In the event of a breakdown
Running out of fuel (Diesel)
On vehicles fitted with Diesel engines, the fuel
1.6 litre HDi engine
2 litre HDi engines
system must be primed if you run out of fuel.
For all versions other than BlueHDi, refer to the
corresponding engine compartment view.
For more information on the Diesel
misfuel prevention device, refer to the
corresponding section.
F
Fill the fuel tank with at least five litres of
diesel.
F
Fill the fuel tank with at least five litres of
Diesel.
F
F
Open the bonnet.
If necessary, unclip the styling cover for
access to the priming pump.
Squeeze and release the priming pump
repeatedly until resistance is felt (there
may be resistance at the first press).
Operate the starter until the engine starts
(if the engine does not start at the first
attempt, wait around 15 seconds before
trying again).
F
F
Open the bonnet.
If necessary, unclip the styling cover for
access to the priming pump.
Squeeze and release the priming pump
repeatedly until fuel appears in the
transparent pipe.
Operate the starter until the engine starts
(if the engine does not start at the first
attempt, wait around 15 seconds before
trying again).
If the engine does not start first time,
don't keep trying but start the procedure
again from the beginning.
F
F
F
F
BlueHDi engines
F
If the engine does not start after a few
attempts, operate the priming pump again
then start the engine.
Clip the styling cover back in place.
Close the bonnet.
F
If the engine does not start after a few
attempts, operate the priming pump again
then start the engine.
Put the styling cover back in position and
clip it in place.
F
F
F
Fill the fuel tank with at least five litres of
Diesel.
Switch on the ignition (without starting the
engine).
Wait around 6 seconds and switch off the
ignition.
F
F
F
F
Close the bonnet.
F
F
Repeat the operation 10 times.
Operate the starter to run the engine.
228
English 
