Lighting and visibility
guide-me-home lighting
Manual guide-me-home
lighting
Automatic guide-me-home
lighting
temporarily keeping the dipped beam
Programming
headlamps on after the ignition has been
switched off makes the driver's exit easier
when the light is poor.
the duration of the guide-me-
home lighting is is set in the Main
menu of instrument panel screen.
Select "Vehicle parameters" then
"Lighting", then change the lighting
duration.
When the automatic illumination of headlamps
function is activated, under low ambient
light the dipped beam headlamps come on
automatically when the ignition is switched off.
the duration of the guide-me-
home lighting is is set in the Main
menu of instrument panel screen.
Select "Vehicle parameters" then
"Lighting", then change the lighting
duration.
Switching on
F
Within 30 seconds or a minute after
switching of the ignition (according to the
lighting duration programmed in the main
menu of the instrument panel), "flash" the
headlamps using the lighting stalk.
A further "headlamp flash" switches the
function off.
F
Switching off
the manual guide-me-home lighting switches
off automatically after about 30 seconds.
124
English 
