In the event of a breakdown -> Fuses for Your Peugeot 408 4 Door Second Generation (2022-2026)

In the event of a breakdown  
Model with Full LED 3D lamps  
For the reversing lamp: pull out the bulb and  
replace it.  
PEUGEOT accepts no responsibility  
10  
for the cost incurred in repairing the  
vehicle or for rectifying malfunctions resulting  
from the installation of accessories not  
supplied or not recommended by PEUGEOT  
and not installed in accordance with its  
recommendations, in particular when the  
combined power consumption of all of the  
additional equipment connected exceeds 10  
milliamperes.  
Refitting the lamp units  
Perform the operations in the reverse  
order to dismantling.  
When changing the bulb within a few  
minutes of switching off the ignition, take  
care not to touch the exhaust - risk of burns!  
12 V battery/Accessory  
batteries  
Fuses  
1. Direction indicators (LED)  
2. Brake lamps/sidelamps (LED)  
3. Sidelamps (LED)  
4. Foglamps (P21W)  
5. Reversing lamps (W16W)  
Changing a fuse  
All work must be carried out only  
by a PEUGEOT dealer or a qualified  
workshop.The replacement of a fuse by a  
third party could cause a serious malfunction  
of the vehicle.  
Lead-acid starter batteries  
These batteries contain harmful  
substances (sulphuric acid and lead).  
They must be disposed of in accordance  
with regulations and must never under any  
circumstances be discarded with household  
waste.  
Reversing lamps/Foglamps  
Installing electrical accessories  
The vehicle's electrical system is designed  
to operate with standard or optional  
equipment.  
Before fitting other electrical equipment  
or accessories to your vehicle, contact a  
PEUGEOT dealer or a qualified workshop.  
Dispose of used batteries at a designated  
collection point.  
Protect your eyes and face before  
handling the battery.  
All operations on the battery must be carried  
out in a well ventilated area and away from  
naked flames and sources of sparks, to avoid  
any risk of explosion or fire.  
These bulbs are replaced from outside the rear  
bumper.  
Remove the fixing screw(s) from the access  
flap located under the bumper using a Torx  
screwdriver or 10 mm hexagonal socket.  
Wash your hands afterwards.  
Unclip the access flap.  
Turn the bulb holder a quarter turn and  
remove it.  
For the foglamp: turn the bulb a quarter turn  
and replace it.  
185