2009-2016 Peugeot 5008 SUV Audio equipment and telematics -> Peugeot Connect Sound (RD5) User Manual

MY CAR USER MANUAL

Audio equipment and telematics -> Peugeot Connect Sound (RD5) for Your Peugeot 5008 SUV First Generation (2009-2016)

PEUGEOT Connect Sound  
(RD5)  
AUDIO SYSTEM / BLUETOOTH®  
CONTENTS  
Your PEUGEOT Connect Sound (RD5) is coded in such  
a way that it will only operate in your vehicle.  
p.  
376  
377  
378  
379  
382  
385  
388  
393  
01 First steps  
02 Steering mounted controls  
03 Main menu  
04 Audio  
05 PEUGEOT Connect USB  
06 Bluetooth  
p.  
p.  
p.  
p.  
p.  
p.  
p.  
07 Screen menu map(s)  
Frequently asked questions  
For safety reasons, the driver must only carry out  
operations which require prolonged attention while the  
vehicle is stationary.  
When the engine is switched off and to prevent  
discharging of the battery, the audio equipment may  
switch off after a few minutes.  
375  
01 FIRST STEPS  
Display the list of  
local stations.  
Long press: CD  
tracks or MP3  
folders (CD / USB).  
Audio settings: front/  
rear fader, left/right  
balance, bass/treble,  
loudness, audio  
Select source:  
radio, audio CD / MP3 CD, USB,  
Jack connection, Streaming,  
AUX.  
Selection of AM / FM  
wavebands.  
Abandon the current  
operation.  
ambiences.  
TA (Traffic Announcements)  
on/off.  
Long press: PTY* (radio  
Programme TYpe) mode.  
Eject CD.  
Select the screen display  
mode:  
Automatic frequency search  
down/up.  
Date, audio functions, trip  
computer, telephone.  
Select previous/next CD, MP3  
or USB track.  
Confirm.  
On/off, volume setting.  
The DARK button changes the screen display  
for improved driving comfort at night.  
Buttons 1 to 6:  
Select a pre-set radio station.  
Long press: pre-set a station.  
Display main menu.  
Select next frequency down/up.  
Select previous/next MP3 folder.  
Select previous/next folder / genre /  
artist / playlist (USB).  
1st press: upper bar only illuminated.  
2nd press: black screen.  
3rd press: return to standard display.  
* Available according to version.  
376  
02 STEERING MOUNTED CONTROLS  
Radio: automatic search for a higher frequency.  
CD / MP3 / USB: selection of the next track.  
CD / USB: continuous press: fast forwards play.  
Move in the list.  
Change audio source.  
Confirm a selection.  
Call/end call on the telephone.  
Press for more than 2 seconds:  
telephone main menu.  
Radio: automatic search for a lower  
frequency.  
CD / MP3 / USB: selection of the  
previous track.  
CD / USB: continuous press: fast  
reverse.  
Move in the list.  
Radio: select the previous/next pre-set  
station.  
USB: select genre / artist / folder from the  
classification list.  
Select the previous/next item in a menu.  
Volume increase.  
Mute: press the volume  
increase and decrease  
buttons simultaneously.  
The sound is restored by  
pressing one of the  
two volume buttons.  
Volume decrease.  
377  
03 MAIN MENU  
TELEPHONE:  
Bluetooth hands-free,  
pairing, management  
of a call.  
AUDIO FUNCTIONS:  
radio, CD, USB, options.  
Screen C  
TRIP COMPUTER: entering  
of distances, alerts, status of  
functions.  
PERSONALISATION-  
CONFIGURATION:  
vehicle parameters,  
display, languages.  
Screen A  
For a detailed global view of the  
menus available, refer to the  
"Screen menu map" section.  
378  
The external environment (hills, buildings, tunnels, basement car parks, ...)  
may block reception, including in RDS mode. This is a normal effect of the  
way in which radio waves are transmitted and does not indicate any failure  
of the audio system.  
04 AUDIO  
Radio  
RDS  
Selecting a station  
Press the SOURCE button several  
times in succession and select the  
radio.  
Press the MENU button.  
Select AUDIO FUNCTIONS then  
press OK.  
Press the BAND AST button to select  
a waveband: FM1, FM2, FMast, AM.  
Select the FM WAVEBAND  
PREFERENCES function then  
press OK.  
Briefly press one of the buttons to  
carry out an automatic search of the  
radio stations.  
Select ACTIVATE RDS then press  
OK. RDS appears on the screen.  
Press one of the buttons to carry out  
a manual search up / down for radio  
frequencies.  
In radio mode, press OK directly to activate / deactivate  
RDS mode.  
Press the LIST REFRESH button to  
display the list of stations received  
locally (30 stations maximum).  
To update this list, press for more  
than two seconds.  
The RDS, if displayed, enables you to continue listening to the same  
station by automatic retuning to alternative frequencies. However, in certain  
conditions, coverage of an RDS station may not be assured throughout the  
country as radio stations do not cover 100 % of the territory. Under conditions  
of very weak reception, the system may change to a regional station.  
379  
04 AUDIO  
CD  
Receiving TA messages  
Playing a CD  
The TA (Traffic Announcement) function gives priority to TA alert  
messages. To operate, this function needs good reception of a  
radio station transmitting this type of message. When a traffic  
report is transmitted, the current audio source (Radio, CD, ...) is  
interrupted automatically to play the TA message. Normal playback  
of the audio source resumes at the end of the transmission of  
the message.  
Insert circular compact discs only.  
Some anti-pirating systems, on original discs or CDs copied using a  
personal recorder, may cause faults which are no reflection on the  
quality of the vehicle's player.  
Without pressing the EJECT button, insert a CD in the player, play  
begins automatically.  
To play a disc which has already been  
inserted, press the SOURCE button  
several times in succession and  
select CD.  
Press the TA button to activate or  
deactivate traffic messages.  
Press one of the buttons to select a  
track on the CD.  
Press the LIST REFRESH button to display the list of tracks  
on the CD.  
Press and hold one of the buttons for  
fast forwards or fast backwards.  
380  
04 AUDIO  
MP3 CD  
Playing an MP3 compilation  
MP3 CD  
Information and advice  
Insert an MP3 compilation in the player.  
The MP3 format, an abbreviation of MPEG 1.2 & 2.5 Audio Layer 3,  
is an audio compression standard which permits the recording of  
several tens of music files on a single disc.  
The audio equipment searches for all of the music tracks, which  
may take anything between a few seconds and several tens of  
seconds, before play begins.  
On a single disc, the CD player can read up to 255 MP3 files  
spread over 8 folder levels. However, it is advisable to keep to  
a limit of two levels to reduce the access time before the CD is  
played.  
In order to be able to play a recorded CDR or CDRW, when  
recording, the ISO 9660 level 1.2 or Joliet file format is  
recommended.  
While the CD is being played, the folder structure is not followed.  
All of the files are displayed on a single level.  
If the disc is recorded in another format, it may not be played  
correctly.  
It is recommended that the same recording format is always used  
for an individual disc, with as low a speed as possible  
(4x maximum) for optimum sound quality.  
In the particular case of a multi-session CD, the Joliet format is  
recommended.  
To play a disc which has already  
been inserted, press the SOURCE  
button several times in succession  
and select CD.  
Press one of the buttons to select a  
folder on the CD.  
The audio system will only play files with the extension ".mp3" with  
a sampling rate of 22.05 KHz or 44.1 KHz. No other type of file  
(.wma, .mp4, .m3u...) can be played.  
Press one of the buttons to select a  
track on the CD.  
Press the LIST REFRESH button to display the list of directories of  
the MP3 compilation.  
It is advisable to restrict file names to 20 characters without using  
special characters (e.g. " ? ; ù) to avoid any playing or displaying  
problems.  
Press and hold one of the buttons for  
fast forward or backward play.  
Empty CDs are not recognised and may damage the system.  
381  
05 PEUGEOT CONNECT USB  
Using the PEUGEOT CONNECT USB  
Connecting a USB memory stick  
Connect the memory stick to the port, directly or  
This unit consists of a USB port and an auxiliary  
Jack socket*. The audio files are transmitted  
from a portable device - digital player or a USB  
memory stick - to your PEUGEOT Connect  
Sound (RD5) and heard via the vehicle's  
speakers.  
using a lead. If the audio equipment is switched  
on, the USB source is detected as soon as it  
is connected. Play begins automatically after a  
delay which depends on the capacity of the USB  
memory stick.  
The file formats supported are .mp3 (mpeg1  
layer 3 only) and .wma (standard 9 only,  
128 kbits/sec compression).  
USB memory stick (1.1, 1.2 and 2.0) or Apple®  
Certain playlist formats are supported (.m3u, ...)  
player of generation 5 or later:  
On reconnection of the previous memory stick  
used, play is resumed automatically with the last  
track played.  
-
USB memory sticks should be formatted  
FAT or FAT 32 (NTFS not supported),  
-
the Apple® player lead is essential,  
-
navigation through the file database is also  
possible by means of the steering mounted  
controls.  
The system puts together playlists (temporary memory) created  
over a period which depends on the capacity of the USB device.  
The other sources are available during this time.  
The playlists are updated each time the ignition is switched off or  
each time a USB memory stick is connected.  
When connecting for the first time, the classification suggested  
is by folder. When you reconnect, the classification selected  
previously is retained.  
Other Apple® players of earlier generations and  
players using the MTP protocol*:  
-
play via Jack-Jack lead only (not supplied),  
-
navigation through the file database is from  
the portable device.  
* According to vehicle.  
382  
05 PEUGEOT CONNECT USB  
Using the PEUGEOT CONNECT USB  
Press one of these buttons to gain  
access to the previous / next track on  
the classification list currently being  
played.  
Press and hold one of the buttons for  
fast forward or backward play.  
Press and hold LIST to display the  
different classifications.  
Select by Folder / Artist / Genre / Playlist,  
press OK to select the classification  
required, then press OK again to confirm.  
Press one of these buttons to  
gain access to the previous / next  
Genre, Folder, Artist or Playlist on  
the classification list currently being  
played.  
-
-
by Folder: all folders containing audio  
files recognised on the peripheral  
device.  
by Artist: all of the artist names  
defined in the ID3 Tags, classified in  
alphabetical order.  
-
by Genre: all of the genres defined in  
the ID3 Tags.  
Connecting an Apple® player via the USB port  
-
by Playlist: in accordance with the  
playlists recorded on the USB device.  
The lists available are Artist, Genre and Playlist (as defined in the  
Apple® player).  
Selection and Navigation are described in steps 1 to 4 above.  
Press LIST briefly to display the  
previously selected classification.  
Navigate through the list using the left/  
right and up/down buttons.  
Confirm the selection by pressing OK.  
Do not connect a hard disk or USB connection device other  
than audio equipment to the USB port. This could damage your  
installation.  
383  
05 PEUGEOT CONNECT USB  
Using the auxiliary input (AUX)  
Adjusting the volume of the auxiliary  
source  
JACK socket or USB port (according to vehicle)  
The auxiliary input, JACK or USB, allows the connection of a  
portable device (MP3 player...).  
First adjust the volume of your portable device.  
Do not connect a device to both the JACK socket and the USB  
port at the same time.  
Connect the portable device  
(MP3 player…) to the JACK  
socket or to the USB port,  
using a suitable cable (not  
supplied).  
Then adjust the volume of your audio  
system.  
The display and control is via the portable device.  
Press the SOURCE button several  
times in succession and select AUX.  
384  
06 BLUETOOTH  
The services offered depend on the network, the SIM card and the  
compatibility of the Bluetooth equipment used.  
Consult your telephone's manual and your operator to find out which  
services are available to you.  
Bluetooth telephone  
Screen C  
(Available according to model and version)  
Pairing a telephone / First connection  
The first 4 telephones recognised are displayed in this window.  
For safety reasons and because they require prolonged attention  
on the part of the driver, the operations for pairing of the Bluetooth  
mobile telephone with the Bluetooth hands-free system of your  
audio equipment must be carried out with the vehicle stationary  
and the ignition on.  
The TELEPHONE menu permits access to the following functions  
in particular: Directory*, Call list, Pairing management.  
* If your telephone is fully compatible.  
Select the telephone to be connected from the list. Only one  
telephone can be connected at a time.  
Go to www.peugeot.co.uk for more information (compatibility,  
more help, ...).  
Activate the telephone's Bluetooth function  
and ensure that it is "visible to all" (telephone  
configuration).  
A virtual keypad is displayed in the  
screen: enter a code with at least 4 digits.  
Confirm by pressing OK.  
A message is displayed in the screen of the  
Press the MENU button.  
In the menu, select:  
telephone chosen. To accept the pairing, enter the  
same code on the telephone, then confirm with OK.  
If pairing fails, the number of attempts is not limited.  
-
Bluetooth telephone function -  
Audio  
A message that the pairing has been successful appears in the screen.  
-
Bluetooth configuration  
-
Perform a Bluetooth search  
The automatic connection authorised is only active after the  
telephone has been configured.  
The directory and the call list can be accessed after the  
synchronisation period.  
A window is displayed with a message that a search is in progress.  
385  
06  
BLUETOOTH  
Receiving a call  
Making a call  
An incoming call is announced by a ring and a superimposed  
display in the vehicle's screen.  
From the Bluetooth telephone function Audio menu, select Manage  
the telephone call then Call, Call list or Directory.  
Press this button for more than two seconds for  
access to your directory, then navigate with the  
thumb wheel.  
Select the YES tab on the display  
using the buttons and confirm by  
pressing OK.  
Or  
To dial a number, use your telephone's keypad,  
with the vehicle stationary.  
Press this button to accept the call.  
The system accesses the telephone's contacts directory, depending  
on compatibility, and while the Bluetooth connection with it is  
maintained.  
With certain telephones connected by Bluetooth you can send a  
contact to the directory of the audio system.  
Contacts imported in this way are saved in a permanent directory  
visible to all, whatever the telephone connected.  
The menu for the directory is not accessible if it is empty.  
386  
06  
BLUETOOTH  
Bluetooth audio streaming*  
Wireless transmission of music files on the telephone, played via  
the audio equipment. The telephone must be able to manage the  
appropriate Bluetooth profiles (Profiles A2DP / AVRCP).  
Ending a call  
Initiate the pairing between the telephone and  
the vehicle. This pairing can be initiated from  
the vehicle's telephone function menu or via the  
telephone's keypad. Refer to the steps in "Pairing  
a telephone" on the previous pages. During the  
pairing phase, the vehicle must be stationary with  
the key in the ignition.  
During a call, press this button for more than  
2 seconds.  
Confirm with OK to end the call.  
Select the telephone to be connected from the telephone function menu.  
The audio system connects to a newly paired telephone automatically.  
Activate the streaming source by  
pressing the SOURCE button**.  
The tracks to be played can be  
controlled as usual via the buttons on  
the audio system control panel and  
the steering mounted controls***.  
The contextual information can be  
displayed on the screen.  
* Depending on the compatibility of the telephone.  
** In certain cases, playing of the Audio files must be initiated from  
the keypad.  
*** If the telephone supports the function.  
387  
07 SCREEN MENU MAP(S)  
Screen A  
MAIN FUNCTION  
Radio-CD  
Options  
1
1
Option A  
1
RDS options  
Diagnostic  
View  
Option A1  
2
2
2
REG mode  
Option A11  
2
3
3
3
CD repeat  
Abandon  
2
Option B...  
1
Shuffle play  
2
Vehicle config*  
1
R wiper in rev  
2
Guide lighting  
2
* The settings vary according to vehicle.  
388  
07  
SCREEN MENU MAP(S)  
Display adjust  
Language  
Units  
1
1
1
Year  
Français  
Italiano  
Temperature: °Celsius / °Fahrenheit  
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
Fuel consumption:  
KM/L - L/100 - MPG  
Month  
Day  
Nederlands  
Portuguès  
Portuguès-Brazil  
Deutsch  
Hour  
Minutes  
12 H/24 H mode  
English  
Español  
Cestina  
Hrvatski  
Magyar  
389  
07  
SCREEN MENU MAP(S)  
Press the OK dial for access to short-cut menus according  
to the display on the screen:  
Screen C  
CD / MP3 CD  
USB  
RADIO  
activate / deactivate Intro  
activate / deactivate track repeat (of the  
current folder / artist / genre / playlist)  
activate / deactivate RDS  
1
1
1
1
1
activate / deactivate track repeat  
(the entire current CD for CD, the entire  
current folder for MP3 CD)  
activate / deactivate REG mode  
activate / deactivate radiotext  
1
activate / deactivate random play (of the  
current folder / artist / genre / playlist)  
activate / deactivate random play  
(the entire current CD for CD, the entire  
current folder for MP3 CD)  
1
1
390  
07  
SCREEN MENU MAP(S)  
Pressing the MENU button displays:  
Screen C  
Audio functions  
Trip computer  
1
1
FM preferences  
Enter distance to destination  
Distance: x miles  
2
2
2
2
Alternative frequencies (RDS)  
3
3
3
3
3
3
activate / deactivate  
Alert log  
4
Regional mode (REG)  
Diagnostics  
activate / deactivate  
State of systems*  
Systems activated or deactivated  
4
Radio-text information (RDTXT)  
activate / deactivate  
4
Play modes  
2
Album repeat (RPT)  
3
activate / deactivate  
Track random play (RDM)  
activate / deactivate  
4
4
3
* The settings vary according to vehicle.  
391  
07  
SCREEN MENU MAP(S)  
Personalisation-Configuration  
Bluetooth telephone  
1
1
Define vehicle settings*  
Display configuration  
Video-brightness adjustment  
normal video  
Bluetooth configuration  
Connect/Disconnect an equipment  
Telephone function  
2
2
2
3
3
3
3
Audio Streaming function  
Consult the paired equipment  
4
inverse video  
4
4
brightness (- +) adjustment  
Setting the date and time  
setting day/month/year  
hour/minute adjustment  
choice of 12 h / 24 h mode  
Choice of units  
4
Delete a paired equipment  
Perform a Bluetooth search  
4
4
3
4
4
4
Call  
2
Calls list  
Directory  
3
4
3
Manage the telephone call  
Terminate the current call  
Activate secret mode  
2
l/100 km - mpg - km/l  
°Celsius / °Fahrenheit  
4
4
3
3
Choice of language  
2
* The settings vary according to vehicle.  
392  
FREQUENTLY ASKED QUESTIONS  
QUESTION  
ANSWER  
SOLUTION  
There is a difference in  
sound quality between  
the different audio  
For optimum sound quality, the audio settings (Volume, Bass, Treble,  
Ambience, Loudness) can be adapted to the different sound sources,  
which may result in audible differences when changing source (radio,  
CD...).  
Check that the audio settings (Volume, Bass,  
Treble, Ambience, Loudness) are adapted to  
the sources listened to. It is advisable to set  
the AUDIO functions (Bass, Treble, Front-Rear  
Balance, Left-Right Balance) to the middle  
position, select the musical ambience "None" and  
set the loudness correction to the "Active" position  
in CD mode or to the "Inactive" position in radio  
mode.  
sources (radio, CD...).  
The CD is ejected  
automatically or is not  
played by the player.  
The CD is inserted upside down, is unplayable, does not contain any  
audio data or contains an audio format which the player cannot play.  
The CD is protected by an anti-pirating protection system which is not  
recognised by the audio equipment.  
-
-
-
-
-
Check that the CD is inserted in the player the  
right way up.  
Check the condition of the CD: the CD cannot  
be played if it is too damaged.  
Check the content in the case of a recorded  
CD: consult the advice in the "Audio" section.  
The audio equipment's CD player does not  
play DVDs.  
Due to their quality level, certain writeable  
CDs will not be played by the audio system.  
The message "USB  
peripheral error" is  
The battery of the peripheral may not be sufficiently charged.  
Recharge the battery of the peripheral device.  
Reformat the memory stick.  
displayed on the screen.  
The Bluetooth connection  
is cut.  
The USB memory stick is not recognised.  
The memory stick may be corrupt.  
393  
FREQUENTLY ASKED QUESTIONS  
QUESTION  
ANSWER  
SOLUTION  
I am unable to access my Few telephones or service providers allow the use of this function.  
voicemail.  
The CD player sound is  
poor.  
The CD used is scratched or of poor quality.  
Insert good quality CDs and store them in suitable  
conditions.  
The audio equipment settings (bass, treble, ambiences) are unsuitable.  
An incorrect waveband is selected.  
Set the treble or bass level to 0, without selecting  
an ambience.  
The stored stations do  
not function (no sound,  
87.5 Mhz is displayed...).  
Press the BAND AST button to return to the  
waveband (AM, FM1, FM2, FMAST) on which the  
stations are stored.  
The traffic announcement The radio station is not part of the regional traffic information network.  
Tune to a radio station which broadcasts traffic  
information.  
(TA) is displayed. I do  
not receive any traffic  
information.  
The quality of reception  
of the radio station  
listened to gradually  
deteriorates or the stored  
stations do not function  
(no sound, 87.5 Mhz is  
displayed...).  
The vehicle is too far from the transmitter used by the station listened  
to or there is no transmitter in the geographical area through which the  
vehicle is travelling.  
Activate the RDS function to enable the system  
to check whether there is a more powerful  
transmitter in the geographical area.  
The environment (hills, buildings, tunnels, basement car parks...) block  
reception, including in RDS mode.  
This phenomenon is normal and does not indicate  
a failure of the audio equipment.  
The aerial is absent or has been damaged (for example when going  
through a car wash or into an underground car park).  
Have the aerial checked by a PEUGEOT dealer.  
394  
FREQUENTLY ASKED QUESTIONS  
QUESTION  
ANSWER  
SOLUTION  
Sound cut-outs of 1 to  
During this brief sound cut-out, the RDS searches for any frequency  
Deactivate the RDS function if the phenomenon is  
too frequent and always on the same route.  
2 seconds in radio mode. permitting better reception of the station.  
With the engine off,  
the audio equipment  
switches off after a  
few minutes of use.  
When the engine is switched off, the audio equipment operating time  
Start the vehicle's engine to increase the battery  
charge.  
depends on the battery charge.  
The switch-off is normal: the audio equipment switches to economy mode  
and switches off to prevent discharging of the vehicle's battery.  
The message "the audio  
system is overheated"  
appears on the display.  
In order to protect the installation if the surrounding temperature is too  
high, the audio equipment switches to an automatic thermal protection  
mode leading to a reduction of the volume or stopping of the playing of  
the CD.  
Switch the audio system off for a few minutes to  
allow the system to cool.  
395  

Related Topics

Audio equipment and telematics

Emergency or assistance
Peugeot Connect Media Navigation (NG4 3D)
Peugeot Connect Navigation (RT6)