-

mation.

The radio station or the source that you

are listening to at this point is paused.

Once the trafﬁc information has ended,

the system switches back to the radio

station or the source that you were lis-

tening to initially.

-

access to the display of information,

such as the name of the station, ...

tuning to the same station while

travelling through different regions,

temporary tuning to trafﬁc informa-

tion announcements.

Most FM stations use RDS. These stations

transmit non-audible data in addition to

their programmes.

The data transmitted in this way allows

you access to various functions, mainly

displaying of the name of the station,

automatic station following or temporary

tuning to trafﬁc information announce-

ments.

The RDS allows you to continue liste-

ning to the same station by means of

the alternative frequency following.

However, in certain conditions, this

RDS frequency following cannot be

provided throughout the country. Radio

stations do not cover the whole country,

which explains the loss of reception of

the station during a journey.

Press the "TP" button.

"TP" appears on the display.

If the station is compatible,

"RDS" also appears.

In different regions, they broadcast diffe-

rent or shared programmes depending on

the time of day.

If the radio detects trafﬁc information,

"TRAF INF" appears on the display, fol-

lowed by the frequency of the broadcasting

station, then its name.

The volume is different from that of the

previous source.

Following the broadcasting of the trafﬁc

information, the volume returns to that

of the source prior to the interruption.

You can follow:

-

a regional station only,

the entire network, with the possibility

that you will be listening to a different

programme.

11

On long distance journeys, when

the stored station becomes

weak, the radio searches ﬁrst for

another frequency for the same

station (AF). Then, if this fails, it

searches for a frequency broad-

casting the regional programme

(REG). If this also fails, the radio

returns to the stored station.

The "AF", "REG" and "TP"

functions can be deacti-

vated or activated via the

"TUNE" button functions

setting mode.

When "TP" appears on the dis-

play, the radio stops solely at

RDS stations broadcasting trafﬁc

information.

AUDIO EQUIPMENT and TELEMATICS

Search for a "PTY" broadcast

Emergency broadcasts

"ALERT"

Press the "PTY" button.

An emergency broadcast automatically

and temporarily interrupts the FM station

or the source that you are listening to.

The message "ALERT" appears on the

display and the volume is different from

that of the previous source.

Following the emergency broadcast,

the message disappears and the vol-

ume returns to that of the source prior

to the interruption.

Turn the "TUNE" dial to se-

lect the type of programme

required.

The sound cuts out then becomes au-

dible again when the programme has

been stored.

The number of the button and the associat-

ed PTY programme appear on the display.

Two seconds later, the radio searches

for a broadcast which corresponds to

your selection; the type of PTY selected

ﬂashes on the display.

Once the station has been found, its

name appears on the display.

To recall the pre-set memory

setting, press the button and re-

lease it within two seconds.

You can press the "SEEK ꢀ" or "SEEK ꢁ"

buttons to ﬁnd another station.

Themed type of programme

"PTY"

Changing the display language of

the "PTY" programme

If no station is found corre-

sponding to your selected type

of programme, "NONE" appears

on the display for ﬁve seconds

and the radio returns to the pre-

vious station.

Some stations offer the option of liste-

ning to a themed type of programme as

a priority, selected from the list avail-

able below:

NEWS, AFFAIRS, INFO, SPORT, EDUCATE,

DRAMA, CULTURE, SCIENCE, VARIED, POP M,

ROCK M, EASY M, LIGHT M, CLASSICS,

OTHER M, WEATHER, FINANCE, CHILDREN,

SOCIAL, RELIGION, PHONE IN, TRAVEL,

LEISURE, JAZZ, COUNTRY, NATION M

OLDIES, FOLK M, DOCUMENT.

Press the "TUNE" button for

more than two seconds to

access the functions setting

mode.

Storing a "PTY" programme

You can store up to six PTY programmes.

Each new programme stored replaces

the previous one.

Then, press this button several times in

succession; the functions setting mode

changes in the following order:

AF/CT/REG/TP-S/PTY (languages)/SCV/

PHONE/OFF.

,

11

Turn the "TUNE" dial to the left or to the

right to select the language (ENGLISH,

FRANCAIS, DEUTSCH, SVENSK,

ESPAGNOL, ITALIANO).

Turn the "TUNE" dial to set

the PTY programme to be

stored.

Press one of the six but-

tons "1" to "6" for more than

two seconds.

AUDIO EQUIPMENT and TELEMATICS

Functions setting mode

CD PLAYER

This can play audio CDs (CD-DA, CD-

Text, CD-R/RW) or MP3 CDs.

Audio CDs

Fast search

This permits activation or deactivation

of the functions below.

Press the "TUNE" button for

more than two seconds to

access the functions setting

mode.

Then, press this button

several times in succession;

Selecting CD mode

Press and hold button "ꢂ"

or "ꢃ" to carry out a fast

backwards or forwards

search respectively.

After inserting a disc, printed face up-

wards, the player starts automatically.

Play begins when the button is re-

leased.

the functions setting mode changes in

the following order:

AF/CT/REG/TO-S/PTY (languages)/SCV/

PHONE/OFF.

If the player already con-

tains a disc, press the "CD"

button.

Selecting a track

"CD", the track number and the playing

time appear on the screen.

Turn the "TUNE" dial respectively to the

left to deactivate the function ("OFF") or

to the right to activate it ("ON").

Press button "ꢀ" or "ꢁ" to

select the previous or next

track respectively.

Insert circular compact discs

only.

8 cm compact discs must be in-

serted in the centre of the player

slot.

Repeating a track

Press the "RPT" button to

repeat the play of the cur-

rent track. "RPT" appears

on the screen.

The "PHONE" is not operational

at present.

The functions setting mode is

deactivated after approximately

10 seconds without any action.

Ejecting a disc

To exit this mode, press this button

again.

Press this button to remove

the disc from the player.

The system automatically

switches to radio mode.

11

Random playing of a disc

Press the "RDM" button

to start random play of the

tracks on the disc. "RDM"

appears on the screen.

Once ejected, if the compact

disc is not removed within ﬁf-

teen seconds, it is reloaded into

the player.

To exit this mode, press this button

again.

AUDIO EQUIPMENT and TELEMATICS

CD-TEXT DISPLAY

MP3/TAG ID3 CD

Playing the beginning of each track

The CD player and the CD changer are The CD player and the CD changer

compatible with the display of CD-Text are compatible with the playing of MP3

Press the "SCAN" button to

start playback of the ﬁrst ten

seconds of each track on

the disc. "SCAN" appears

on the screen and the corresponding

track number ﬂashes.

information.

ﬁles.

These must be recorded in ISO9660

Level 1/Level 2, Joliet or Romeo format

on CD ROMs, CD-Rs or CD-RWs. The

CDs can contain a maximum of 255 ﬁles

and 100 folders on 16 levels.

Press the "DISP" button

several times in succession;

the CD-Text information ap-

pears in the following order:

To exit this mode, press this button

again.

DISC NAME/TRACK NAME/NORMAL

DISPLAY MODE.

The Tag ID3 version 1 can be displayed

while playing MP3 ﬁles.

If the information exceeds

12 characters, press the

"PAGE" button to see the

rest.

On CD-R/RWs, the quality of the

playback sound depends on the

encoding software, the burning

device and the burning speed

used.

In the case of compact discs

containing both CD-DAand MP3

ﬁles, play automatically begins

with the CD-DA ﬁles.

To switch play between the two

types of ﬁle, press the "CD" but-

ton for more than two seconds

until an audible signal is heard.

In the absence of CD-Text information

to be displayed, "NOTITLE" appears on

the screen.

While using these compact

discs, the "Repeat", Random

play" and "Playing of the begin-

ning of the tracks" functions are

only applied to ﬁles of the same

format.

Selecting an MP3 folder

11

Turn the "FOLDER" dial

respectively to the right to

select a folder in ascending

order or to the left to select a

folder in descending order.

AUDIO EQUIPMENT and TELEMATICS

Repeating the tracks in a folder

Playing the beginning of each track

To deactivate this information, press

the "DISP" button again for more than

two seconds.

Press the "SCAN" button

to start playing the ﬁrst ten

seconds of each track in

Press the "RPT" button for

more than two seconds to re-

peat the playing of the tracks

contained in the current folder.

"D-RPT" appears in the screen.

To exit this mode, press this button

again.

all of the folders. "SCAN"

If the information exceeds

12 characters, press the

"PAGE" button to see the

rest.

appears in the screen and the corre-

sponding track number ﬂashes.

To exit this mode, press this button

again.

In the absence of MP3 or Tag ID3 in-

formation to be displayed, "NOTITLE"

appears in the screen.

Random playing of a folder

MP3/Tag ID3 display

Press the "RDM" button to When play begins, "READING" appears

start random playing of the in the screen then disappears to make

tracks in the current folder. way for the folder number, the track

"RDM" appears in the screen. number, the playing time and "MP3".

On CD-R/RWs, the quality of the

playing sound depends on the

encoding software, the burning

device and the burning speed

used.

Depending on the ﬂow chart of

the MP3 folders and ﬁles on the

disc, play may not begin imme-

diately.

To exit this mode, press this button

again.

Press the "DISP" button sev-

eral times in succession; the

MP3 information appears in

the following order:

Random playing of a disc

FOLDER NAME/TRACK NAME/NORMAL

DISPLAY MODE.

Press the "RDM" button for

more than two seconds to

start random playing of the

tracks in all of the folders.

Press the "DISP" button for

more than two seconds to

activate the Tag ID3 infor-

mation. "TAG" appears in

the screen.

11

"D-RDM" appears in the screen.

To exit this mode, press this button

again.

Press the "DISP" button several times

in succession; the Tag ID3 information

appears in the following order:

ALBUM NAME/TRACK NAME/ARTIST

NAME/NORMAL DISPLAY MODE.

AUDIO EQUIPMENT and TELEMATICS -> Audio CD system for Your Peugeot 4007 4 Door 2012-2017

Related Topics

AUDIO EQUIPMENT and TELEMATICS

Popular Owner Manuals

Latest Owner Manuals