Access
While the alarm is monitoring, any intrusion
triggers the siren for approximately
30 seconds, accompanied by lighting of the
direction indicators.
ALARM
Deactivation using the remote control
If your vehicle is fitted with an ANTI-THEFT
ALARM.
When this button is pressed,
the alarm is deactivated when
the vehicle is unlocked.
This provides:
The alarm then returns to monitoring mode
but the triggering event is stored and is
indicated by rapid flashing of the LED, if the
alarm is deactivated.
-
exterior perimeter protection by
detectors on the openings (doors,
bonnet) and on the electrical power
supply,
Deactivation of the anti-tilt
protection*
The alarm is also triggered following an
electrical supply cut-off, when the supply is
restored.
-
anti-tilt protection.
Press this control to deactivate
the protection (when towing the
vehicle with the alarm on, for
example).
The system also includes a siren and an
LED which can be seen from outside,
indicating the three possible states of the
alarm:
Automatic activation
The protection remains active until the doors
are unlocked with the central locking.
Depending on the country in which the
vehicle is sold: this function activates
monitoring automatically approximately
2 minutes after the last door is closed. To
avoid triggering the alarm when opening a
door, the unlocking button on the remote
control must be pressed again.
-
-
-
alarm activated (monitoring), slow
flashing of the red LED,
alarm not activated (not monitoring),
LED off,
Good practice
To deactivate the siren quickly following
unwanted triggering:
alarm triggered (intrusion signal), rapid
flashing of the red LED when the vehicle
is unlocked.
-
switch on the ignition, identification of
the key code will switch off the alarm,
-
press the unlocking button (cab and key)
on the remote control.
Activation of the alarm
Deactivation using the key
To avoid setting the alarm, when washing
the vehicle for example, lock the vehicle
using the key.
First ensure that all of the doors are closed
correctly.
Unlock the doors using the key and enter the
vehicle. Switch on the ignition, identification
of the key code will switch off the alarm.
The alarm is activated by
pressing this padlock, the
protection is active after a few
seconds.
Unlocking the vehicle using the remote
control deactivates the siren automatically.
* Depending on engine.
English 