Pneumatic suspension
Return to the optimum floor height
PNEUMATIC SUSPENSION
Manual adjustment of the loading
height
Press the same number of times in reverse
as the level of the position displayed.
If your vehicle is fitted with pneumatic
suspension, you can adjust the height of
the rear of the vehicle to make loading and
unloading easier.
Raise: upwards adjustment of
the load floor
Warning lamp
Refer to the "Instruments and controls"
section of chapter 2.
Press the control, release to
stop the movement. Each press
increases by one level: +1 to +3.
Good practice
Driving with the suspension set too high or
too low risks damaging components under
the body.
The control panel is located on the
dashboard.
Lower: downwards adjustment
of the load floor
You must avoid using this control in the
following circumstances:
Press the control, release to stop
the movement.
There is a nominal level as well as 6 height
adjustment levels, raising (from +1 to +3) or
lowering (from -1 to -3). Each level reached
is indicated on the instrument panel screen.
-
-
-
when working underneath the vehicle,
when changing a wheel,
Each press decreases by one
level: -1 to -3.
when the vehicle is being transported by
lorry, train, ferry, boat, ...
English 
