106
YOUR 406 IN DETAIL
Setting
Switch the ignition off and get out of
the vehicle.
Disarming
Unlock the vehicle using the remote
control key, (the direction indicators
flash for two seconds and the red
light on the switch goes out).
Note: if the red warning light flashes,
it is a sign that the alarm has been
triggered during your absence.
To stop it, switch on the ignition.
Note: when the alarm is set, but the
remote control no longer works:
Set the alarm within five minutes fol-
lowing your exit from the vehicle by
locking using the remote control (the
red light on the switch, visible from
the outside, flashes every second
and the direction indicators come on
permanently for two seconds).
5 seconds later, internal protection is
set.
• unlock the doors using the key and
open the door; the alarm is trig-
gered;
• switch the ignition on within ten
seconds;
• press the internal protection button
1 immediately. The alarm is dis-
armed.
45 seconds later, external protection
is set.
When the alarm is triggered, the
siren sounds for thirty seconds.
After it has been triggered, the alarm
is operational again.
THE ALARM SYSTEM*
This offers two types of protection:
• external, it sounds if a door, the
bonnet or the boot is opened.
• internal, it sounds if there is air
movement in the passenger
compartment (a broken window
or movement inside the vehicle).
Note: if you wish to lock your vehicle
without setting the alarm, lock it
using the key in the lock.
Warning
Note: it also has an anti-tamper
function; if there is an attempt to tam-
per with the wires to the siren, the
control unit or the battery, the siren
sounds and the direction indicators
light.
When the alarm is triggered, if a door,
the boot or the bonnet are not closed
correctly, the siren sounds for a
moment. Close the vehicle correctly
to set the alarm.
* According to destination.
17-02-2003
English 
