Get i-Connect Advanced - i-Connect Guide for Peugeot 5008 SUV Third Generation (2024-2025)

Technical data

9

Identification markings

Various visible markings for vehicle identification

and vehicle search.

A. Vehicle Identification Number (VIN),

under the bonnet.

Stamped on the chassis.

B. Vehicle Identification Number (VIN), on

the dashboard.

* With folded mirrors.

** With unfolded mirrors.

Printed on an adhesive label visible through the

windscreen.

C. Manufacturer's label.

Affixed to the right-hand door.

Bears the following information:

– Manufacturer’s name.

– European whole vehicle type approval number.

– Vehicle Identification number (VIN).

– Gross vehicle weight (GVW).

– Gross train weight (GTW).

– Maximum weight on the front axle.

– Maximum weight on the rear axle.

231

Technical data

D. Tyres/paint code label.

Affixed to the driver's door.

Bears the following information about the tyres:

– Tyre pressures, unladen and laden.

– Tyre specification, made up of the dimensions

and type as well as the load and speed indices.

– Spare tyre inflation pressure.

Also indicates the paint colour code.

The vehicle may be originally equipped

with tyres with higher load and speed

indices than those indicated onthe label,

without affecting tyre pressure (on cold tyres).

In the even of a change in the type of tyres,

contact a PEUGEOT dealer for the tyre fits

approved for the vehicle.

232

i-Connect Advanced - i-Connect

Information

The message Energy economy mode is

displayed when the system is about to go

into standby.

For more information on Energy economy

mode, refer to the "Practical information"

section.

PEUGEOT i-Connect

Advanced - PEUGEOT i-

Connect

This system gives access to the following

elements:

– Audio equipment and telephone controls with

display of associated information.

– Connected services and display of associated

information.

– Navigation system controls and display

of associated information (depending on

equipment).

– Voice recognition (depending on equipment).

– Time and outside temperature.

– Heating/air conditioning system controls and

reminders of settings.

– Settings for driving aid functions, comfort

and safety functions, extended head-up display

(depending on equipment and version), audio

equipment and digital instrument panel.

– Settings for functions specific to rechargeable

hybrid vehicles.

– Settings for functions specific to electric

vehicles.

– Display of visual manoeuvring aid functions.

– Interactive handbook.

10

GPS navigation -

The AM radio selection mode is not

available on electric vehicles.

Applications - Multimedia

audio system - Bluetooth®

telephone

Warning

Navigation is a driving aid. It cannot

replace the driver. All guidance instructions

should be carefully checked by the user.

By using the navigation, you accept

the following terms and conditions:

https://www.tomtom.com/en_gb/legal/ eula-

automotive/?388448

The functions and settings described vary

according to the version and configuration

of the vehicle, and according to the country of

sale.

For safety reasons and because they

require continued attention on the part of

the driver, the following operations must be

carried out with the vehicle stationary and

the ignition on: – Pairing the smartphone with

the system via Bluetooth^®.

– Using the smartphone.

– Connecting to Mirror Screen

(Apple^®CarPlay^®or Android Auto).

– Changing the system settings and

configuration.

First steps

The system starts when the ignition is

switched on.

– Video tutorials by QR-code (e.g. screen

management, driving aids, voice recognition).

Short press, ignition off: system on/off.

Short press, ignition on: mute/restore

sound.

Long press, ignition on: start standby mode

(mute sound and clock display).

Upper banner

Certain information is displayed permanently in

the upper banner of the touch screen:

– Outside temperature from the vehicle's

sensors (associated with a blue symbol if there

is a risk of ice).

Rotation: volume adjustment.

– Temperature setting reminder for the air

conditioning on the driver's and passenger sides.

– Charge level of the connected smartphone.

– System connection status (Bluetooth®, Wi-Fi,

mobile telephone network).

► Increase or decrease the volume using

the knob or the "plus" or "minus" buttons

(depending on equipment).

233

i-Connect Advanced - i-Connect

– Time.

Select "Create Profile", then follow

the procedure.

► To change the status of a function, press

the description for the corresponding line

(change confirmed by the slider moving to

the right/left: function activated/deactivated).

– Quick access to the Mirror Screen® functions

(associated with a connected smartphone).

Swipe down from the upper edge of the touch

screen to access the notifications centre and

display a list of quick settings :Guest, Privacy

Settings, Brightness, My Devices, night mode,

etc.

The advantage of creating a new profile is to

personalise:

– Language, units, Privacy Settings.

– Screen configuration, appearance, i-Toggles

(depending on equipment).

– Audio settings, favourite radio stations.

– Lighting, interior ambience (refer to the "Ease

of use and comfort" section).

– Navigation history, favourite points of interest

(POIs), navigation settings.

Access to additional information

about the function.

Access to a function’s settings.

Add/delete shortcuts.

Principles

Use this button (HOME)

to display the most recent

home page used; a second

►

– Some driving aids and the list of favourites.

press displays the first home page, then press

the virtual buttons displayed on the touch

screen.

To delete a profile, select it from the

list of profiles then press the bin.

Configuring profiles

Scroll through the home pages by

sliding your finger along the screen

to the right or to the left. Principle

Press the "Settings" application.

In the list, select the "Profile" tab.

Privacy Settings

of movement in the system

Depending on the pages displayed on the

screen, scroll through the text or the menu (on

the left side of the screen) by sliding your

finger, as with a smartphone.

The screen displays a "Guest" profile built

into the system and allows you to create and

personalise several new profiles with or without

an associated mobile device.

The "Guest" profile has a default

display with the possibility of adding

to it and/or returning it to its initial

configuration. This profile is built into

the system and cannot be deleted.

Each profile created can be associated

with a mobile device of your

choice connected via Bluetooth®; the

Bluetooth® function of the mobile

device must first be activated.

The last profile used will be highlighted at each

starting.

The "Privacy Settings" management is

associated with each profile. This function is

used with: a "Guest" profile configured by default

in "Private Mode", or a profile to be created

in the system, with or without connection to a

mobile device.

Touch buttons

Display/hide the context menu.

For each profile (even "Guest"), the last privacy

mode saved value will be restored.

"Sharing Data and Location"

Return to the previous page.

This mode allows the vehicle to ex-

ternally transmit all the personal data

needed for each valid available con-

nected service.

234

i-Connect Advanced - i-Connect

AppMarket

The personal data required to use the

connected services is sent to the providers

of these services.

This mode will not be applied to the

emergency call function or to specific

services to which the user has consented

under the terms of commercial contracts (e.g.

Connected alarm).

10

Subscription

Using a computer or smartphone, create or open

a MyPeugeot account on the Brand's website.

Go to the subscription section of the AppMarket.

Select the country of residence.

"Sharing Data"

This mode allows the vehicle to ex-

ternally transmit all the data needed

for each valid available connected

service, with the exception of vehicle

location data (e.g. GPS coordinates).

Professional purposes

Select the desired mode:

If the vehicle is used for professional

purposes or under the terms of specific

contracts (e.g. corporate fleet, government

assignment), some privacy modes will not

be available for the user on the screen,

depending on the data sharing needs of the

services.

– "Intermediate": free, with additional features

and accessible with authentication.

– "Premium": paid, with full features and

accessible with authentication.

After subscription, user can access to a third

mode:

Some connected services may not

function without the vehicle location data.

– "Discovery": free and accessible without

authentication.

This mode will not be applied to the

emergency call function or to specific

services to which the user has consented

under the terms of commercial contracts (e.g.

Connected alarm).

To change mode, swipe down from the upper

edge of the touch screen to display all of the

quick settings.

Authentication

When the vehicle is started, the touch screen is

switched on and the user has subscribed to one

of the AppMarket mode, the "AppMarket" icon

appears on the applications wall.

The authentication process is automatic,

when the user has previously associated his

smartphone and his MyPeugeot account to his

profile, and the smartphone is detected in the

vehicle.

The connected mobile device serves as

an access key to the "Intermediate" and/

or "Premium" AppMarket mode and profile

applications. First activate the mobile device’s

Bluetooth® function.

Press this button and select the

chosen mode. The mode is highlight-

ed.

"Private Mode"

OR

This mode does not allow the vehicle

to transmit personal data outside the

vehicle.

Press the "Settings" application.

In the list, select the "Connectivity"

tab.

Connected services will only perform local

processing inside the vehicle with limited

functions.

Select "Privacy Settings".

Choose the mode.

Press the "AppMarket" icon to in-

stall new applications or update ap-

plications already installed.

235

i-Connect Advanced - i-Connect

In case of smartphone detection problems,

use the manual authentication procedure:

The system can notify the receipt of an update

when it is connected to an exterior Wi-Fi network

or a mobile telephone network.

Large updates are downloaded only via the Wi-

Fi network.

The availability of an update is notified on the

screen at the end of the journey with an option

of immediate installation or postponement of

installation.

The installation time is variable and can take

several minutes with a maximum of about 30

minutes. A notification will give an estimate of

the duration and a description of the update.

Update information is available through the

"Settings" application.

carried out remotely, in particular using "Over

the Air" technology.

To do this, a secure connection via radio

network is established between the vehicle

and the Manufacturer's device management

server each time the ignition is switched

on, when a mobile telephone network is

available.

Depending on the vehicle's equipment,

the connection configuration must be set

to "Connected vehicle" to enable to the

connection to the radio network.

Irrespective of a valid subscription to a

connected service, the remote management

of devices relating to or connected with

the security of devices, and the updating

of software and firmware, will be carried

out when necessary in order to comply

with a legal requirement applicable to the

Manufacturer (e.g. the applicable law in terms

of product liability, the regulations governing

e-call) or when necessary to protect the

respective vital interests of the vehicle's users

and passengers.

The establishment of a secure connection via

radio network and the corresponding remote

updates are not affected by the privacy

settings and are intended to be carried out

after being initialised by the user in response

to a related notification.

Press the "AppMarket" icon.

The manual authentication page is

displayed.

Enter the email address and password of the

MyPeugeot account.

Press the "Validate" button.

The profile application icons are available on the

applications wall.

In case of an authentication problem, the

following message appears: "You are

not authenticated, your connected 10

services won't be accessible".

The profile application icons are then inactive

and greyed out.

Press the "Settings" application.

In the list, select the "Updates" tab.

Repeat the procedure. If the problem persists,

contact a PEUGEOT dealer.

This button allows you to change

the authorisation for automatic down-

loading of updates via an exterior Wi-

Fi network.

With the use of the "Guest" profile,

only the "Discovery" mode is acces-

sible.

For safety reasons and because it requires

sustained attention on the part of the

driver, the installation must be carried out with

the ignition on but without starting the engine.

The installation cannot be carried out in the

following cases:

– engine running.

– emergency call in progress.

– insufficient battery level.

– when charging for electric vehicles.

Updating the system

Managing devices remotely and remote

updating of software and firmware.

Being an integral part of the service used

to provide connected services contract(s),

the required management of devices as

well as the required updating of the

software and firmware associated with the

aforementioned connected service will be

If an update has failed or has expired, contact a

dealer or a qualified workshop.

236

i-Connect Advanced - i-Connect

Personalising the

instrument panel

The Manufacturer does not charge for the

use of this service.

A Widget is a reduced window of an

application or service.

10

However, the use of Wi-Fi and/or mobile

telephone networks by your smartphone may

incur extra charges if you exceed the data

allowance included in your contract.

Any associated costs will be billed to you by

your mobile telephone operator.

Adding a Widget

Press the pencil in the "Customize

Driver Information" part.

To add a Widget, press "Widget" on

the left of the screen.

The modification of the organisation of the

different Widget is displayed on the instrument

panel in real time.

Or

Personalisation

Press one of these buttons on the

screen.

Select the desired Widget.

A Widget is a reduced window of an

application or service.

Press and hold the screen from one

of the system's home pages.

Press the back arrow to return to the

previous page.

Adding a Widget

To add a Widget, press "Widget" on

the left of the screen.

Or

Organising the Widgets on a home page

(HOME)

Press the "Settings" application.

In the list, select the "Customiza-

tion" tab.

To move a Widget, press and hold it, then drag it

to the desired location.

Or

Press one of these buttons on the

screen.

Select the desired Widget.

Press the "Displays" field.

Adding a page

A page divided into 2 parts is displayed.

Press the HOME button at any time to leave this

page.

To add a page, press "Page" on the

left of the screen.

Press the back arrow to return to the

previous page.

Personalising the screen

Press the back arrow to return to the

previous page.

Press the pencil in the "Customize

Touchscreen" part.

Deleting a Widget

To move a Widget to the bin, press

and hold it, then drag it to the bin.

Deleting a Widget

A representation of the organisation of the

different home page (HOME) Widgets is

displayed.

To move a Widget to the bin, press

and hold it, then drag it to the bin.

237

i-Connect Advanced - i-Connect

Personalising i-Toggles

Media: previous/next track, movement in the

lists.

Phone: browse the telephone's call log.

Short press: validate a selection. Out of

selection, display the lists.

Steering-mounted 10

(depending on equipment)

In the central screen, display the page

containing the button that you want to include.

controls

Voice control:

Short press, system voice commands

(depending on equipment).

Long press, voice commands of

The shortcuts are used to access an

application (air conditioning page, radio

page, etc.) or to perform an action (set the

temperature to 21°, call a selected directory

contact, etc.).

Applications

the smartphone connected using

From the home page, press this but-

ton to access the applications wall.

Bluetooth® or Mirror Screen® (Apple®CarPlay®/

Android Auto) via the system.

Increase volume.

Press and hold the shortcut you want

to replace.

From any page, press the touch screen

with three or more fingers to display the

applications wall.

Decrease volume.

A panel is displayed on the central screen with

all of the eligible shortcuts in boxes.

A notification also informs you of the next step to

perform.

Select the new shortcut required. It will be

duplicated in i-Toggles and will replace the one

originally selected. A notification also informs

you of this.

Help

Mute the sound: long press on the decrease

volume button.

Restore the sound by pressing one of the two

volume buttons.

Access the handbook and watch tu-

torials.

Incoming call (short press): accept

the call.

Radio/Media

Call in progress (short press): hang

up.

Incoming call (long press): refuse the incoming

call.

To exit this function at any time,

press this button or press the main

"Home" button.

Select an audio source or radio sta-

tion.

Out of call (short press): access the call log of

the telephone connected via Bluetooth®.

Mirror Screen^®connected (short press):

access the projected view of the telephone

application of your Mirror Screen^®equipment.

Radio: automatic search for

the previous/ next station (in

the list of radio stations sorted

by name or by frequencies).

Mirror Screen®

Smartphone connected with Mirror

Screen^®: access to the projected view

of Apple^®CarPlay^®or Android Auto.

Smartphone not connected: access

the menu allowing you to connect a smartphone.

238

i-Connect Advanced - i-Connect

– "Listen for (OK Peugeot)": to invoke

the voice recognition using the keyword "OK

Peugeot".

Voice commands

Navigation

(depending on equipment) Enter

10

– "Vocal Barge-In": to allow user to speak over

spoken dialog prompts and be recognized.

– "Data Usage": to authorise our supplier to re-

use your data in order to let him globally improve

First steps

navigation settings and choose a

destination.

(depending on equipment)

Use services available in real time, depending

on equipment.

The voice recognition service offers a

its capabilities in term of voice recognition and

voice assistance.

choice of several languages (e.g. French,

German, English (UK), English (US), Arabic,

Brazilian, Canadian, Chinese, Danish, Spanish,

Hebrew, Italian, Japanese, Korean, Mexican,

Dutch, Norwegian, Polish, Portuguese, Russian,

Swedish, Czech, Turkish) available with the

cellular network and in line with the language

chosen and previously configured in the system.

Voice commands

(depending on equipment) Use the

system or smartphone voice recogni-

tion via the system.

Voice Assistant/Data Usage

Vehicle's location and voice recordings are

not concerned; only textual transcriptions of

your conversations with the voice assistant

are kept after to be pseudonymised.

Phone

Telephone not connected: access the

menu allowing you to connect a

telephone.

Information - Using the

system

Opening voice recognition

Telephone connected: access the call

log, contacts and telephone settings.

Two connected telephones: access the contents

of the priority telephone with the possibility of

changing the priority of the telephone.

Voice commands can be used on any

screen page, provided there are no

other sources which take priority in

use (reverse, emergency or assistance

call, telephone call, other smartphone voice

recognition already launched).

When voice commands are activat-

ed, say your command after the au-

dible signal.

Date/Time

For commands in several stages, interaction

takes place with the system to complete the

initial request.

Some commands self-validate after 7 seconds.

If the system has not taken your command into

account, it will indicate this by a voice message

and an on-screen display.

Choice of opening voice recognition:

Settings for the date and time of the

audio system.

► Say "OK Peugeot".

or

Settings

► Press the button located on the steering

wheel.

Main settings for the audio system,

touch screen and digital instrument

panel.

Press the "Settings" application.

In the list, select the "Voice Assis-

tant" tab.

or

► Press the touch screen button.

Activate/Deactivate:

239

i-Connect Advanced - i-Connect

Press "Search" to enter an address

or a name.

To ensure that voice commands are

always recognised by the system, please

follow these recommendations:

– Use natural language in a normal tone

without breaking up words or raising your

voice.

Depending on the country, give destination

(address) instructions in the language

configured for the system.

Press this button to display the main

menu for the various options.

Voice command example for tele-

phone:

– After opening voice recognition with the

steering wheel-mounted button or the button

on the touch screen, always wait for the

"beep" (audible signal) before talking. No

"beep" sounds when voice recognition is

opened using "OK Peugeot".

– For optimal operation, it is recommended

that you close the windows and the

sunroof (depending on equipment) to avoid

any external interference, and switch the

ventilation off.

Press this button to display the

3D/2D mode.

"Call Matthew's mobile"

"call 0113 345 9869"

"Call jonathan"

Select "Sound activated", "Alerts

only" and "Silent" with successive

presses on this button.

If there is no telephone connected by

Bluetooth^®, a pop-up window appears:

"Connect a telephone by Bluetooth^®", and

the voice session will be closed.

Press the "plus"/"minus" buttons to

zoom in/out, or use two fingers on

the screen.

Navigation

– Before speaking the voice commands, ask

the other passengers not to speak.

Main menu

Press the "Navigation" application

to display the navigation home

screen.

Navigation home screen

Voice command example for air con-

ditioning:

"raise the fan speed"

"Turn on air conditioning"

"i'm too hot"

(depending on equipment)

Press this button to display the main

menu for the various options.

Access to additional videos

Voice command example for radio

and media:

"I want to listen to michael jack-

son"

Select "Search" to enter an address,

name or some points of interest.

Select "Go home" using an address

previously saved in "Add home".

"switch to radio"

"tune to 88.5"

Voice command example for naviga-

tion:

"navigate home"

https://www.tomtom.com/

PSAGroup-Connected-Nav

Press the "Navigation" application to display

the navigation home screen.

Select "Go to work" using an ad-

dress previously saved in "My pla-

ces".

"Navigate me to gabrielle's house"

"search for public parking nearby"

240

i-Connect Advanced - i-Connect

Select "Recent destinations" to dis-

play the latest destinations searched.

Regular connection to a secure Wi-Fi

access point automatically updates the

installed mapping globally.

The mapping is also updated using a cellular

network, depending on version, country of

sale, the vehicle's level of equipment, as well

as the subscription to connected services and

options.

However, using your smartphone's Wi-Fi

and/or cellular networks may incur additional

charges if you exceed your data plan.

These charges, if any, will be passed on to

your telephone operator's bill.

It is recommended that you use your

10

device's original USB cables, preferably

with a short cable to ensure optimum

performance.

Select "Current trip" to open anoth-

er menu and perform various actions

for the current planned route.

To protect the system, do not use a USB

hub.

Select "My places" for quick access

to saved places as well as favourite

destinations.

Bluetooth® connection

Select "My trips" to display your fa-

vourite routes.

Connecting a mobile device to the vehicle's

system via Bluetooth® provides access to its

contents and its "Media" streaming. It also

enables the Phone function to be activated.

The connection can be initiated either from the

mobile device's Bluetooth® menu or from the

vehicle's system, which requires opening the

"My Devices" menu for the first connection.

Select "Parking" to display the vari-

ous parking options in the area.

Connectivity

Select "Service station" to display

the different service stations on the

current route or near the current lo-

cation.

Select "TomTom service" to check

the network status.

Connecting a wired device

by USB

In some cases, you will need to unlock

your device and check the authorisation to

synchronise contacts and recent calls.

Some features may not be supported by your

device.

For information on the partial or

full compatibility of device models or

smartphones, please connect to the Brand’s

national website.

The USB connection of a mobile device allows

it to be recharged. It makes its authorised media

content available to the system (Media content

of iPod® type).

Select "Settings" to enter the vehi-

cle type and to personalise the dis-

play, voice instructions, map options,

trip planning, sounds and alerts, and

system information.

Select this button to display details

on software versions as well as le-

gal information. Details of the Open

Source software libraries used and

their licence URLs.

Only one USB socket will

allow a Mirror Screen connection

(Apple^®CarPlay^®or Android Auto)

for the compatible connected mobile

devices and to use some of the device's

applications on the touch screen.

For more information on the USB socket

compatible with the Mirror Screen® function,

refer to the "Ease of use and comfort - Fittings"

section.

Pairing procedure from a device

From the Bluetooth^®menu on your

mobile device, select the system’s

name from the list of detected devi-

ces.

The mobile device is in charging mode when

connected with the USB cable.

241

i-Connect Advanced - i-Connect

Select the Wi-Fi network to connect to and enter

its password.

In order to make your system’s Bluetooth®

visible, first open the "My Devices" menu

on the system.

A mobile device already connected to

the system will be able to reconnect

automatically when the vehicle is started,

once the user profile has been selected.

Automatic reconnection is put on hold as

soon as the "My Devices" menu is opened.

This is to allow the system to make its

Bluetooth^®visible for the connection of a new

device.

To protect your system, only networks with

a sufficient level of security are allowed to

connect. WPA2 encryption level, equivalent to

a domestic level, is required.

Continue the first connection procedure

proposed by the system and on the device.

For example: validating pairing codes.

Pairing procedure from the system

Any network already connected to the

system will reconnect automatically as

soon as it is detected by the system and after

having previously activated the Wi-Fi function.

Press the "Settings" application.

In the list, select the "Connectivity"

tab.

The system is disconnected when the driver’s

door is opened and the ignition is switched

off.

Select "My Devices".

Automatic reconnection

The Wi-Fi connection of the system to a

device already connected using a Mirror

Screen® wireless connection is not possible.

In this case, favour a Mirror Screen^®

connection using the USB socket.

The system allows automatic reconnection of

devices already connected and detected when

a user profile is selected.

The priority reconnected devices are those

which have been linked to the selected user

profile or, failing this, the last connected devices.

Select the name of the mobile device

that you want to connect, from:

– The list of known devices (if the

device has already been connected to

the system).

Device management

or

Wi-Fi connection

For each device already connected to the

system using a wireless connection (Bluetooth®

or wireless Mirror Screen® connection), it is

possible to determine a preferred connection

mode (depending on the functions the

device can support). It is therefore possible

to determine whether the device should

be connected using a wireless Bluetooth®

connection or a wireless Mirror Screen®

connection each time the system is started once

the profile is chosen.

– The list of detected devices (if the device

has never been connected to the system or

previously deleted from the system).

The system has an external Wi-Fi connection

mode for performing system updates.

Press the "Settings" application.

In the list, select the "Connectivity"

tab.

Select "Wi-Fi".

Activate/Deactivate "Wi-Fi".

The system starts a search for near-

by Wi-Fi networks. This may take a

few seconds.

Press the "Settings" application.

In the list, select the "Connectivity"

tab.

242

i-Connect Advanced - i-Connect

Select "My Devices" to display the

list of paired devices.

Apple®CarPlay®

smartphone connection

Only one USB socket enables the Mirror

Screen^®connection (Apple^®CarPlay^®);

refer to the "Ease of use and comfort -

Fittings" section.

It is recommended that you use the device's

original USB cables, preferably with a short

cable to ensure optimum performance.

10

Press this button to manage the con-

nection of a device.

Connecting just one Apple®CarPlay®

smartphone can be carried out either by USB

cable or using a wireless connection.

Choose a connection type then confirm this

choice by pressing “APPLY".

First activate the Siri^®function on your

Apple^®smartphone.

If the device fails to connect, refer to the

Apple website to check that the device is

compatible with this function.

If the problem persists, delete all saved

connections on the smartphone and on the

system before attempting a new connection.

The wireless connection of an Apple^®CarPlay^®

smartphone can be initiated from the "My

Devices" menu.

First activate the smartphone’s CarPlay^®

function.

Deleting a device

Press the "Settings" application.

In the list, select the "Connectivity"

tab.

In the Bluetooth menu, click on the "i" next to

the relevant vehicle and activate CarPlay.

Select "My Devices" to display the

list of paired devices.

Press the "Settings" application.

In the list, select the "Connectivity".

The cable connection requires that you

deactivate the CarPlay function in the Settings,

Bluetooth menu of your smartphone.

In the Bluetooth menu, click on the "i" next to

the relevant vehicle and deactivate CarPlay.

Press this button.

Press "DELETE".

Confirm by pressing “YES”.

Select "My Devices" to display

the device to be connected to Ap-

ple^®CarPlay^®.

Connect the smartphone to the sys-

tem using the USB socket compati-

ble with Mirror Screen.

Some devices that have just been deleted

from the system request a connection,

refuse this request.

If the device has already been connected to the

system via Bluetooth^®, select the device settings

from the list of known devices and choose

Apple^®CarPlay^®as the wireless connection

mode.

If the device has never been connected to the

system before, it will have to be paired (refer to

the "Bluetooth^®connection" section).

The system detects if the smartphone is

compatible with Apple^®CarPlay^®and offers to

connect to it following the pairing process.

Apple^®CarPlay^®is automatically launched a few

seconds after the USB connection has been

established. In some cases, it may be necessary

to unlock your device.

The smartphone charges when connected by the

USB cable.

The cable connection allows you to avoid

disconnections, especially when passing through

toll booths.

Mirror Screen®

When a smartphone is connected using

Mirror Screen^®, the vehicle's location and

some vehicle data is sent to the smartphone

(e.g. brand, left-hand or right-hand drive, day/

night mode, physical speed).

243

i-Connect Advanced - i-Connect

Subsequent automatic connection of the

smartphone requires activation of the Bluetooth®

on your device.

Connect the smartphone to the sys-

tem using the USB socket compati-

ble with Mirror Screen®.

If the device has never been connected to the

system before, it will have to be paired (refer to

the "Bluetooth^®connection" section).

The system detects if the smartphone is

compatible with Android Auto and offers to

connect to it following the pairing process.

If the device has already been connected to the

system via Bluetooth^®, select the device settings

from the list of known devices and choose

Android Auto as the wireless connection mode.

The subsequent automatic connection of the

smartphone requires activation of Bluetooth^®on

your device.

As soon as the connection is estab-

lished, press this button to display

the "Apple^®CarPlay^®" interface.

Android Auto is automatically launched a few

seconds after the USB connection has been

established. A validation procedure on the

smartphone has to be followed for the first

connection, with the vehicle stationary.

The smartphone charges when connected by the

USB cable.

The cable connection allows you to avoid

disconnections, especially when passing through

toll booths.

To initiate the smartphone voice

commands, press and hold the steer-

ingmounted control button.

Android Auto smartphone

connection

As soon as the connection is estab-

lished, press this button to display

the "Android Auto" interface.

Connecting just one Android Auto smartphone

can be carried out either by USB cable or using

a wireless connection.

Only one USB socket enables the Mirror

Screen^®connection (Android Auto); refer

to the "Ease of use and comfort - Fittings"

section.

It is recommended that you use the device's

original USB cables, preferably with a short

cable to ensure optimum performance.

To initiate the smartphone voice

commands, press and hold the steer-

ingmounted control button.

First install the "Android Auto" application

via "Play Store" on your smartphone.

The "Android Auto" function requires a

compatible smartphone.

If the device fails to connect, refer to the

Android Auto website to check that the device

is compatible with this function.

If the problem persists, delete all saved

connections on the smartphone and on the

system before attempting a new connection.

To ensure an optimum wireless connection,

we recommend avoiding placing your

smartphone too close to other Wi-Fi networks

to which it can connect automatically.

Media

The wireless connection of an Android Auto

smartphone can be initiated from the "My

Devices" menu.

First activate the smartphone’s Android Auto^®

wireless function, in the Settings menu of the

"Android Auto" application of your smartphone.

Changing source

Press the "Media" application.

Press the "Settings" application.

In the list, select the "Connectivity".

Press this button to change source

(radio, audio streaming via a

USB socket, Bluetooth^®or Mirror

Screen®).

Select "My Devices" to display the

device to be connected to Android

Auto.

The cable connection requires that you

deactivate the Android Auto wireless function,

in the Settings menu of the "Android Auto"

application of your smartphone.

244

i-Connect Advanced - i-Connect

Press the "Media" application.

In the list, select the "Stations" tab.

Selecting a radio station

Radio reception may be affected by the

use of electrical equipment not approved

by the Brand, such as a charger with USB

socket connected to the 12 V socket.

The exterior environment (hills, buildings,

tunnels, basement car parks, etc.) may block

reception, including in RDS mode. This

phenomenon is normal in the propagation

of radio waves and does not indicate any

malfunction of the system.

10

Press the "Media" application.

In the list, select the "Player" tab.

The search is carried out automatically.

Using the steering-mount-

ed controls, press and hold

this button.

The search is carried out

automatically.

Press one of the buttons

to perform an automatic

search for radio stations.

Or

Activating radio station

tracking

Move the slider to manually search

for frequencies up or down.

Storing a radio station

Select a station.

The system changes frequency automatically to

obtain better reception.

Press the "Media" application.

In the list, select the "Player” tab.

Or

Press this button.

Press the "Media" application.

In the list, select the "Settings” tab.

Press the "Radio Favorites" button.

Enter the frequency values using the

virtual keypad.

Activate “Radio Station Tracking”.

The lighting of the slider confirms

that the function is activated.

Storing takes place via a short or

long press on one of these buttons,

or a long press on an existing fa-

vourite radio station, which will be re-

placed.

Press this button to confirm.

Changing the waveband

Press this button to return to the pre-

vious page.

Press the "Media" application.

In the list, select the "Settings” tab.

A list of stations is available by pressing the

“Stations” tab.

Press this button to change the

waveband (FM - AM - DAB) accord-

ing to the country of sale.

Press “Mute” to activate/deactivate

the sound.

Automatic search for radio

stations

Via the "Media" application.

245

i-Connect Advanced - i-Connect

Activating traffic

announcements

Configuring audio and radio

settings

Once connected in streaming mode, the

smartphone is considered to be a media

source.

This function gives priority to listening to Traffic

announcements alert messages. To be active,

this function needs good reception of a radio

station that transmits this type of message.

While traffic information is being broadcast, the

current radio station is automatically interrupted

so that the message can be heard. Normal radio

listening resumes as soon as the message is

finished.

Audio settings can be accessed in 2 different

ways.

Via the Media application

Playing a track

Press the "Media" application.

In the list, select the "Settings" tab.

If several devices are connected,

press this button to select one.

Or Via the Settings application

Press the "Settings" application.

In the list, select the "Audio and Ra-

dio" tab.

Press the "Media" application.

In the list, select the "Player" tab.

Once the device is connected, browsing through

the files is possible by pressing the "Playlist" or

"Library" button.

Activate “Traffic Announcement

(TA)”.

The lighting of the slider confirms

that the function is activated.

It is possible to configure:

– Sound Settings.

– Radio Settings.

Short press: go to the pre-

vious/ next track.

Long press: fast-for-

ward/rewind in a track.

– Volume Settings.

Information and advice

Audio streaming

Repeat the current title or the list of

selected titles.

The system supports USB Mass Storage

devices or Apple® devices via the USB sockets.

The adapter cable is not supplied.

Devices are managed using the audio system

controls.

The system will only play audio files with

".wma, .aac, .flac, .ogg, .mp3" file extensions, at

bit rates between 32 Kbps and 320 Kbps.

It also supports VBR (Variable Bit Rate) mode.

No other file types (".mp4", etc.) can be read.

".wma" files must be of the WMA 9 standard.

The supported sampling rates are 32, 44 and 48

KHz.

The streaming function allows you to listen to

the audio stream coming from the smartphone(s)

connected via Bluetooth®, USB (iPod® type) or

Mirror Screen®.

First adjust the volume on the portable device (to

a high level).

Then adjust the volume of the system.

If playback does not start, it may be necessary to

start the audio playback from the smartphone.

Control is from the portable device or by using

the system's touch buttons.

Random track playback.

Sound deactivation/reactivation.

246

i-Connect Advanced - i-Connect

To avoid reading and display problems, we

recommend choosing file names less than 20

characters long that do not contain any special

characters (e.g. “ ? . ; ù).

Use only USB memory sticks in FAT32 format

(File Allocation Table).

Or

Select and call one of the most recent numbers

called in the list.

10

Press this touch screen button.

It is always possible to make a call directly

from the telephone; as a safety measure,

first park the vehicle.

Press this button on the touch screen

to send an automatic message indi-

cating that you are driving.

We recommend using the original USB

cable for the portable device.

Calling a contact

Press the "Phone" application.

In the list, select the "Contacts” tab.

Select the desired contact in the dis-

played list.

Call the contact by selecting one of

the contact's phone numbers.

Making a call

Phone

Using the telephone is strongly

discouraged while driving.

Park the vehicle.

Receiving a call

An incoming call is announced by a ring and a

display overlaid on the screen.

Accepting the call:

Making a call using the numeric keypad

Organising the contact list

Press the "Phone" application.

In the list, select the “Keypad” tab

then dial the number.

Press the "Phone" application.

In the list, select the “Settings” tab

to display the telephone-related set-

tings.

briefly press the telephone button on

the steering-mounted controls to ac-

cept an incoming call.

Press this button to make the call.

Choose to list the contacts starting

with their first or last name.

Or

Press this touch screen button.

Making a call using the list of recent calls

Press the "Phone" application.

In the list, select the "Calls" tab.

Ending the call:

press and hold...

Or

Briefly press...

the telephone button on the steering-

mounted controls.

the telephone button on the steering-

mounted controls to refuse the call.

247

i-Connect Advanced - i-Connect

Press the back arrow to return to the

previous page.

Connecting two phones

Managing the system

connectivity

The system allows two phones to be

connected simultaneously:

– 2 via Bluetooth^®connection.

or

– 1 via Bluetooth^®connection and 1 via Mirror

Screen^®connection.

Press the "Settings" application.

In the list, select the "Connectivity"

tab.

Setting the date and time

Select “Date and Time” to modify

the date and time.

It is possible to manage:

– The Bluetooth^®connection.

– The Mirror Screen^®smartphone connections

(Apple^®CarPlay^®/Android Auto).

– The Wi-Fi connection.

Press the desired language.

Display and content priority is given to the last

phone used.

To change the priority of the phone:

“Automatic Date and Time” is acti-

vated by default, so that the setting

is made automatically according to

your geolocation.

– The privacy mode.

Press the "Phone" application.

Configuring the system

Press the "Settings" application.

In the list, select the "System” tab.

Press this button to change the prior-

ity of the phone.

To adjust manually, deactivate “Automatic Date

and Time”.

Press the “Select Time Zone” field then define

a time zone.

It is possible to configure:

Settings

– the language.

– the date & time.

Press the back arrow to return to the

previous page.

– the unit of distance and consumption (kWh/100

miles - miles, mi/kWh - miles, km/kWh - km).

– the temperature unit (Fahrenheit, Celsius).

It is also possible to reset the system

configuration.

Configuring the screen

display

Press the “Set Time” line then set the time.

Press this button to confirm.

Press the "Settings" application.

In the list, select the "Customization" tab.

It is possible to configure:

Selecting the language

Select "Language" to change the

language.

– the screen colours associated with the interior

ambient lighting. Refer to the "Ease of use and

comfort" section.

Press the “Set Date” line then set the date.

Press this button to confirm.

– the sound ambience.

– the visual welcome and goodbye animations.

– the screen transition animations.

Press the desired language.

248

i-Connect Advanced - i-Connect

Select the Time Format field (12-

hour / 24-hour).

It presents the different possibilities for

accessing the information sought:

– Display of a list of subjects, if several subjects

are associated with the bullet point.

10

Visual search

Indicator lamps

Select the Date Format field (MM-

DD-YY / YYYY-MM-DD / DD/MM/

YYYY).

Access to subjects via pictures rep-

resenting the exterior and interior of

the vehicle.

Press Indicator lamps.

The system does not automatically

change between winter and summer time

(depending on the country of sale).

The mosaic of warning/indicator lamps is

displayed.

The warning/indicator lamps are sorted by

colour.

Press the warning/indicator lamp concerned; the

corresponding content is displayed.

Indicator lamps

Access to the descriptions/operation

of the instrument panel warning/indi-

cator lamps.

Help

System

Back to the mosaic of warning/indi-

cator lamps.

Press the "Help" application.

In the list, select the “User Manual”

tab to consult the vehicle’s hand-

book.

Access to sections dedicated to the

various audio equipment and tele-

matics systems.

System

or In the list, select the “Tutorials” tab to watch

explanatory videos for a quick start on screen

management, certain driving aids and voice

recognition.

Contents

Press System.

Access to subjects via the main sec-

tions of the handbook.

The list of audio and telematics systems is

displayed.

User Manual

Visual search

Select the display language.

Press on the section concerned; the list of

subjects is displayed.

Press on the subject concerned; the

corresponding content is displayed.

Press Visual search.

Press one of the pictures located at

the bottom of the screen.

Press one of the bullet points in the

enlarged view.

The handbook home page is displayed.

If the subject has more than one

page, drag horizontally.

There are two cases:

Back to the list of subjects.

– Direct display of the subject, if only one subject

is associated with the bullet point.

249

i-Connect Advanced - i-Connect

Contents

Press Contents.

The list of sections is displayed.

Press on the section concerned; the list of

subjects is displayed.

Press on the subject concerned; the

corresponding content is displayed.

If the subject has more than one

page, drag horizontally.

Back to the list of subjects.

250

Download User Manual App

i-Connect Advanced - i-Connect for Your Peugeot 5008 SUV Third Generation (2024-2025)

Related Topics

Popular Owner Manuals

Latest Owner Manuals