CHILD SAFETY
These are three rings for each seat:
This ISOFIX mounting system provides
fast, reliable and safe fitting of the child
seat in your vehicle.
The ISOFIX child seats are fitted with
two latches which are secured easily on
the two rings A.
"ISOFIX" mountings
Your vehicle has been approved in
accordance with the new ISOFIX regu-
lation.
The seats, represented below, are fitted
with regulation ISOFIX mountings:
Some also have an upper strap which
is attached to the ring B.
To attach this strap, remove the vehicle
seat's head restraint. Then fix the hook
on the ring B and tighten the upper
strap.
5
-
two rings A, located between the
vehicle seat back and cushion, indi-
cated by a label,
The incorrect installation of a
child seat in a vehicle compro-
mises the child's protection in
the event of an accident.
For information regarding the
ISOFIX child seats which can be
installed in your vehicle, refer to
the table showing the locations
for ISOFIX child seats.
-
a ring B, used to fix the upper strap,
referred to as the TOP TETHER, in-
dicated by a label.
English 