Get Driving -> Cruise control / Speed limiter Guide for Peugeot 607 4 Door First Generation (1999-2010)

DRIVING

8

Selecting the function

Cancelling the memorised speed

CRUISE CONTROL / SPEED

LIMITER

 Place switch 1 in the CRUISE

position. The cruise control is not

yet active and no speed has been

memorised. The display indicates:

If you wish to cancel the memorised

speed:

 Press button 4 or the brake or

clutch pedal.

The display indicates (e.g. at 70 mph

(110 km/h)):

Switching the function off

 Place switch 1 in position 0 or LIMIT

to switch the system off.

Note: the speed memorised is

cancelled automatically if the

vehicle speed is less than 25

First activation / memorising a

speed

mph (40 km/h), or if the man-

Cruise control function

This enables the vehicle to maintain

a steady speed programmed by the

driver.

In order for it to be memorised, the

vehicle speed must be greater than

25 mph (40 km/h) with at least fourth

gear engaged for vehicles ﬁtted with a

manual gearbox.

ual gearbox is in a gear lower than

fourth (second gear for the automatic

gearbox) or if the ESP is activated.

As soon as you reach the chosen

speed, press button "set-" 2 or "set+"

3. This memorises the speed, which

will be maintained automatically. The

display indicates (e.g. at 70 mph (110

km/h)):

On vehicles ﬁtted with an automatic

gearbox, the lever must be in posi-

tion D or at least second gear must be

engaged in sequential driving mode.

On a steep descent, the cruise

control, which does not act on

the brakes, will not be able to

preventthevehiclefromexceed-

ing the programmed speed.

Note: It is possible to accel-

erate and drive momentarily

at a speed greater than the

The cruise control cannot, in any cir-

cumstances, replace the need to com-

ply with speed limits or the need for

vigilance and responsibility on the part

of the driver.

memorised speed. The value

memorised ﬂashes. When the accel-

erator pedal is released, the vehicle

will return to the memorised speed.

92

DRIVING

8

Reactivating the memorised speed

Cancelling the memorised speed

Speed limiter function

After cancellation, press button 4. Your

vehicle will return to the last memo-

rised speed. The display indicates

(e.g. at 70 mph (110 km/h)):

 When the vehicle is stationary, after

the ignition has been switched off,

the system no longer stores any

speed.

Operating check

In the event of a cruise control malfunc-

tion, the memorised speed is erased,

the dashes ﬂash for a few seconds:

Changing a memorised speed

To memorise a speed higher than the

previous one, there are two options:

Without using the accelerator:

 press button 3;

A brief press increases by 1 mph

(1 km/h).

A maintained press increases in steps

of 5 mph (5 km/h).

Using the accelerator:

 exceed the memorised speed until

the required speed is reached,

 press button 2 or 3.

To memorise a speed lower than the

previous one:

 press button 2;

A brief press decreases by 1 mph

(1 km/h).

This prevents the vehicle speed

exceeding the speed programmed by

the driver (minimum speed of 18 mph

(30 km/h)).

The operations must be carried out:

- while stationary, with the engine

running,

or

- while the vehicle is moving.

Contact a PEUGEOT dealer to have

the system checked.

Do not use the cruise control

on slippery roads or in heavy

trafﬁc.

On a steep descent or if you

accelerate sharply, the speed

limiter, which does not act on

the brakes, will not be able to

prevent the vehicle from exceeding

the programmed speed.

The speed limiter cannot, in any cir-

cumstances, replace the need to com-

ply with speed limits or the need for

vigilance and responsibility on the part

of the driver.

To prevent the mat from

becoming caught under the pedals:

- ensure that the mat is positioned

correctly,

- never ﬁt one mat on top of another.

A maintained press decreases in steps

of 5 mph (5 km/h).

93

DRIVING

8

Reactivating the memorised speed

Cancelling the memorised speed

Speed limiter function

After cancellation, press button 4. Your

vehicle will return to the last memo-

rised speed. The display indicates

(e.g. at 70 mph (110 km/h)):

 When the vehicle is stationary, after

the ignition has been switched off,

the system no longer stores any

speed.

Operating check

In the event of a cruise control malfunc-

tion, the memorised speed is erased,

the dashes ﬂash for a few seconds:

Changing a memorised speed

To memorise a speed higher than the

previous one, there are two options:

Without using the accelerator:

 press button 3;

A brief press increases by 1 mph

(1 km/h).

A maintained press increases in steps

of 5 mph (5 km/h).

Using the accelerator:

 exceed the memorised speed until

the required speed is reached,

 press button 2 or 3.

To memorise a speed lower than the

previous one:

 press button 2;

A brief press decreases by 1 mph

(1 km/h).

This prevents the vehicle speed

exceeding the speed programmed by

the driver (minimum speed of 18 mph

(30 km/h)).

The operations must be carried out:

- while stationary, with the engine

running,

or

- while the vehicle is moving.

Contact a PEUGEOT dealer to have

the system checked.

Do not use the cruise control

on slippery roads or in heavy

trafﬁc.

On a steep descent or if you

accelerate sharply, the speed

limiter, which does not act on

the brakes, will not be able to

prevent the vehicle from exceeding

the programmed speed.

The speed limiter cannot, in any cir-

cumstances, replace the need to com-

ply with speed limits or the need for

vigilance and responsibility on the part

of the driver.

To prevent the mat from

becoming caught under the pedals:

- ensure that the mat is positioned

correctly,

- never ﬁt one mat on top of another.

A maintained press decreases in steps

of 5 mph (5 km/h).

93

DRIVING

8

Selecting the function

Pressing button 4 activates the limiter,

pressing this button again deactivates

it.

When the limiter is active, the display

indicates (e.g. at 70 mph (110 km/h)):

To re-activate the limiter, release the

accelerator to slow down to a speed

below the programmed speed.

 Place switch 1 in the LIMIT posi-

tion. The limiter is not yet active. By

default the display indicates:

Note: sometimes (on a steep

descent), the limiter may

not prevent the vehicle from

exceeding the programmed

speed, this speed ﬂashes.

Operating check

In the event of a limiter malfunction,

the memorised speed is erased, the

dashes ﬂash for a few seconds:

Switching the function off

Exceeding the programmed speed

 Place switch 1 in position 0 or

CRUISE or switch off the ignition

to switch the system off. The last

speed programmed remains in the

memory.

In exceptional situations, this method

can be used to exceed the pro-

grammed speed.

Pressing the accelerator to exceed the

programmed speed will have no effect

unless the pedal is pressed ﬁrmly to

the end of its travel (passing the point

of resistance).

Memorising a speed

A speed can be memorised without

activation of the limiter.

A brief press on buttons 2 and 3

decreases or increases by 1 mph

(1 km/h).Amaintainedpressdecreases

or increases the memorised speed

progressively in steps of 5 mph

(5 kmh).

The limiter is deactivated temporarily

and displays the speed which ﬂashes

(e.g. at 70 mph (110 km/h)):

Contact a PEUGEOT dealer to have

the system checked.

To prevent the mat from

becoming caught under the

pedals:

- ensure that the mat is posi-

tioned correctly,

- never ﬁt one mat on top of another.

Activation / deactivation of the

limiter

The activation is taken into account,

when the vehicle is moving, when the

vehicle speed is at least 5 mph (5 kmh)

below the stored speed.

94

Driving -> Cruise control / Speed limiter for Your Peugeot 607 4 Door First Generation (1999-2010)

Related Topics

Popular Owner Manuals

Latest Owner Manuals