Advertisement

Advertisement

SAFETY -> Trajectory control systems for Your Peugeot 4007 4 Door 2012-2017

SAFETY  
Deactivation  
Reactivation  
In exceptional conditions (starting a These systems are not reactivated au-  
vehicle which is bogged down, stuck tomatically above 30 mph (50 km/h).  
SYSTEMS  
Associated systems which guarantee  
the directional stability of the vehicle  
within the limits of the laws of physics:  
in snow, on soft ground, ...), it may be  
) Press the "ASC OFF" button again  
better to deactivate the ASC system, so  
to reactivate them manually.  
that the wheels can move freely and re-  
Switching off of the symbol in the top  
gain grip.  
-
-
traction control (TCL),  
automatic stability control (ASC).  
right corner of the instrument panel  
screen indicates the reactivation of the  
ASC and TCL systems.  
Operating fault  
Traction control and automatic  
stability control  
The display of this message  
in the instrument panel screen  
indicates a malfunction of these  
systems.  
Traction control optimises traction to  
prevent wheel spin, by acting on the  
brakes of the driving wheels and on the  
engine.  
Automatic stability control acts on the  
brake of one or more wheels and on the  
engine to keep the vehicle on the tra-  
jectory required by the driver.  
Contact  
a
PEUGEOT  
dealer or a qualied workshop to have  
the ASC/TCL systems checked.  
) Press the "ASC OFF" button, locat-  
ed to the right of the steering wheel,  
until the ASC OFF symbol appears  
in the instrument panel screen.  
The ASC/TCL systems offer ex-  
ceptional safety in normal driving,  
but this should not encourage the  
driver to take extra risks or drive at  
high speed.  
The correct functioning of these  
systems depends on observa-  
tion of the manufacturer’s rec-  
ommendations on:  
Activation  
These systems are activated automati-  
cally each time the vehicle is started.  
They operate when the vehicle speed is  
higher than 10 mph (15 km/h).  
-
-
-
-
wheels (tyres and rims),  
braking components  
electronic components,  
assembly and repair proce-  
dures.  
They come into operation in  
the event of a grip or trajectory  
problem.  
This is indicated by ashing  
of this symbol on the instrument panel  
screen.  
After an impact, have these sys-  
tems checked by a PEUGEOT  
dealer or a qualied workshop.  
The display of this symbol in the top  
right corner of the instrument panel  
screen indicates that the ASC and TCL  
systems are deactivated.