2017-2023 Peugeot 5008 SUV Bluetooth audio system User Manual

MY CAR USER MANUAL

Bluetooth audio system for Your Peugeot 5008 SUV Second Generation (2017-2023)

Bluetooth® audio system  
Bluetooth® audio system  
To avoid discharging the battery, the  
audio system may switch off after a few  
minutes if the engine is not running.  
Short press: select the preset radio station.  
Long press: preset a radio station.  
Radio:  
Automatic step by step search up/down  
for radio stations.  
Media:  
First steps  
Select previous/next CD, USB, streaming track.  
Scroll in a list.  
Press: On/Off.  
Rotate: adjust volume.  
Radio:  
Short press: change audio source (radio;  
USB; AUX (if equipment connected); CD;  
streaming).  
Long press: display the Telephone menu (if a  
telephone is connected).  
Manual step by step search up/down for  
radio stations.  
Select previous/next MP3 folder.  
Media:  
Select previous/next folder/genre/artist/playlist  
on the USB device.  
The different functions and settings  
described vary according to the version  
and configuration of your vehicle.  
Adjust audio settings:  
Front/rear fader; left/right balance; bass/  
treble; loudness; audio ambience.  
Activate/Deactivate automatic volume  
adjustment (based on the vehicle’s speed).  
Radio :  
Short press: display the list of radio  
stations.  
Long press: update the list.  
Media :  
Short press: display the list of folders.  
Long press: display the available sorting options.  
Select the screen display mode, between:  
Date; Audio functions; Trip computer;  
Telephone.  
Scroll in a list.  
As a safety measure and because it  
requires sustained attention by the driver,  
the pairing of a Bluetooth mobile telephone  
with the Bluetooth hands-free system of your  
audio system must be done with the vehicle  
stationary and the ignition on.  
Cancel the current operation.  
Go up one level (menu or folder).  
Access the main menu.  
Activate/Deactivate TA function (traffic  
announcements).  
Long press: select type of announcement.  
Selection of FM/DAB/AM wavebands.  
Your audio system is coded in such a  
way that it will only operate in your  
vehicle.  
All work on the system must be carried out  
exclusively by a dealer or qualified workshop,  
to avoid any risk of electrocution, fire or  
mechanical faults.  
Confirm or display contextual menu.  
Buttons 1 to 6.  
228  
Bluetooth® audio system  
In the event of a telephone call:  
Short press: accept the call.  
Long press: reject the call.  
During a telephone call:  
Short press: open the contextual telephone  
menu.  
During a telephone call:  
Short press: open the contextual telephone  
menu.  
Long press: end the call.  
Confirm a selection.  
Steering mounted controls  
10  
Steering mounted controls -  
Type 1  
Increase volume.  
Decrease volume.  
Long press: end the call.  
Start voice recognition on your  
smartphone via the system.  
Radio:  
Short press: display the list of radio  
stations.  
Long press: update the list.  
Media:  
Short press: display the list of folders.  
Long press: display the available sorting options.  
Radio:  
Radio:  
Select the previous / next preset radio  
station.  
Select the previous / next item in a menu or a  
list.  
Mute / Restore sound by simultaneously  
pressing the increase and decrease  
volume buttons.  
Media:  
Select the previous / next track.  
Select the previous / next item in a menu or a  
list.  
Steering mounted controls -  
Type 2  
Radio:  
Select the previous / next preset radio  
station.  
Select the previous / next item in a menu or a  
list.  
Short press: display the list of radio  
stations.  
Long press: update the list.  
Media:  
Access to the main menu.  
Increase volume.  
Media:  
Short press: display the list of folders.  
Long press: display the available sorting options.  
Other than telephone call:  
Short press: changing audio source  
(radio; USB; AUX (if equipment connected); CD;  
streaming), confirmation if the "Telephone"  
menu is open.  
Long press: open the "Telephone" menu.  
In the event of a telephone call:  
Short press: accept the call.  
Long press: reject the call.  
Select the previous / next track.  
Select the previous / next item in a menu or a  
list.  
Mute / Restore the sound.  
Decrease volume.  
Press the thumbwheel: confirm.  
Other than telephone call:  
Short press: changing audio source  
(radio; USB; AUX (if equipment connected); CD;  
streaming), confirmation if the "Telephone"  
menu is open.  
Menus  
Depending on version.  
"Multimedia": Media settings, Radio  
settings.  
Long press: open the "Telephone" menu.  
229  
Bluetooth® audio system  
"Telephone": Call, Directory  
management, Telephone management,  
Hang up.  
Press this button to display the list of  
stations received locally.  
To update this list, press for more than two  
seconds. The sound is cut while updating.  
Long procedure  
Press the MENU button.  
"Trip computer".  
Select "Audio functions".  
Press OK.  
RDS  
"Maintenance": Diagnosis, Warning log,  
etc.  
The external environment (hills,  
buildings, tunnels, basement car parks,  
etc.) may block reception, including in RDS  
mode. This is a normal effect of the way in  
which radio waves are transmitted and does  
not indicate any failure of the audio  
equipment.  
"Connections": Manage connections,  
search for devices.  
"Personalisation-configuration": Define  
the vehicle parameters, Choice of  
language, Display configuration, Choice of units,  
Date and time adjustment.  
Select the "FM waveband preferences"  
function.  
Press OK.  
Select "Frequency tracking (RDS)".  
Press the "MENU" button.  
Press OK, RDS is displayed on the  
screen.  
If RDS is not available, the RDS symbol  
appears struck out in the screen.  
Move from one menu to another.  
Enter a menu.  
Play TA messages  
The TA (Traffic Announcement) function  
gives priority to TA alert messages. To  
operate, this function needs good reception of  
a radio station that carries this type of  
message. When a traffic report is transmitted,  
the current audio source (Radio, CD, etc.) is  
interrupted automatically to play the TA  
message. Normal play of the media  
previously playing is resumed at the end of  
the message.  
The RDS, if activated, enables you to  
continue listening to the same station by  
automatic retuning to alternative frequencies.  
However, in certain conditions, coverage of  
an RDS station may not be assured  
throughout the entire country as radio stations  
do not cover 100% of the territory. This  
explains the loss of reception of the station  
during a journey.  
Radio  
Selecting a station  
Press the SOURCE button repeatedly  
and select the radio.  
Press this button to select a waveband  
(FM / AM / DAB).  
Press one of the buttons for an automatic  
search for radio stations.  
Press one of the buttons to carry out a  
manual search up / down for radio  
frequencies.  
Short procedure  
In "Radio" mode, press the OK button to activate  
or deactivate RDS directly.  
Take care when increasing the volume  
while listening to TA messages. The  
volume may prove too high on return to the  
original audio source.  
230  
Bluetooth® audio system  
Press the TA button to activate or  
deactivate traffic messages.  
When changing region, updating the list  
of preset radio stations is recommended.  
DAB (Digital Audio  
Broadcasting) radio  
10  
Receiving INFO messages  
Terrestrial Digital Radio  
The INFO function gives priority to TA  
alert messages. To be active, this  
Depending on version  
If the current DAB radio station is not  
available on FM, "DAB FM" is struck out.  
function needs good reception of a radio  
station that transmits this type of message.  
When a message is transmitted, the current  
audio source (Radio, CD, USB, etc.) is  
interrupted automatically to receive the INFO  
message. Normal play of the media  
previously playing is resumed at the end of  
the message.  
Full list of radio stations and "multiplexes".  
Terrestrial digital radio  
Digital radio provides a superior audio  
quality and also additional categories of  
traffic announcements (TA INFO).  
The different "multiplex / ensemble” services  
offer a choice of radio stations in alphabetical  
order.  
Make a long press on this button to  
display the list of categories.  
Select or deselect categories.  
1 Options display: if active but not available, the  
display will be struck out.  
2 Display showing the name of the current  
station.  
3 Preset stations, buttons 1 to 6.  
Short press: select the preset radio station.  
Long press: memorise a radio station.  
4 Display showing the name of the “multiplex”  
service being used.  
5 RadioText (TXT) display for the current radio  
station.  
6 Represents the signal strength for the band  
being listened to.  
Change of band (FM1, FM2, DAB, etc.)  
Activate or deactivate the reception of the  
corresponding messages.  
Change of station within the same  
"multiplex / ensemble".  
Starting of a search for the previous / next  
"multiplex / ensemble".  
Display TEXT INFOS  
Radio text is information transmitted by  
the radio station related to the station's  
current programme or song.  
Long press: selection of the categories of  
news desired among Transport, News,  
Entertainment and Special Flash (available  
depending on the station).  
When the radio station is displayed in the  
screen, press OK to display the  
contextual menu.  
Select "RadioText (TXT) display" and  
confirm OK to save.  
231  
Bluetooth® audio system  
When the radio station is displayed in the  
screen , press "OK" to display the  
contextual menu.  
(Frequency search (RDS), DAB / FM auto  
tracking, RadioText (TXT) display, Information  
on the station, etc.)  
If the "DAB" station you are listening to is  
not available on FM ("DAB/FM" option  
struck out), or if "DAB / FM auto tracking" is  
not on, the sound will be cut when the digital  
signal is too weak.  
When the USB port is used, the portable  
device charges automatically.  
Play mode  
The play modes available are:  
– Normal: the tracks are played in order,  
depending on the classification of the selected  
files.  
– Random: the tracks in an album or folder are  
played in a random order.  
– Random on all media: all of the tracks saved  
in the media are played in random order.  
– Repeat: the tracks played are only those from  
the current album or folder.  
Media  
DAB / FM station tracking  
"DAB" does not have 100% coverage of  
the country.  
USB port  
Insert the USB memory stick into the USB  
port or connect the USB device to the  
USB port using a suitable cable (not supplied).  
The system changes automatically to "USB"  
source.  
When the digital signal is weak, "DAB / FM  
auto tracking" allows you to continue  
listening to the same station, by automatically  
switching to the corresponding analogue FM  
station (if it exists).  
Press this button to display the contextual  
menu for the Media function.  
Press this button to select the chosen  
play mode.  
To protect the system, do not use a USB  
hub.  
When the "DAB / FM auto tracking" is active,  
the DAB station will be selected automatically.  
Press this button to confirm.  
Press the MENU button.  
Any additional devices connected to the  
system must comply with the standard  
applicable to the product and/or the standard  
IEC 60950-1.  
The choice made is displayed at the top of the  
screen.  
Select "Multimedia" and confirm.  
Select "DAB / FM auto tracking" and  
confirm.  
Choosing a track to play  
The system builds playlists (in temporary  
memory); this operation can take from a  
few seconds to several minutes at the first  
connection.  
Reduce the number of non-music files and the  
number of folders to reduce the waiting time.  
Playlists are updated every time a new USB  
memory stick is connected.  
Press one of these buttons to go to the  
previous / next track.  
Press one of these buttons to go to the  
previous / next folder.  
If "DAB / FM auto tracking" tracking is  
enabled, there is a lag of a few seconds  
when the system switches to the analogue  
FM station sometimes with a change in  
volume.  
File classification  
Make a long press on this button to  
display the different classifications.  
232  
Bluetooth® audio system  
Select by "Folder" / "Artist" / "Genre" /  
"Playlist".  
Depending on availability and type of device  
used.  
Press OK to select the desired  
classification, then press OK again to  
confirm.  
applicable to the product and/or the standard  
IEC 60950-1.  
Press the LIST button to display the list of  
tracks on the CD.  
Press and hold one of these buttons for  
fast forward or rewind.  
10  
Press the SOURCE button several times  
in succession and select "AUX".  
First adjust the volume on your portable device  
(to a high level). Then adjust the volume on your  
audio system. Controls are managed via the  
portable device.  
Playing an MP3 compilation  
Insert an MP3 compilation in the CD player.  
The audio equipment searches for all of the  
music tracks, which may take anything between  
a few seconds and several tens of seconds,  
before play begins.  
Playing files  
Make a short press on this button to  
display the chosen classification.  
Navigate in the list using the left / right  
and up / down buttons.  
Do not connect the same device to both  
the auxiliary jack socket and the USB  
port at the same time.  
On a single disc, the CD player can read  
up to 255 MP3 files spread over 8  
directory levels.  
However, it is advisable to keep to a limit of  
two levels to reduce the access time before  
the CD is played.  
The folder structure is not observed during  
playback.  
All of the files are displayed on a single level.  
Confirm the selection by pressing OK.  
CD player  
Press one of these buttons to go to the  
previous / next track in the list.  
Press and hold one of these buttons for fast  
forward or rewind.  
Press one of these buttons to go to the  
previous / next "Folder" / "Artist" /  
"Genre" / "Playlist"* in the list.  
Insert circular compact discs only.  
Some anti-pirating systems, on original discs  
or CDs copied using a personal recorder, may  
cause faults which are no reflection on the  
quality of the original player.  
Insert a CD in the player, play begins  
automatically.  
To play a disc which has already been  
inserted, press the SOURCE button  
several times in succession and select "CD".  
Press one of the buttons to select a folder  
on the CD.  
External CD players connected via the  
USB port are not recognised by the  
system.  
Input AUX socket (AUX)  
Depending on equipment  
Connect a portable device (MP3 player,  
etc.) to the auxiliary jack socket using an  
audio cable (not supplied).  
To play a disc which has already been  
inserted, press the SOURCE button  
several times in succession and select "CD".  
Press one of the buttons to select a track  
on the CD.  
Press one of the buttons to select a track  
on the CD.  
Press the LIST button to display the list of  
directories of the MP3 compilation.  
Any additional devices connected to the  
system must comply with the standard  
* Depending on availability and the type of device used.  
233  
Bluetooth® audio system  
Press and hold one of these buttons for  
In the particular case of a multi-session CD, the  
Joliet standard is recommended.  
To protect the system, do not use a USB hub.  
Information and advice  
The CD player can play files with “.mp3”, “.wma”,  
“.wav” and “.aac” file extensions, with a bit rate of  
32 to 320 Kbps.  
It also supports TAG mode (ID3 tag, WMA TAG).  
No other file types (“.mp”4, etc.) can be read.  
Files of the ".wma" type should be to the wma 9  
standard.  
The sampling rates supported are 11, 22, 44 and  
48 kHz.  
Via the USB port, the system can play audio files  
with the extension ".mp3”, “.wma”, “.wav”, “.cbr”,  
“.vbr" with a bit rate of 32 to 320 Kbps.  
No other file types (“.mp4”, etc.) can be read.  
Files of the ".wma" type should be to the wma 9  
standard.  
The sampling rates supported are 11, 22, 44 and  
48 kHz.  
File names should have fewer than 20  
characters, avoiding special characters (e.g.  
« ? ; ù) so as to avoid any reading or display  
problems.  
In order to be able to play a burned CDR or  
CDRW, select standards ISO 9660 level 1, 2, or  
Joliet, if possible, when burning the CD.  
If the disc is burned in another format, it may not  
be played correctly.  
It is recommended that the same burning  
standard be always used on an individual disc,  
with the lowest speed possible (4x maximum) for  
the best acoustic quality.  
fast forward or rewind.  
Bluetooth® audio streaming  
Streaming allows music files on the telephone to  
be played via the vehicle's loudspeakers.  
Connect the telephone.  
(Refer to the "Pairing a Bluetooth® telephone"  
section).  
Activate the streaming source by pressing  
SOURCE.  
In certain cases, play of the audio files must be  
initiated from the keypad.  
Audio files can be selected using the buttons on  
the audio system control panel and the steering  
mounted controls. The contextual information  
can be displayed in the screen.  
If the telephone supports the function. The audio  
quality depends on the quality of transmission by  
the telephone.  
Use only USB memory sticks formatted  
FAT 32 (File Allocation Table).  
It is recommended that you use genuine  
Apple® USB cables for correct operation.  
Telephone  
Pairing a Bluetooth®  
telephone  
As a safety measure and because they  
require prolonged attention on the part of  
the driver, the operations for pairing of the  
Bluetooth mobile telephone with the Bluetooth  
hands-free system of your audio system must  
be carried out with the vehicle stationary  
and the ignition on.  
Connecting Apple® players  
Connect the Apple® player to the USB port using  
a suitable cable (not supplied).  
Play starts automatically.  
Control is via the audio system.  
Activate the telephone's Bluetooth  
function and ensure that it is "visible to  
all" (telephone configuration).  
The classifications available are those of the  
portable device connected (artists / albums /  
genres / playlists).  
The version of software in the audio system may  
not be compatible with the generation of your  
Apple® player.  
234  
Bluetooth® audio system  
Press OK to confirm.  
The services available depend on the  
network, the SIM card and the  
compatibility of the Bluetooth telephone used.  
Check the instructions for your telephone and  
with your service provider for the services to  
which you have access.  
from the system), ensure that the code is the  
same in the system and in the telephone.  
10  
Select "Bluetooth Connections  
management" and confirm. The list of  
paired telephones is displayed.  
Press OK to confirm.  
If pairing fails, the number of attempts is not  
restricted.  
A message appears in the screen confirming the  
pairing.  
Indicates that a device is connected.  
Procedure from the telephone  
Information and advice  
Select the name of the system in the list  
of devices detected.  
The "Telephone" menu gives access to the  
following functions in particular: "Directory", if  
your telephone equipment is fully compatible,  
"Call log", "View paired devices".  
Depending on the type of telephone, you may be  
asked to accept or confirm access by the system  
to each of these functions.  
A number indicates the profile of the  
connection with the system:  
– 1 for media or 1 for telephone.  
– 2 for media and telephone.  
Procedure from the system  
Press the MENU button.  
Indicates connection of the audio  
steaming profile.  
Indicates connection of the hands-free  
telephone profile.  
Select "Connections".  
Confirm with OK.  
Go to the Brand's website for more  
information (compatibility, more help,  
etc.).  
Select a telephone.  
Select "Search for a device".  
Confirm with OK.  
Press OK to confirm.  
Managing connections  
Then select and confirm:  
The telephone connection automatically  
includes hands free operation and audio  
streaming.  
The ability of the system to connect to just  
one profile depends on the telephone. Both  
profiles may connect by default.  
A window is displayed with a search in progress  
message.  
In the list of devices detected, select a telephone  
to pair. Only one telephone can be paired at a  
time.  
– "Connect telephone" / "Disconnect  
telephone" : to connect / disconnect the  
telephone or the hands-free kit only.  
– "Connect media player" / "Disconnect  
media player" : to connect / disconnect  
streaming only.  
Completing the pairing  
Press the MENU button.  
Select "Connections".  
To complete the pairing, whichever  
procedure is used (from the telephone or  
– "Connect telephone + media player" /  
"Disconnect telephone + media player" : to  
235  
Bluetooth® audio system  
connect / disconnect the telephone (hands-free  
kit and streaming).  
– "Delete connection": to delete the pairing.  
Press this button for more than two  
seconds for access to your directory, then  
navigate using the thumb wheel.  
Confirm with OK.  
Microphone off  
(so that the caller cannot hear)  
In the contextual menu:  
When you delete a pairing in the system,  
remember to delete it from your  
telephone as well.  
Ending a call  
In the "Telephone" menu.  
Select "End call".  
– select "Micro OFF" to switch off the  
microphone.  
– deselect "Micro OFF" to switch the  
microphone on.  
Confirm with OK to end the call.  
During a call, press one of these buttons  
for more than two seconds.  
Press OK to confirm.  
Receiving a call  
The system accesses the telephone's  
contacts directory, depending on its  
compatibility, and while it is connected via  
Bluetooth.  
Confirm with OK.  
An incoming call is announced by a ring and a  
superimposed display in the screen.  
Select the "YES" tab in the screen using  
the buttons.  
Telephone mode  
In the contextual menu:  
Confirm with OK.  
With certain telephones connected by  
Bluetooth you can send a contact to the  
directory of the audio system.  
Contacts imported in this way are saved in a  
permanent directory visible to all, whatever  
the telephone connected.  
– select "Telephone mode" to transfer the  
call to the telephone (for example, to leave the  
vehicle while continuing a conversation).  
– deselect "Telephone mode" to transfer the  
call to the vehicle.  
Press this button at the steering mounted  
controls to accept the call.  
Making a call  
In the "Telephone" menu.  
Select "Call".  
Select "Dial".  
Or  
The menu for the directory is not accessible if  
it is empty.  
Confirm with OK.  
If the contact has been cut off, when you  
reconnect on returning to the vehicle,  
the Bluetooth connection will be restored  
automatically and sound returned to the  
system (depending on the compatibility of the  
telephone).  
Select "Directory".  
Or  
Select "Calls list".  
Confirm with OK.  
Managing calls  
During a call, press OK to display the  
contextual menu.  
End call  
In some cases, the Telephone mode must be  
activated from the telephone.  
In the contextual menu, select "Hang up"  
to end the call.  
236  
Bluetooth® audio system  
With the engine off, the audio system  
switches off after a few minutes of use.  
When the engine is switched off, the audio  
system operating time depends on the state of  
charge of the battery.  
Interactive voice response  
compatibility, and while it is connected via  
Bluetooth.  
With certain telephones connected by  
Bluetooth you can send a contact to the  
directory of the audio system.  
10  
From the contextual menu, select "DTMF  
tones" and confirm to use the digital  
keypad to navigate in the interactive voice  
response menu.  
Contacts imported in this way are saved in a  
permanent directory visible to all, whatever the  
telephone connected.  
The menu for the directory is not accessible if it  
is empty.  
The switch-off is normal: the audio system  
switches to economy mode and switches off to  
avoid discharging the vehicle's battery.  
► Start the vehicle’s engine to increase the  
charge of the battery.  
The message "the audio system is  
overheated" is displayed onscreen.  
To protect the installation if the ambient  
temperature is too high, the audio system  
switches to an automatic thermal protection  
mode, in which the volume may be decreased or  
the CD player stopped.  
Confirm with OK.  
Consultation call  
From the contextual menu, select  
"Switch" and validate to return to a call  
left on hold.  
Voice recognition  
This function allows you to use your  
smartphone's voice recognition via the system.  
To start voice recognition, depending on the type  
of steering mounted controls:  
Make a long press on the end of the lighting  
control stalk.  
Confirm with OK.  
Directory  
To access the directory, press and hold  
SRC/TEL.  
► Switch the audio system off for a few minutes  
to allow the system to cool.  
OR  
Select "Directory" to see the list of  
contacts.  
Confirm with OK.  
Press this button.  
Radio  
There is a difference in sound quality  
between the different audio sources (radio,  
CD, etc.).  
For optimal listening quality, the audio settings  
(Volume, Bass, Treble, Ambience and Loudness)  
can be adjusted to different audio sources,  
resulting in audible differences when switching  
between sources (radio, CD, etc.).  
► Check that the audio settings (Volume, Bass,  
Treble, Ambience and Loudness) are appropriate  
to the sources being listened to. We recommend  
setting the audio functions (Bass, Treble, Fr-Re  
Voice recognition requires the use of a  
compatible smartphone first connected to  
the vehicle by Bluetooth.  
To modify the contacts saved in the  
system, press MENU then select  
"Telephone" and confirm.  
Select "Directory management" and confirm.  
You can:  
– "Consult an entry",  
– "Delete an entry",  
– "Delete all entries".  
Frequently asked  
questions  
The following information groups together the  
answers to the most frequently asked questions  
concerning your audio system.  
The system accesses the telephone's  
contacts directory, depending on its  
237  
Bluetooth® audio system  
balance and Le-Ri balance) to the middle  
position, setting the musical ambience to "None",  
setting loudness correction to "Active" in CD  
mode and "Inactive" in Radio mode.  
The preset stations do not function (no  
sound, 87.5 MHz is displayed, etc.).  
The wrong waveband is selected.  
► Press the BAND button to return to the  
waveband (FM, FM2, DAB, AM) on which the  
stations are preset.  
Traffic announcement (TA) is shown but I  
receive no traffic information.  
The radio station is not part of the regional traffic  
information network.  
► Tune to a radio station that broadcasts traffic  
information.  
The reception quality of the tuned radio  
station gradually deteriorates or the station  
presets are inoperative (no sound, 87.5 MHz  
is displayed, etc.).  
The vehicle is too far from the selected station’s  
transmitter, or no transmitter is present in the  
geographical area.  
► Activate the RDS function to allow the system  
to check for a more powerful transmitter in the  
area.  
The environment (hills, buildings, tunnels,  
basement car parks, etc.) may block reception,  
including in RDS mode.  
This is a perfectly normal phenomenon, and is  
not indicative of an audio system malfunction.  
The aerial is absent or has been damaged (for  
example when going through an automatic car  
wash or in an underground car park).  
► Have the aerial checked by a dealer.  
The sound intermittently cuts out for 1 or 2  
seconds in radio mode.  
During this brief sound cut-out, the RDS  
searches for another frequency giving better  
reception of the station.  
► Check the condition of the CD: the CD cannot  
be played if it is too badly damaged.  
► Check the content in the case of a burned  
CD: read the recommendations in the "Audio"  
section.  
Due to poor quality, certain burned CDs will not  
be played by the audio system.  
The CD audio quality is is poor.  
The CD is scratched or of poor quality.  
► Insert good quality CDs and store them in  
suitable conditions.  
The audio settings (bass, treble, ambience) are  
unsuitable.  
► Return bass and treble settings to 0, without  
selecting an ambience.  
I am unable to play the music files on my  
smartphone via the USB port.  
► Switch off the RDS function if the  
phenomenon occurs too frequently and always  
on the same route.  
Media  
The Bluetooth connection is cut.  
The battery in the peripheral device may not be  
sufficiently charged.  
Depending on the smartphone, access by the  
audio system to music on the smartphone may  
have to be approved on the latter.  
► Manually activate the MTP profile on the  
smartphone (USB settings menu).  
► Charge the battery in the peripheral device.  
The message "USB device error" is displayed  
in the screen.  
The USB stick has not been recognised, or may  
be corrupted.  
► Reformat the USB memory stick.  
The CD is systematically ejected or is not  
played.  
The CD is upside down, cannot be read, does  
not contain audio files or contains audio files of a  
format not recognised by the audio system.  
The CD is protected by an anti-pirating system  
not recognised by the audio system.  
► Check that the CD is inserted in the player  
the right way up.  
Telephone  
I am unable to access my voicemail.  
Few telephones or service providers allow the  
use of this function.  
► Call your voicemail, via the telephone menu,  
using the number provided by your operator.  
I am unable to access my directory of  
contacts.  
► Check the compatibility of your telephone.  
238  
Bluetooth® audio system  
You did not grant access to your contacts when  
pairing the telephone.  
► Accept or confirm access by the system to  
the contacts on your telephone.  
10  
I am unable to continue a conversation when  
getting into my vehicle.  
Handset mode is activated.  
► Deselect handset mode to transfer the call to  
the vehicle.  
I am unable to pair my telephone by  
Bluetooth.  
Telephones (models, versions of operating  
systems) have their own specificities in the  
pairing procedure and some telephones are not  
compatible.  
► Before starting the pairing procedure, delete  
the telephone pairing from the system and the  
system pairing from the telephone, in order to  
view the compatibility of the telephones.  
239  

Related Topics

First steps
Steering mounted controls
Menus
Radio