PRACTICAL INFORMATION
10
4 - Direction indicators:
PY 21 W (amber).
CHANGING A BULB
Turn the bulb holder a quarter turn
and remove it.
Front lights
Remove the bulb and change it.
Refit the style cover.
Front foglamps: H1-55 W.
Note: in certain climatic con-
ditions (low temperature,
humidity), condensation on
the inside surface of the
headlamp glass is normal; it disap-
pears a few minutes after the lights
are switched on.
2 - Main beam headlamps:
H1-55 W.
Turn the protective cover of the
faulty bulb a quarter of a turn and
remove it.
In the engine compartment, remove
the style cover secured by one or two
butterfly screws, a plastic retainer clip
and two quarter turn screws.
On the left-hand side, remove the par-
tition by lifting it to gain access to the
lights.
Disconnect the connector.
Press the end of the securing clip
to free it. Change the bulb.
When fitting the new bulb, ensure
that the direction notches are
positioned correctly and the secur-
ing clip is fixed properly.
Handle the bulbs with a dry
cloth.
The headlamps are fitted with
polycarbonate glass with a
protective coating. Do not clean them
with a dry or abrasive cloth, nor with a
detergent or solvent product.
Use a soft, damp cloth with soapy
water.
When you have finished, do not forget
to put everything back correctly.
Reconnect the connector.
Refit the protective cover.
1 - Dipped beam headlamps:
H7-55 W or Xenon bulb.
3 - Side lights: W 5 W.
Pull the socket rearwards.
Remove the bulb and change it.
WARNING: RISK OF
ELECTROCUTION
Xenon bulbs must be replaced
by a PEUGEOT dealer.
108
English 
