COMFORT
3
G - Heated seats adjustment
An audible signal confirms that a posi-
tion has been memorised.
Memorising a new position cancels
the previous one.
Memorising driving and mirror
positions
Recalling a memorised driving
position
Ignition on, vehicle stationary
Briefly press button 1 or 2 to recall
the corresponding memorised posi-
tion. The end of the setting is indi-
cated by a bleep.
After recalling a memorised position
a few times in succession, the func-
tion will be cancelled until the engine
is started.
With the engine running, use the cor-
responding adjustment dial to select
the required degree of heating:
0: Off.
1: Low.
The electrical adjustments of the seat
and exterior mirrors are memorised.
Two driving positions can be memo-
rised using buttons M/1 and M/2.
2: Medium.
3: High.
Vehicle moving
Keep button 1 or 2 pressed down
until the bleep indicates that setting
of the corresponding memorised
position is complete.
Memorising using the controls on
the driver's door
To memorise:
Place the key in the ignition on
position,
Adjust your seat and mirrors,
Press button M, then button 1 "first
driving position" or button 2 "sec-
ond driving position" within four
seconds.
50
English 
