Safety -> Front seat belts for Your Peugeot 5008 SUV First Generation (2009-2016)

Safety  
Seat belts  
Front seat belts  
Fastening  
Height adjustment  
7
F
Pull the strap, then insert the tongue in the  
F
To adjust the anchorage point, squeeze the  
buckle.  
control A and slide it until you find a notch.  
F
Check that the seat belt is fastened  
correctly by pulling the strap.  
The front seat belts are fitted with a  
pretensioning and force limiting system.  
This system improves safety in the front  
seats in the event of a front or side impact.  
Depending on the severity of the impact, the  
pretensioning system instantly tightens the seat  
belts against the body of the occupants.  
The pretensioning seat belts are active when  
the ignition is on.  
Front seat belts not fastened /  
unfastened warning lamp  
When the ignition is switched on, this  
warning lamp comes on in the seat belt  
and passenger's front airbag warning  
Unfastening  
lamps display, if the driver and/or the  
F
F
Press the red button on the buckle.  
Guide the seat belt as it reels in.  
front passenger has not fastened their seat belt.  
From approximately 12 mph (20 km/h)  
this warning lamp flashes for two minutes  
accompanied by an audible signal. Once these  
two minutes have elapsed, this warning lamp  
remains on until the driver and/or the front  
passenger fastens their seat belt.  
The force limiter reduces the pressure of the  
seat belt on the chest of the occupant, so  
improving their protection.  
143  
Safety  
Seat belts not fastened /  
unfastened warning lamps  
display  
Seat belt unfastened warning  
lamp  
7 seat version  
7. 3rd row rear left seat belt warning lamp  
8. 3rd row rear right seat belt warning lamp.  
This warning lamp comes on in  
the seat belt and passenger's front  
airbag warning lamps display,  
when one or more rear passengers  
unfasten their seat belt.  
From approximately 12 mph (20 km/h),  
this warning lamp flashes for two minutes  
accompanied by an audible signal. Once  
these two minutes have elapsed, this warning  
lamp remains on until the one or more rear  
passengers fasten their seat belt.  
Rear seat belts  
The rear seats are each fitted with a three-point  
inertia reel seat belt with force limiter (with the  
exception of the centre rear seat).  
1. Front and/or rear seat belts not fastened /  
unfastened warning lamp.  
Fastening  
2. Front left seat belt warning lamp.  
3. Front right seat belt warning lamp.  
4. Rear right seat belt warning lamp.  
5. Rear centre seat belt warning lamp.  
6. Rear left seat belt warning lamp.  
F
Pull the strap, then insert the tongue in the  
buckle.  
F
Check that the seat belt is fastened  
correctly by pulling the strap.  
The corresponding warning lamp 2 or 3 comes  
on in red on the seat belt and passenger's front  
airbag warning lamps display if the seat belt is  
not fastened or is unfastened.  
Unfastening  
F
F
Press the red button on the buckle.  
Guide the seat belt as it reels in.  
144  
Safety  
2nd row rear centre seat belt 3rd row rear seat belts  
(7 seat version)  
Seat belt unfastened warning  
lamps display  
The seat belt for the rear centre seat of the  
2nd row is incorporated at the rear right of  
the roof.  
The seat belts for the rear seats of the  
3rd row are incorporated at the corner of the  
corresponding boot pillar and of the roof.  
When the ignition is switched on, with the engine  
running or when the vehicle is moving at less than  
12 mph (20 km/h), the corresponding warning  
lamps 4 to 8 come on in red for approximately  
30 seconds, if the seat belt is not fastened.  
When the vehicle is moving at more than 12 mph  
(20 km/h), the corresponding warning lamp 4, 5,  
6, 7 or 8 comes on in red, accompanied by an  
audible signal and a message in the multifunction  
screen, if a rear passenger has unfastened their  
seat belt.  
7
Installation  
Installation  
F
Pull the strap and insert the tongue A in the  
right-hand buckle.  
F
Pull the strap and insert the tongue C in the  
buckle, on the boot side trim side.  
Insert the tongue D in the opposite buckle.  
Check the fastening of each buckle by  
pulling the strap.  
F
F
Insert the tongue B in the left-hand buckle.  
Check the fastening of each buckle by  
pulling the strap.  
F
F
Removal and storing  
Removal and storing  
To prevent movement of the rear side  
seat belts in the 2nd row, slide the  
straps into the guides provided for this  
purpose.  
F
Press the red button on the buckle B, then  
on the buckle A.  
F
Press the red button on the buckle D, then  
on the buckle C.  
F
Guide the strap as it reels in and bring the  
tongue B, then A onto the magnet of the  
attachment point on the roof.  
F
Guide the strap as it reels in and the  
tongues D and C.  
145  
Safety  
The driver must ensure that passengers use  
In order to be effective, a seat belt must:  
Recommendations for children  
the seat belts correctly and that they are all  
restrained securely before setting off.  
Wherever you are seated in the vehicle,  
always fasten your seat belt, even for short  
journeys.  
-
be tightened as close to the body as  
possible,  
Use a suitable child seat if the passenger is  
less than 12 years old or shorter than one and  
a half metres.  
Never use the same seat belt to secure more  
than one person.  
Never allow a child to travel on your lap.  
For more information, refer to the "Child  
seats" section.  
-
be pulled in front of you with a smooth  
movement, checking that it does not  
twist,  
Do not interchange the seat belt buckles as  
they will not fulfil their role fully.  
-
-
-
be used to restrain only one person,  
not bear any trace of cuts or fraying,  
not be converted or modified to avoid  
affecting its performance.  
The seat belts are fitted with an inertia reel  
permitting automatic adjustment of the length  
of the strap to your size. The seat belt is  
stowed automatically when not in use.  
Before and after use, ensure that the seat belt  
is reeled in correctly.  
The lower part of the strap must be positioned  
as low as possible on the pelvis.  
The upper part must be positioned in the  
hollow of the shoulder.  
The inertia reels are fitted with an automatic  
locking device which comes into operation in  
the event of a collision, emergency braking  
or if the vehicle rolls over. You can release  
the device by pulling the strap firmly and then  
releasing it so that it reels in slightly.  
In accordance with current safety regulations,  
for all repairs on your vehicle's seat belts, go  
to a qualified workshop with the skills and  
equipment needed, which a PEUGEOT dealer  
is able to provide.  
Have your seat belts checked regularly by a  
PEUGEOT dealer or a qualified workshop,  
particularly if the straps show signs of  
damage.  
Clean the seat belt straps with soapy water or  
a textile cleaning product, sold by PEUGEOT  
dealers.  
After folding or moving a seat or rear bench  
seat, ensure that the seat belt is positioned  
and reeled in correctly.  
In the event of an impact  
Depending on the nature and seriousness  
of the impact, the pretensioning device may  
be deployed before and independently of the  
airbags. Deployment of the pretensioners  
is accompanied by a slight discharge of  
harmless smoke and a noise, due to the  
activation of the pyrotechnic cartridge  
incorporated in the system.  
In all cases, the airbag warning lamp comes on.  
Following an impact, have the seat belts  
system checked, and if necessary replaced,  
by a PEUGEOT dealer or a qualified  
workshop.  
146