Get Audio / Video (4008) Guide for Peugeot Expert Van Second Generation (2007-2015)

04 AUDIO / VIDEO

RADIO, RDS, AF, REG, TP, PTY

WHAT IS RDS?

REGIONAL MODE

Some stations are organised in a network.

The Radio Data System (RDS) function on the FM waveband permits:

In different regions, they broadcast different or shared programmes

-

automatic retuning to alternative frequencies carrying the

same station while travelling through different regions (if the

transmitters of this station cover the area through which you are

travelling),

depending on the time of day.

You can follow:

-

a regional station only,

-

temporary tuning to trafꢀc information announcements,

display of the name of the station, etc ...

the entire network, with the possibility that you will be listening

to a different programme.

Most FM stations use RDS.

These stations transmit non-audible data in addition to their programmes.

TRAFFIC INFORMATION FUNCTION

The data transmitted in this way allows you access to various

functions, mainly displaying of the name of the station, temporary

tuning to trafꢀc information announcements or automatic retuning to

alternative frequencies.

RDS allows you to continue listening to the same station

automatically by means of alternative frequencies. However,

alternative frequencies may not be provided throughout the country.

Radio stations do not cover the whole country, which explains the

loss of reception of the station during a journey.

The Trafꢀc Programme (TP) function permits automatic and

temporary switching to an FM station broadcasting trafꢀc

information.

The radio station or the source that you are listening to at this point

is paused.

Once the trafꢀc information has ended, the system switches back to

the radio station or the source that you were listening to initially.

RDS ALTERNATIVE FREQUENCIES

PROGRAMME TYPES

Your radio automatically checks and selects the best frequency for

the radio station to which it is tuned (if the station broadcasts on

several transmitters or frequencies).

Some stations offer the option of listening to a themed type of

programme as a priority, selected from the list available below:

NEWS, AFFAIRS, INFOS, SPORT, EDUCATE, DRAMA, CULTURE,

SCIENCE, VARIED, POP M, ROCK M, EASY M, LIGHT M,

CLASSICS, OTHER M, WEATHER, FINANCE, CHILDREN,

SOCIAL, RELIGION, PHONE IN, TRAVEL, LEISURE, JAZZ,

COUNTRY, NATION M, OLDIES, FOLK M, DOCUMENT.

The frequency of a radio station covers approximately 30 miles

(50 km). The change from one frequency to another explains the

loss of reception during a journey.

If the station to which you are listening does not have several

frequencies in the region in which you are currently located, you can

deactivate automatic alternative frequencies.

236

04 AUDIO / VIDEO

INFORMATION DISPLAYED IN RADIO MODE

A

B

C

D

E

F

F. Display of 6 preset stations.

G. To receive the preset station.

Press and hold to store a station.

H. To change the frequency step by step.

N

M

L

Press and hold for continuous frequency

G

changing.

I. To search for currently broadcasting

stations which can be received in the

current location, until a station is found.

J. To display the programme type setting

screen, e.g.: sport, rock, classical, news, ...

Press PTY again to exit.

K

J

I

H

A. A preset number is displayed when a

preset station has been selected.

K. Press this button to display the secondary

menu.

B. The name of the station is displayed

L. REG is displayed during the reception of

regional frequencies information.

during the reception of RDS information. If

the station name has not been transmitted,

the frequency is displayed.

M. RDS is displayed during the reception of

RDS information.

C. Stereo is displayed when a stereo

N. TP is displayed when the trafꢀc

information is in standby mode.

transmission is received.

D. AF is displayed when the AF function is

on.

E. PTY (programme type) is displayed if the

RDS information received is displayed.

TRAFINF is displayed, during an

interruption, for trafꢀc information.

ALARM is displayed, during an

interruption, for urgent information.

237

04 AUDIO / VIDEO

RADIO, SELECTING AN FM STATION AND PRESETTING

Press

Explanation

Result

Press the MODE button.

Press FM. By default the screen shows the FM1 stations.

Press [ꢂ Tune] to decrease the frequency or [Tune ꢃ] to increase the frequency. The

frequency is changed in steps of 0.1 MHz.

Continue to press to tune to a station automatically.

You can select [ꢀSeek] or [Seek ꢁ] to start a continuous search until the

stations which can be received in the current location are detected.

You can also start a search by type of programme by pressing [PTY].

Once the frequency has been selected, a long press on the station (e.g. 3) will preset it.

The name of the station is displayed if it is available.

You can start automatic presetting on FM3 for 6 stations, which can be

received in the current location, by pressing [^] then [Auto-Store].

238

04 AUDIO / VIDEO

RADIO, RDS SETTINGS

Press

Explanation

Result

Press the MODE button.

Press FM. By default the screen shows the stations on FM1.

Press [^].

Press [RDS Settings].

Press [On] or [Off] to activate or deactivate the functions:

-

AF: automatic search for the best frequency,

REG: switch to the regional frequencies,

TP: automatic selection of stations broadcasting trafꢀc information.

239

04 AUDIO / VIDEO

CD PLAYER

The recording speed may be slower than 4x due to the processing

load on the equipment or the condition of the audio CD.

If jumps or other errors occur, return to the beginning of the track

and start the recording again.

Your Audio-Telematic system allows you to listen to audio CDs

(CDDA, CD-Text, CD-R/RW) or MP3 and WMA CDs.

Even if there is no gap between the tracks on the CD, a brief silence

between tracks is stored on the hard disk.

PLAYING AN AUDIO CD

When the audio CD is inserted in the player,

playing of the tracks is automatic and they can be

recorded onto the hard disk.

WHAT IS THE GRACENOTE CDDB?

The title information for the track currently being played

can be obtained from the "Gracenote CDDB" database

stored on the hard disk.

Simultaneous access to the music recognition

service "Gracenote CDDB" on the hard disk permits display of the

title information.

The Gracenote company uses this standard to identify

the music and the associated information such as:

RECORDING ONTO THE MUSIC SERVER

-

the title of the album,

the name of the artist,

the title of the tracks,

the genre, ...

The tracks of audio CDs (not MP3/WMA) can be recorded

onto the hard disk at approximately 4x speed

(e.g.: 60 minutes converted to 15 minutes) and stored on

the music server.

For further details, consult the site: www.gracenote.com.

The Gracenote CDDB database incorporated in this equipment

cannot guarantee the content of the data 100%. You can update this

database using a DVD sold separately.

The sounds recorded may be altered by the noise present and the

quality of the sound may differ from the original.

The tracks recorded on the music server cannot be reproduced on

another medium (CD-R/RW, HDD, etc...).

Previously recorded tracks cannot be recorded again from the same

COPYRIGHT

CD.

Switching off the engine or removing the CD during recording will

result in the tracks being faulty.

Your Audio equipment may allow you to listen to music which is

usually protected by copyright in accordance with current national

and international standards. Please consult these standards and

comply with them.

The operation of the navigation system may slow down during

recording.

240

04 AUDIO / VIDEO

INFORMATION DISPLAYED IN CD MODE AND COPYING A CD

A

B

C

H. Displays the number and the name of the

track. While driving, they are not available

and cannot be selected.

D

E

K

J

I. To display the secondary menu.

J. Move the cursor onto the track currently

being played.

F

K. The number and the name of the track

currently being played are displayed.

I

H

G

L

A. The name of the album is displayed for the

track currently being played.

M

B. The name of the artist is displayed for the

album currently being played.

C. The playing time of the track currently

being played is displayed.

The CD button is only active if the player

contains a CD.

D. The playing mode currently selected is

displayed.

L. During copying, this symbol is displayed

in red and it goes off when all copying

operations are complete. The number

indicates the percentage of the total

number of tracks on the CD already

copied onto the hard disk. 00% when only

one track has been copied.

E. Position of the cursor and total number of

tracks on the album.

F. Displays the item currently selected.

G. To scroll up or down through the tracks.

Press and hold for fast backwards or

forwards playing of a track.

M. The tracks which have not been copied

are displayed in blue.

No symbol is displayed for tracks for

which copying has ꢀnished.

Press Open to return the screen to the vertical

position.

241

04 AUDIO / VIDEO

PLAYING A CD

Press

Explanation

Result

Press the MODE button then CD, if the player already contains a CD.

Otherwise, insert a CD in the player, play begins automatically.

Selecting a track

Press [ꢂ Track] to select the previous track or return to the beginning of the track

currently being played.

Press and hold for fast backwards play.

Press [Track ꢃ] to select the next track.

Press and hold for fast forwards play.

Changing the play mode

Press [^] to access the secondary menu.

Press [Repeat] to play the track in a loop (repetition).

Press [^] then [Repeat] to stop.

Press [Scan] to play the beginning of each track for approximately 9 seconds (scan).

Press [^] then [Scan] to stop or press the current track (during the 9 seconds) and play

begins.

Press [Random] to play the tracks in random order. Press [^] then [Random] to stop.

242

04 AUDIO / VIDEO

COPYING A CD ONTO THE MUSIC SERVER (1/3)

Press

Explanation

Automatic copying of all of the tracks

Result

All of the tracks are copied automatically when a CD is inserted.

This automatic copy is programmed by default on leaving the factory.

If you have changed the copy mode (manual or ꢀrst track), while a CD is being played

press [^] for access to the secondary menu.

Press [REC. Setting].

Press [Auto REC.] and conꢀrm by pressing [Back].

Next, eject the CD currently being played then insert a CD and copying of all of the

tracks begins.

If you wish to copy the CD which is currently being played, press [^] for access to the

secondary menu and press [REC. Start].

If another track (already copied) is selected during copying, the copying continues and

the new track selected is played.

If another track (not copied) is selected, the copying which is in progress stops and the

copying of the new track selected begins. This track is played during copying.

243

04 AUDIO / VIDEO

COPYING A CD ONTO THE MUSIC SERVER (2/3)

Press

Explanation

Manual copying of individual tracks

Result

You can copy the tracks manually, one by one.

After inserting a CD and while it is being played, press [^] for access to the secondary

menu.

Press [REC. Setting].

Press [Manual REC.] and conꢀrm by pressing [Back].

Once the manual programming has been carried out, select the track to be copied then

press [^].

Press [REC. Start], the copying of the track selected begins.

If another track is selected during copying, the copying stops and the new track selected is

played.

244

04 AUDIO / VIDEO

COPYING A CD ONTO THE MUSIC SERVER (3/3)

Press

Explanation

Automatic copying of the ꢀrst track

Result

You can programme the automatic copying of the ꢀrst track when a CD is inserted.

After inserting a CD and while it is being played, press [^] for access to the secondary

menu.

Press [REC. Setting] then [Single REC.] and conꢀrm by pressing [Back].

Next, eject the CD which is currently being played then insert a CD and the copying of

the ꢀrst track begins.

If you wish to copy the ꢀrst track of the CD which is currently being played, press [^] for

access to the secondary menu and press [REC. Start].

If another track is selected during copying, the copying stops and the track selected is

played.

Stopping automatic or manual copying

During the copying of a CD or of a track on a CD, press [^] for access to the secondary

menu.

Press [REC. Stop], the copying stops.

245

04 AUDIO / VIDEO

GENERAL NOTES ON THE MUSIC SERVER

WHAT IS THE MUSIC SERVER?

Your Audio-Telematic system allows you to copy audio CDs onto a

music server, up to 2,500 songs on a 10 Gb hard disk.

The tracks on audio CDs (not MP3 or WMA) can be recorded onto

the hard disk at approximately 4x speed and stored in the music

server.

Refer to the "Recording a CD" section.

The music server then allows you to manage groups and lists of

tracks.

246

04 AUDIO / VIDEO

"NEW GROUP" GROUP FOR THE USER, NUMBERS 03

TO 99:

"ORIGINAL" GROUP, NUMBER 01:

This is the location of the original playlist created

This is the location of the user's playlists.

You can record up to 9999 playlists in this group.

The group can be created, renamed or deleted.

automatically (not manual) when a track of an

audio CD is recorded.

It is not possible to change its name or delete it.

You can record up to 9999 playlists in this group.

"MY BEST" GROUP, NUMBER 02:

"ORIGINAL PLAYLIST" LISTS:

These are original playlists created automatically

(not manual) when an audio CD is copied.

This is the location of the playlists, etc ... created

automatically from the information read in the

music server.

The lists and the artists can be renamed or

deleted. The genres can also be set.

It is not possible to change its name or delete it.

The groups "My Favorites" and "My Frequency" are stored here.

247

04 AUDIO / VIDEO

"MY FAVORITES" LIST:

"USER PLAYLIST" LIST:

This is the location for storing your favourite

This is the location of a playlist of tracks selected

tracks.

by the user from the original list.

They can be deleted from the list and the order in which they are

If you delete a track from the original list, it will be

played can be changed.

deleted from the user list.

The list and the artist can be renamed or deleted.

It is possible to add tracks or change their order.

"MY MOST PLAYED" LIST:

This is the location of the playlists used most

frequently from the original list.

It is not possible to add tracks or change their order.

248

04 AUDIO / VIDEO

INFORMATION DISPLAYED IN MUSIC SERVER MODE

A

B

C

D

G. To display the list of groups, the playlist

and the list of tracks.

H. To scroll up or down through the tracks.

E

F

Press and hold for fast backwards or

G

M

L

forwards playing of a track.

I. To scroll up or down through the playlists.

J. Group lists: number and name of the

group.

Playlists: number and name of the playlist.

Track lists: number and name of the track.

K. To display the secondary menu.

K

J

I

H

L. Displays the item currently selected.

A. The number and the name of the track

currently being played are displayed.

M. Move the cursor onto the track currently

being played.

B. The number and the name of the playlist

currently being played are displayed.

C. The name of the artist is displayed for the

playlist currently being played.

D. The playing time of the track currently

being played is displayed.

E. The playing mode currently selected is

displayed.

F. Group lists: position of the cursor and total

number of groups.

Playlists: position of the cursor and total

number of playlists.

Track lists: position of the cursor and total

number of tracks.

249

04 AUDIO / VIDEO

PLAYING A TRACK OR A PLAYLIST IN THE MUSIC SERVER

Press

Explanation

Result

Press the MODE button then Music Server.

The playlists are played in a loop.

The server can play a track while recording another track from a CD. You must wait

until recording is complete before playing the recorded track.

Selecting a track

Press [ꢂ Track] to select the previous track or return to the beginning of the track

currently being played.

Press and hold for fast backwards.

Press [Track ꢃ ] to select the next track.

Press and hold for fast forwards.

Selecting a playlist

Press [ꢀ Playlist] to select the previous playlist.

Press [Playlist ꢄꢁ] to select the next playlist.

Press these buttons to switch between groups, playlists and tracks.

You cannot switch directly from groups to tracks.

250

04 AUDIO / VIDEO

CREATING A GROUP AND A PLAYLIST IN THE MUSIC SERVER

Press

Explanation

Result

Creating a group

Press [^] to access the secondary menu.

Press [New Group], enter the name of the group and press [SET].

The group is stored on the server.

Creating a playlist

Press [^] to access the secondary menu then press [Function Settings].

Press [New Playlist].

Select the group to which the playlist is to be attached. The group must be created ꢀrst.

Enter the name of the playlist and conꢀrm by pressing [SET].

Then select the search method attached to this new list (either from the list or by

conditions).

The list is stored on the server.

251

04 AUDIO / VIDEO

GENERAL NOTES ON MP3/WMA CDS

Windows Media and Microsoft Corporation are trademarks

registered in the United States and/or other countries.

PLAYING AN MP3/WMA CD

When the MP3/WMA CD is inserted in the player,

playing of the tracks is automatic.

The tracks cannot be recorded onto the music server.

ACCEPTANCE OF THE FILES

You can play CDs with up to 8 levels, 255 folders and

400 ꢀles maximum.

Some blank CDs may not be played by your equipment (quality,

recording speed...).

When you burn a CD-R or CD-RW, select the ISO 9660 level 1.2 or

WHAT IS THE MP3/WMA FILE FORMAT?

Joliet burning standard.

To obtain the best acoustic quality possible, select the lowest

burning speed.

The MPEG1 and MPEG2 standards are accepted.

MP3 is the abbreviation of MPEG-1 Audio Layer 3 and

MPG is the abbreviation of Motion Pictures Experts

Group, a digital video data compression standard used on media

such as video CDs.

Transmission speeds between 32 and 320 kbits/s and scans

between 16 kHz and 48 kHz are accepted.

The MP3 compression reduces the number of bytes in a song by

eliminating the long sound waves in the range of frequencies which

are imperceptible to the human ear, so producing high quality audio

ꢀles with a low volume of data.

To display the title information (the name of the artist, the title of the

album, etc...), the information contained in the ID3 Tags or the WMA

Tags must be included in the MP3/WMA ꢀles burned onto the disc.

This compression divides the size of the content of a conventional

audio CD by approximately 10, which means that the content of

10 audio CDs can be recorded onto a single CD-R or CD-RW.

COPYRIGHT

WMA is the abbreviation of Windows Media Audio, another audio

data compression standard offered by Microsoft.

It can be used to create and save audio ꢀles at a compression rate

higher than that of the MP3 format.

Your audio system may allow you to listen to music which is usually

protected by copyright in accordance with current national and

international standards. Please consult these standards and comply

with them.

252

04 AUDIO / VIDEO

INFORMATION DISPLAYED IN MP3/WMA CD MODE

A

B

C

D

H. Displays the item currently selected.

I. To scroll up or down through the tracks.

E

F

N

Press and hold for fast backwards or

forwards playing of a track.

G

J. To scroll up or down through the folders.

M

K. Displays the folder number and the folder

name. Plus the lists and numbers of

tracks and the name of the ꢀle (without

extension).

H

L. To display the secondary menu.

L

K

J

I

M. Move the cursor onto the track currently

being played.

N. Displays the type of medium, MP3 or

WMA.

A. The number and the name of the track

currently being played are displayed.

B. The name of the album/folder is displayed

for the track currently being played.

C. The name of the artist is displayed for the

track currently being played.

The CD button is only active if the player

contains a CD.

D. The playing time of the current track is

displayed.

E. The playing mode currently selected is

displayed.

F. Position of the cursor and total number of

folders or tracks on the current level.

G. To display the list of folders of a higher

level.

Press Open to return the screen to the vertical

position.

253

04 AUDIO / VIDEO

PLAYING AN MP3/WMA CD (1/2)

Press

Explanation

Result

Press the MODE button then CD, if the player already contains a CD.

Otherwise, insert a CD in the player, play begins automatically.

Moving around the folders

You can move by one level at a time.

Press on the name of a folder and at each press the list of folders of the level below is

displayed.

These displays indicate the current level:

CD: level 0, folder below: level, folder below that, level 2, etc ...

Up to 8 levels.

Press on the folder above to move up and/or select a level.

Selecting a folder

Press [ꢀ Folder] to select the previous folder.

Press [Folder ꢁ] to select the next folder.

254

04 AUDIO / VIDEO

PLAYING AN MP3/WMA CD (2/2)

Press

Explanation

Result

Selecting a track

Press [ꢂꢄTrack] to select the previous track or return to the beginning of the track

currently being played.

Press and hold for fast backwards play.

Press [Track ꢃ] to select the next track.

Press and hold for fast forwards play.

Changing the playing mode

Press [^] to access the secondary menu.

Press [Repeat] to play the track selected in a loop (repetition).

Press [Repeat] again to play all of the tracks in the selected folder in a loop.

Press again to stop.

Press [Scan] to play the beginning of each track in each folder for approximately

10 seconds (scanning).

Press [Scan] again the play the beginning of each track in the selected folder in a loop.

Press again to stop or press on the current track (during the 10 seconds) and play

begins.

Press [Random] to play all of the tracks in the selected folder in random order.

Press [Random] again to play all of the tracks on the CD in random order.

Press again to stop.

255

04 AUDIO / VIDEO

INFORMATION DISPLAYED IN DVD MODE

A

B

C

D

E

J. To play the previously selected zone on

the disc.

K. To display the DVD title menu.

L. To scroll up or down through the chapters.

F

G

H

I

R

Q

P

Press and hold for fast backwards or

forwards play.

O

N

M. To scroll up or down through the titles.

N. To enter a title or chapter number.

O. To change the angle.

J

P. To change the language of the subtitles.

Q. To change the language.

M

L

K

R. To select a chapter or title or specify a

A. This icon is displayed when the operation

requested cannot be carried out.

number.

B. The number of the chapter currently being

played is displayed.

C. The number of the title currently being

played is displayed.

D. Symbols display the current status of the

The DVD button is only active if the player

contains a DVD.

player.

E. The playing time is displayed.

F. To resume normal play when play is

paused or during slow-motion play.

G. To stop play temporarily.

H. To stop play. Press the screen to access

For safety reasons, the video is not

displayed while driving, however the audio

can be played.

the menu.

I. For slow-motion play.

To display the picture and watch a DVD,

park the vehicle in a safe place.

Press Open to return the screen to the vertical

position.

256

04 AUDIO / VIDEO

PLAYING A DVD

Press

Explanation

Result

Press the MODE button then DVD, if the player already contains a DVD.

Otherwise, insert a DVD in the player, the picture is displayed

automatically. Press the screen to access the menus.

While driving, only the soundtrack is played and no picture is displayed.

Selecting a chapter

Press [ꢂ Chapter] to select the previous chapter or return to the beginning of the

chapter currently being played.

Press and hold for fast backwards play.

Press [Chapter ꢃ] to select the next chapter.

Press and hold for fast forwards play.

Selecting a title

Press [ꢄꢀ Title] to select the previous title.

Press [Title ꢁ] to select the next title.

257

Audio / Video (4008) for Your Peugeot Expert Van Second Generation (2007-2015)

Related Topics

Popular Owner Manuals

Latest Owner Manuals