Get Visibility -> Wiper controls Guide for Peugeot 5008 SUV First Generation (2009-2016)

Visibility

Wiper controls

Manual controls

The wiper commands are issued directly by the

driver by means of the stalk A and the ring B.

System for selection and control of the various

front and rear wiping modes for the elimination

of rain and cleaning.

The vehicle's front and rear wipers are

designed to improve the driver's visibility

progressively according to the climatic

conditions.

Windscreen wipers

A. Wiping speed selection stalk.

4

Fast (heavy rain).

Normal (moderate rain).

Model with intermittent

wiping

Programming

Various automatic wiper control modes are also

Intermittent (proportional to the

speed of the vehicle).

available according to the following options:

Off.

-

automatic rain sensitive windscreen wipers,

rear wiping on engaging reverse gear.

Single wipe (press down and

release).

or

Automatic, then single wipe

(see the corresponding

section).

Model with AUTO wiping

95

Visibility

Rear wiper

Programming

B. Rear wiper selection ring:

The function is activated or

deactivated via the vehicle

configuration menu.

This function is activated by

default.

Park.

Intermittent wipe.

Wash-wipe (set duration).

Reverse gear

When reverse gear is engaged, the rear wiper

will come into operation if the windscreen

wipers are operating.

If a significant accumulation of snow

or ice is present, or when using a

bicycle carrier on the boot, deactivate

the automatic rear wiper via the

multifunction screen configuration

menu.

96

Visibility

Screenwash/headlamp wash low

level

In the case of vehicles fitted with

headlamp washers, when the

minimum level of the reservoir

is reached, this warning lamp is

4

displayed in the instrument panel, accompanied

by an audible signal and a message.

The warning lamp is displayed when the

ignition is switched on, or every time the stalk is

operated, until the reservoir is refilled.

Next time you stop, refill the screenwash /

headlamp wash reservoir.

Windscreen wash

To reduce the consumption of

screenwash fluid, the headlamp

washers only operate with the first

operation of the screenwash.

Pull the wiper stalk towards you. The

windscreen wash then the wipers operate for a

set time.

The headlamp wash is also activated if the

dipped beam headlamps are on.

Headlamp wash

Press the end of the lighting stalk to activate

the headlamp wash, when the dipped beam

headlamps are on.

97

Visibility -> Wiper controls for Your Peugeot 5008 SUV First Generation (2009-2016)

Related Topics

Visibility