28
INSTRUMENTS AND CONTROLS
INSTRUMENTS AND CONTROLS
A warning light continuously lit, or flashing with the engine running, is an indication of a malfunction in the relevant
unit. Some warning lights may be linked to buzzers and a message on the multi-function display. Do not ignore this
warning: contact a PEUGEOT dealer as quickly as possible.
If the central STOP warning light comes on when you are driving, stop immediately where it is safe to do so.
Central STOP warning light
This is linked to the "engine oil pressure", "coolant level low" and "brake fluid level" warning lights and the coolant
temperature gauge and puncture warnings, indicated by a message on the multi-function display.
It comes on each time the ignition is switched on.
Stop immediately.
Contact a PEUGEOT dealer.
Engine oil pressure warning light
This is linked to the central STOP warning light.
If it comes on with the engine running, it is accompanied by an audible signal and the message "Oil pressure low"
or "Top up engine oil" on the multi-function display.
Stop immediately.
In the case of a lack of oil in the lubricating circuit, top up the level.
Contact a PEUGEOT dealer without delay.
Low coolant level warning light (Diesel)
This is linked to the central STOP warning light.
It comes on each time the ignition is switched on.
Illumination of this warning light, with the engine running, is accompanied by an audible signal and the message
"Top up coolant" on the multi-function display.
Stop immediately.
Warning: allow the engine to cool before topping up.
The cooling system is pressurised.
To prevent the risk of scalding, unscrew the cap by two turns to allow the pressure to drop.
Once the pressure has dropped, remove the cap and top-up the level.
Contact a PEUGEOT dealer.
12-05-2003
English 
