Get Comfort -> Front seats Guide for Peugeot 5008 SUV First Generation (2009-2016)

Comfort

Front seats with manual adjustments

Seat consisting of a seat cushion, a seat back and a head restraint which can all be adjusted to adapt your position for ease of driving and comfort.

Forwards-backwards

Height

Backrest angle

F Push the control rearwards.

F

Raise the control and slide the seat

F

Pull the control upwards to raise or push

3

forwards or backwards.

it downwards to lower, as many times as

required, to obtain the position required.

Before moving the seat backwards, ensure that there is nothing that might prevent the full travel of the seat, so as to avoid the risk of of

jamming the seat caused by the presence of objects on the floor behind the seat or rear passengers. If the seat jams, stop the movement

immediately.

71

Comfort

Driver's electric seat

Seat consisting of a seat cushion, a seat back and a head restraint which can all be adjusted to adapt your position for ease of driving and comfort.

Forwards-backwards

Cushion height and angle

Backrest angle

F

Push the control forwards or rearwards to

F

Tilt the rear part of the control upwards or

downwards to obtain the required height.

Tilt the front part of the control upwards or

downwards to obtain the required angle.

F

Tilt the control forwards or rearwards to

slide the seat.

adjust the angle of the seat back.

F

72

Comfort

Head restraint height and

angle adjustment

The electric functions of the driver's

seat are active for approximately one

minute after opening the front door.

They are deactivated approximately one

minute after the ignition is switched off

and in economy mode.

The head restraint is fitted with a frame

with notches which prevents it from

lowering; this is a safety device in case

of impact.

The adjustment is correct when the

upper edge of the head restraint is

level with the top of the head.

Before moving off, check the

3

To reactivate them, switch on the

ignition.

adjustment of the head restraint; adjust

it if the seat has been occupied by

someone of different size.

Never drive with the head restraints

removed; they must be in place and

adjusted correctly.

F

To raise the head restraint, pull it forwards

and upwards at the same time.

Before moving the seat backwards,

ensure that there is nothing that might

prevent the full travel of the seat, so

as to avoid the risk of of jamming the

seat caused by the presence of objects

on the floor behind the seat or rear

passengers. If the seat jams, stop the

movement immediately.

To remove the head restraint, press the

lug A and pull the head restraint upwards.

To put the head restraint back in place,

engage the head restraint stems in the

openings keeping them in line with the seat

back.

F

To lower the head restraint, press the lug A

and the head restraint at the same time.

To adjust the angle of the head restraint, tilt

its lower part forwards or rearwards.

73

Comfort

Manual lumbar adjustment

Heated seats control

With the engine running, the front seats can be

heated separately.

F

Turn the knob manually to obtain the

desired level of lumbar support.

F

Use the adjustment dial, placed on the side

of each front seat, to switch on and select

the level of heating required:

0: Off.

1: Low.

2: Medium.

3: High.

74

Comfort

Table position, front passenger seat

3

Folding the seat backrest

Returning the seat to the normal

position

F

Raise the armrest and fold up the "aircraft"

style table, fixed on the back of the seat.

Check that no object, either on or

underneath the seat, could hinder its

movement.

This position, associated with that of the rear

seats, allows you to transport long objects

inside the vehicle.

F

Guide the seat backrest rearwards until it

locks in place.

F

The maximum weight on the seat is 30 kg.

When the seat backrest is in this

position, only the 2^ndrow passenger

seat located behind the driver can be

used.

F

To make the operation easier, place the

head restraint in the low position (if the

seat is in the fully forward position).

If your vehicle is fitted with the video pack,

place the protective cover on the head

restraint.

Lift the control, located behind the seat,

then guide the seat back forwards.

75

Comfort

Rear head restraints

The rear head restraints can be removed and

have two positions:

-

high, position for use,

low, storage position.

To raise a head restraint, pull it upwards.

To lower it, press the lug then the head

restraint.

To remove it, place it in the high position, push

the lug and pull it upwards.

To refit it, engage the head restraint rods in the

holes taking care to remain in line with the seat

back.

Never drive with the head restraints

removed, they must be in place and

correctly adjusted.

76

Comfort -> Front seats for Your Peugeot 5008 SUV First Generation (2009-2016)

Related Topics

Comfort