Get GPS Manual for 208 Guide for Peugeot Expert Van Second Generation (2007-2015)

01. for 208

Touch screen

SATELLITE NAVIGATION SYSTEM

MULTIMEDIA AUDIO SYSTEM

BLUETOOTH TELEPHONE

CONTENTS

01 First steps - Control panel

02 Steering mounted controls

03 General operation

p. 212

p. 213

p. 214

p. 216

The system is protected in such a way that it will only

operate in your vehicle.

04 Navigation:

navigation guidance, traffic,

map, settings

05 Media:

p. 234

p. 248

photos, radio, music, settings

06 Communication:

bluetooth, contacts, call log,

For safety reasons, the driver must carry out operations

which require prolonged attention while the vehicle is

stationary.

settings

When the engine is switched off and to prevent

discharging of the battery, the system switches off

following the activation of the energy economy mode.

07 Settings:

p. 258

p. 264

system, vehicle, sound

Frequently asked questions

211

01 FIRST STEPS

Selection of the audio source (depending on version):

-

"FM" / "AM" radio wavebands.

"USB" memory stick.

CD (located in the glove box)*.

Telephone connected by Bluetooth and streaming.

Media player connected to the auxiliary socket (jack, cable not supplied).

Volume adjustment (each

source is independent,

including TA messages and

navigation instructions).

Press to mute the sound.

MODE: selection of the type

Use the zones suggested in the

screen using a ꢀnger.

of permanent display.

Selection of the "MAIN MENU":

-

"Navigation" for navigation settings and to select a destination (depending

on version).

To clean the screen, use

a soft non-abrasive cloth

(spectacles cloth) without

any additional product.

"Media" to select radio, MP3 music (from a USB memory stick), view

photos.

"Communications" to connect a telephone by Bluetooth so as to make

telephone calls securely or connect to the Internet.

"Settings" to enter settings for the radio, the vehicle or audio.

Press MENU again to quit the "MAIN MENU" and return to the permanent

display.

* Depending on equipment.

212

02 STEERING MOUNTED CONTROLS

-

Rotation.

Radio: automatic selection of next /

-

Press: mute / restore sound.

Increase volume.

previous frequency.

Media: previous / next track.

Menus: movement

Press.

Radio: pre-set radio stations.

Menus: conꢀrm.

-

Incoming call: answer call.

Call in progress:

Telephone menu (contacts, call

Decrease volume.

log).

End call.

-

Press: change the audio source:

Radio, Media.

-

Radio: display the list of stations.

Media: display the list of albums /

Successive presses: navigation in

tracks.

the menus.

213

03

GENERAL OPERATION

Press MODE several times in succession for access to the following displays:

"Radio"

(or audio source being

listened to: CD, USB,

Auxiliary)

"Trip computer"

(refer to the "Instruments

and controls" section)

OR

"Map"

"Telephone"

(if call in progress)

(if navigation guidance in

progress)

214

03

GENERAL OPERATION

Entry keypads (examples)

Return to the

previous screen.

Delete a character.

Conꢀrm at the end of

each entry.

Area with choices which can

vary according to the information

memorised in the audio system.

Every time this arrow appears, press the area in question.

215

04 NAVIGATION

A31

A32

A31

Press MENU.

A31

A41

For managing contacts and

their addresses, refer to the

"Communication" section.

A42

A

A1

A2

To use the telephone functions,

refer to the "Communication"

section.

A51

A3

A4

A5

A6

A7

A8

Press

"Navigation".

A52

A81

A82

A83

A84 A85

216

"Guide"

A3 - Choose the settings for calculation of the route.

A31 - Choose the navigation criteria: "Fastest", "Shortest", "Time/

Distance compromise", "Include tollroads", "Include ferries",

"Pass close to waypoints".

Access to the "Navigation" menu

The map displays the route deꢀned in line with the criteria.

A32 - Display the map and start navigation.

"Navigation"

A1 - List of recent destinations. Select an address and press

"Address"

A4 - Enter an address.

"Calculate route" to start navigation.

A2 - Press the map to display it full screen.

A41 - Enter the country, city, address or the longitude/latitude

coordinates.

A6 - Display the map and zoom to view the routes.

A7 - Create, add/delete a waypoint or view the itinerary.

A42 - Having chosen an address, press to calculate the route.

"Contacts"

A5 - Choose an address.

A51 - Select a contact in the list.

A52 - Having chosen a contact, press to calculate the route.

On the map

Press an icon for additional information

and menu shortcuts.

"Settings"

A8 - Set your preferences.

A81 - Retain the calculation criteria in memory.

A82 - Detour from your initial route for a certain distance.

A83 - Activate risk area alerts.

A84 - Choose the volume for the voice and the announcement of street

names.

A85 - Display the mapping version.

217

NAVIGATION

04

Press MENU.

Having made your

choices, conꢀrm to save

the modiꢀcations.

B2

B1

B3

B4

B5

B

C

Press

"Navigation".

C1

C2

Moving between the two

menus.

C3

C4

C5

218

Access to the "Navigation" menu (continued)

"Audio settings / Voice synthesis"

B4 - Choose the volume for the voice and for announcing street

names.

"Trafꢀc"

B1 - List of trafꢀc information messages.

B2 - Select the map or the descriptive information.

B3 - Reꢀne the list of trafꢀc information on the route, within a radius

"TRAFFIC INFORMATION SETTINGS"

of 30 miles (50 km) or at the destination.

B5 - Set the choice of messages and the radius ꢀlter.

"Map heading"

C3 - Choose the map display in perspective or ꢁat, then North

orientation or in the direction of the vehicle (for ꢁat display).

"SEARCH FOR POINTS OF INTEREST"

C1 - List of categories available.

C2 - Having chosen the category, select the points of interest.

"Map colour"

C4 - Choose map display in day, night or automatic mode (making

use of the vehicle's sunshine sensor).

219

04 NAVIGATION - GUIDANCE

CHOOSING A DESTINATION

Select "Guide".

TOWARDS A NEW DESTINATION

Choose the navigation criteria: "Fastest" or the

"Shortest" or "Time/Distance compromise".

The route is displayed in the map (on the right).

Press MENU to display the "MAIN MENU" then

select "Navigation".

Choose the restriction criteria: "Tollroads",

"Ferries", "Near".

Select "Navigation GPS".

Select "Address".

Select "Conꢀrm" or press the screen (blue

arrow) to start navigation guidance.

Select the "Country" from the list offered then

in the same way:

To delete navigation information, press on

"Settings" then "Stop navigation".

the "City" or its post code, the "Street",

the "N°". Conꢀrm each time.

Select "Save" to save the address entered as a contact entry.

The system allows up to 200 entries.

To restore the navigation information press on

"Settings" then "Restart navigation".

220

04 NAVIGATION - GUIDANCE

TOWARDS ONE OF THE RECENT DESTINATIONS

TOWARDS A CONTACT

Navigation towards a contact imported from a telephone is only

possible if the address entered is compatible with the system.

Press MENU to display the "MAIN MENU" then

select "Navigation".

Press MENU to display the "MAIN MENU" then

select "Navigation".

Select "Navigation GPS".

Select "Contacts".

Select an address from the list offered.

Select "Guide".

Select the criteria then "Conꢀrm" or press the

screen (blue arrow) to start guidance.

Select a destination from the contacts in the list

offered.

Select "Navigate to".

Select the criteria then "Conꢀrm" to start

guidance.

221

04 NAVIGATION - GUIDANCE

TOWARDS GPS COORDINATES

TOWARDS A POINT ON THE MAP

Press MENU to display the "MAIN MENU" then

select "Navigation".

Press MENU to display the "MAIN MENU" then

select "Navigation".

Select "Navigation GPS".

Select "From map".

Select "Navigation GPS".

Select "Address".

Enter the "Longitude" then the "Latitude".

Select "Guide".

Zoom in on the map then select the point.

A long press displays the surrounding tourist

attractions.

Select the criteria then "Conꢀrm" or press the

screen (blue arrow) to start guidance.

222

04 NAVIGATION - GUIDANCE

Points of Interest (POI) show all of the locations of services nearby (hotels,

retail outlet, airports, ...).

TOWARDS POINTS OF INTEREST (POI)

Press MENU to display the "MAIN MENU" then

select "Navigation".

Select the points of interest from the list offered.

Select "Search".

Select "Navigation GPS".

Select "Address".

or

Select "Along the route" or "Near" or "At a

destination" or "At an address" to ꢀlter the

points of interest.

Select a point of interest from the list offered.

Select "Pts of Interest".

Select "Guide".

Select a category from the list offered (the

categories are presented on following pages).

Select the criteria then "Conꢀrm" to start

guidance.

223

04 NAVIGATION - GUIDANCE

LIST OF MAIN POINTS OF INTEREST (POI)

Public transport

Business centres

Restaurants

Rest areas

Service stations

Shopping centres

Hotels

The detailed procedure for updating POIs can be found at "http://peugeot.navigation.com".

224

04 NAVIGATION - GUIDANCE

RISK AREA ALERT SETTINGS

Press MENU to display the "MAIN MENU" then

select "Navigation".

It is then possible to activate risk area alerts, then choose:

"With audible alert"

-

"Warnings only when navigating"

"Alert setting": the choice of timing allows the time before giving

a speed camera alert to be deꢀned.

Select "Navigation GPS".

Select "Settings".

Select "Conꢀrm".

These functions are only available if risk areas have been

downloaded and installed on the system.

Select "Risk areas".

225

04 NAVIGATION - GUIDANCE

ADDING A WAYPOINT

ORGANISING WAYPOINTS

Press MENU to display the "MAIN MENU" then

select "Navigation".

To organise waypoints, carry out the previous operations 1 to

3 again (Adding a waypoint).

Select "Navigation GPS".

Select the waypoint that you want to move in

the order.

Select "Waypoints".

Select "Add".

Select "Up".

Select "Down".

Select "Delete".

Select "Address".

The address of the waypoint is entered in

the same way as a destination, so enter

the "City" or post code, the "Street" and

the "N°". Conꢀrm each time.

Then select "As waypoint".

Select "Guide".

Select the criteria then "Conꢀrm" to start

guidance and give the general direction of the

navigation route.

Select "Roadmap" to view the changes made

to the route.

226

04 NAVIGATION - GUIDANCE

ROUTE OPTIONS

CALCULATION CRITERIA

Press MENU to display the "MAIN MENU" then

select "Navigation".

It is then possible to choose:

-

the navigation criteria: "Fastest", "Shortest", "Time/Distance

compromise",

-

the exclusion criteria: "Include tollroads", "Include ferries",

"Pass close to waypoints", "Take trafꢀc into account".

Select "Navigation GPS".

Select "Settings".

Select "Criteria".

Select "Conꢀrm".

227

04 TRAFFIC

TRAFFIC INFORMATION

SETTING FILTERS

DISPLAY OF MESSAGES

Press MENU to display the "MAIN MENU" then

select "Navigation".

Press MENU to display the "MAIN

MENU" then select "Navigation".

Select "Trafꢀc".

Select "Settings".

Set the "Along the route", "Near", "Around"

ꢀlters to ꢀne-tune the list.

Select:

Press again to remove the ꢀlter.

-

"Warn of new messages",

"Trafꢀc messages only",

"All messages".

Then enter the ꢀlter radius.

Select the message from the list offered.

Select "Map" or "Details" for more information.

Select "Conꢀrm".

TMC (Trafꢀc Message Channel) messages contain information on

trafꢀc and weather conditions, received in real time and transmitted

to the driver in the form of audible announcements and symbols on

the navigation map.

We recommend a ꢀlter radius of:

-

12 miles (20 km) in urban areas,

30 miles (50 km) on motorways.

228

04 TRAFFIC

RECEIVING TA MESSAGES

MAIN TRAFFIC SYMBOLS

Red and yellow triangle: trafꢀc information, for example:

Press the MODE until the "RADIO" display is

obtained.

Modiꢀed signs

Slippery surface

Delay

Narrow carriageway

Accident

Select "TA".

Roadworks

Road closed

Danger

Risk of explosion

Demonstration

No entry

Select "Trafꢀc announcements (TA)".

Select "Conꢀrm".

Trafꢀc jam

Black and blue triangle: general information, for example:

Weather reports

Wind

Trafꢀc reports

Fog

The TA (Trafꢀc Announcement) function gives priority to TA alert

messages. To operate, this function needs good reception of a

radio station transmitting this type of message. When a trafꢀc report

is transmitted, the current audio source (Radio, CD, USB, ...) is

interrupted automatically to play the TA message. Normal playback

of the audio source resumes at the end of the transmission of the

message.

Parking

Snow / ice

229

04 TRAFFIC

DIVERSION FROM A ROUTE

Press from MENU to display the "MAIN MENU"

then select "Navigation".

Select the diversion distance by pressing + or -.

Select "Recalculate route". The route

Select "Navigation GPS".

Select "Settings".

will be modiꢀed in time and distance.

Select "Conꢀrm".

The route may be diverted following the reception of a trafꢀc

information message.

Select "Diversion".

230

04 MAP

MAP MANAGEMENT

SELECTING THE POINTS OF INTEREST DISPLAYED ON

THE MAP

Select the points of interest from the list for

them to be displayed in the screen.

Press MENU to display the "MAIN MENU" then

select "Navigation".

Select "Conꢀrm".

Select "Map".

Select "Points of Interest".

Select a category from the list offered (the

categories are given on previous pages).

231

04 MAP

MAP ORIENTATION

MAP COLOUR

Press MENU to display the "MAIN MENU" then

select "Navigation".

Press MENU to display the "MAIN MENU" then

select "Navigation".

Select "Map".

Select "Map heading".

Select "Map colour".

Select:

-

"Automatic day/night mode" to have

the brightness of the map adjusted

Select:

automatically according to the ambient light

level, using the vehicle's sunshine sensor,

-

"Flat map view" to display the map in 2D,

"Perspective map view" to display a

-

"Map in daytime mode" to have the map

perspective view.

always in day mode,

With "Flat map view":

"Map in night time mode" to have the map

-

"North heading" to keep the map always

always in night mode.

North up,

Then "Conꢀrm" to save the modiꢀcations.

-

"Vehicle heading" to have the map follow

the direction of travel,

Then "Conꢀrm" to save the modiꢀcations.

Street names are visible on the map from the 100 m scale.

232

04 SETTINGS

NAVIGATION SPEECH SYNTHESIS

VOLUME / STREET NAMES

Press MENU to display the "MAIN MENU" then

select "Settings".

Select "Audio".

Select "Voice".

Adjust "Voice synthesiser volume" and/or "State street names"

(spoken during navigation guidance).

Select "Conꢀrm".

233

MEDIA

05

Press MENU.

After making your choices,

conꢀrm to save the

modiꢀcations.

A1

A2

A3

A4

A5

A6

A

B

B22

B21

Press

"Media".

B1

B2

B3

B4

B5

234

Access to the "Media" menu

"Memory"

A4 - List of pre-set (memorised) radio stations. Press a radio station

"Radio"

to select it.

A1 - List of radio stations available and description of the station

selected. Press twice to receive the radio station.

A2 - Enter the frequency of the radio station desired.

A3 - Update the list with the stations currently received.

"Settings"

A6 - Activate trafꢀc announcements (TA), alternative frequencies

(RDS), radio text, travel information, general information,

programme information, alert ꢁashes.

A5 - Adjust the sound distribution in the vehicle, audio ambiences,

sound effects, voice synthesis, telephone ringtones.

"Album selection"

B2 - Choose an album using the sleeve displayed.

"Music"

B21 - Press twice on the sleeve to display the list of albums in text

format.

B1 - List of folders or ꢀles available.

Select ꢀles using the ꢂꢀor ꢃarrow.

B22 - Press to change the source (CD, USB, auxiliary).

B3 - Classiꢀed by folder, playlist or genre-artist. Press twice on the

folder to go down a level. Press ꢀꢁꢀor the back button to go up a

level.

B4 - Adjust the sound distribution in the vehicle, audio ambiences,

"Play options"

B5 - Set random or repeat play.

sound effects, voice synthesis, telephone ringtones.

Amplify the auxiliary source to increase the sound level.

235

05 MEDIA

Press MENU.

C

C1

C2

C3

C4

C5

C6

Press

"Media".

C61

C62

236

Access to the "Media" menu (continued)

"Photo selection"

C2 - Choose a photo from a preview.

"Photo"

C1 - List of photographs available on a USB memory stick (not

supplied, 2 GB maximum).

C3 - Display the selected photo full screen.

C4 - Rotate the photo 90°.

C5 - Select all the photos in the list.

Press again to deselect them.

"Slideshow"

C6 - Display the photos in succession in full screen.

C61 - Press ꢂꢀor ꢃꢀto choose the previous or next photo.

C62 - Press pause/play to stop/start the slideshow.

237

05

RADIO

SELECTING A STATION

OR

Press MENU to display the "MAIN MENU" then

select "Media".

Press the MODE button until the RADIO is

displayed.

Select "Radio".

If necessary, select changing the source.

Select "FM Radio" or "AM Radio".

Select a radio station from the list offered.

Select "Update" to refresh the list.

The exterior environment (hills, buildings, tunnel, car park, below ground...) may prevent reception, even in RDS station tracking mode.

This phenomenon is normal in the propagation of radio waves and is in no way indicative of a fault with the audio system.

238

05 RADIO

CHANGE A RADIO FREQUENCY

OR

Press MENU to display the "MAIN MENU" then

select "Media".

Select changing source.

Select "FM Radio" or "AM Radio".

Select "Radio".

By alphabetical list

Press the current radio band then

choose the radio station from the list

offered.

By manual frequency search

Press "Frequency", the enter the frequency

using the keypad and conꢀrm.

By automatic frequency search

Press ꢂꢀor ꢃꢀto move the cursor for

an automatic search down or up for a

radio frequency.

239

05 RADIO

PRESET A STATION

Select a radio station or frequency

(refer to the corresponding section).

From the permanent display, press "Memory".

Select a number in the list to preset the

previously chosen radio station.

A long press on this number presets the station.

Recall pre-set stations

Press MENU to display the "MAIN MENU" then

select "Media".

Select "Radio".

Select "Memory".

240

05 RADIO

ACTIVATE / DEACTIVATE RDS

Press the MODE button until the RADIO /

MEDIA display is obtained.

Select "RDS".

Select Alternative frequencies (RDS).

Select Conꢀrm.

RDS, if activated, allows you to continue listening to the same

station by automatic retuning to alternative frequencies. However, in

certain conditions, coverage of an RDS station may not be assured

throughout the entire country as radio stations do not cover 100 % of

the territory. This explains the loss of reception of the station during

a journey.

241

05 MUSIC

CD, MP3 CD, USB PLAYER, AUXILIARY

SELECTION OF SOURCE

Insert the CD in the player, insert the USB

memory stick in the USB player or connect the

USB peripheral to the USB port using a suitable

cable (not supplied).

Press the MODE button until the RADIO /

MEDIA display is obtained.

The system builds playlists (in temporary

memory), an operation which can take from

a few seconds to several minutes at the ꢀrst

connection.

Select changing source then choose the

source.

Reduce the number of non-music ꢀles and the

number of folders to reduce the waiting time.

The playlists are updated every time the ignition

is switched off or connection of a USB memory

stick. However, the system memorises these

lists and if they are not modiꢀed, the loading

time will be shorter.

Play starts automatically after a period which

depends on the capacity of the USB memory

stick.

It is also possible to change source from the

top bar.

The steering mounted SRC (source) button can be used to go to the

next media source, available if the source is active.

"CD / CD MP3"

"USB, iPod"

"Radio"

"Auxiliary"

"Bluetooth (streaming)"

242

05 MUSIC

CD, MP3 CD / USB PLAYER

INFORMATION AND ADVICE

The system supports USB mass storage or

iPod devices via the USB port (suitable cable

not supplied).

The audio equipment will only play audio ꢀles with ".wma, .aac,

.ꢁac, .ogg and .mp3" ꢀle extensions and with a bit rate of between

32 Kbps and 320 Kbps.

It also supports VBR (Variable Bit Rate) mode.

No other type of ꢀle (.mp4, .m3u...) can be played.

WMA ꢀles must be of the standard wma 9 type.

The sampling rates supported are 11, 22, 44 and 48 KHz.

Control of the peripheral device is with the

audio system controls.

Other peripherals, not recognised on

connection, must be connected to the auxiliary

socket using a Jack cable (not supplied).

In order to be read, a USB memory stick must be formatted

FAT 16 or 32.

It is advisable to restrict ꢀle names to 20 characters, without using of

special characters (e.g.: " " ? ; ù) to avoid any playing and displaying

problems.

The system does not support the operation of an Apple^®and a USB

memory stick connected at the same time.

In order to be able to play a recorded CDR or CDRW, when

recording it is preferable to select the ISO 9660 level 1, 2 or Joliet

standard.

If the disc is recorded in another format it may not be played

It is recommended that ofꢀcial Apple^®USB cables are used to

ensure correct operation.

correctly.

It is recommended that the same recording standard is always used

for an individual disc, with as low a speed as possible (4x maximum)

for optimum sound quality.

In the particular case of a multi-session CD, the Joliet standard is

recommended.

243

05 MUSIC

SELECTING A TRACK

Previous track.

List of USB or CD tracks and folders.

Up or down in the list.

/

Next track.

Previous folder.

Conꢀrm, next menu level.

Up one menu level.

Next folder.

Pause.

244

05 MUSIC

CONNECTING APPLE^®PLAYERS

AUDIO STREAMING

Connect the Apple^®player to the USB port

using a suitable cable (not supplied).

Play starts automatically.

Streaming allows audio ꢀles on your telephone to be played via the

vehicle's speakers.

Control is via the audio system.

Connect the telephone: see "Communication", "Bluetooth" section.

Choose the "Audio" or "All" proꢀle.

The classiꢀcations available are those of the portable device

connected (artists / albums / genres / playlists / audiobooks /

podcasts).

The default classiꢀcation used is by artist. To modify the

classiꢀcation used, return to the ꢀrst level of the menu then select

the desired classiꢀcation (playlists for example) and conꢀrm to go

down through the menu to the desired track.

If play does not start automatically, it may be necessary to start the

audio playback from the telephone.

Control is from the peripheral device or by using the audio system

buttons.

Copies of photos and album artwork are not compatibles with the

audio system. These appear only with a USB memory stick.

Once connected in streaming mode, the telephone is considered to

be a media source.

The version of software in the audio system may not be compatible

with the generation of your Apple^®player.

It is recommended that you activate "Repeat" on the Bluetooth

The list of devices compatible with software versions is available

peripheral.

from PEUGEOT dealers.

245

05 MUSIC

USING THE AUXILIARY INPUT (AUX)

Cable not supplied

Connect the portable device (MP3 player…) to the auxiliary JACK

socket using an audio cable.

Press the MODE button until the RADIO display

is obtained.

Select changing the source.

Select the AUXILIARY source.

First adjust the volume of your portable device (to a high level). Then

adjust the volume of your audio system.

Display and management of the controls are via the portable device.

246

05 SETTINGS

AUDIO

Press MENU to display the "MAIN MENU", then

select "Settings".

-

"Ambience" (choice of 6 musical ambiences)

"Bass"

"Treble"

"Loudness" (Activate/Deactivate)

"Distribution" ("Driver", "All passengers", "Front speakers

Select "Audio".

only")

On-board Audio: Arkamys^©Sound Staging.

With Sound Staging, the driver and passengers are immersed in an

"audio scene" recreating the natural atmosphere of an auditorium:

truly a part of the scene and its surroundings.

Select "Ambience" or "Distribution".

This new sensation is made possible by software in the audio

system which processes the digital signals from the media players

(radio, CD, MP3…) without changing the audio settings. This

processing takes account of the characteristics of the passenger

compartment to produce optimum results.

The distribution (or spatialisation using the Arkamys^©system)

of sound is an audio process that allows the audio quality to be

adapted to the number of listeners in the vehicle.

The Arkamys^©software installed in your audio system processes

the digital signal from the media players (radio, CD, MP3, ...) and

recreates a natural musical scene, with harmonious placement of

instruments and voices in the space in front of passengers, level with

the windscreen.

The audio settings (Ambience, Bass, Treble and Loudness) are

different and independent for each sound source.

The settings for distribution and balance are common to all sources.

247

COMMUNICATION

06

Press MENU.

A41

A44

A2

A42

A43

A45

A1

A3

A4

A5

A

Having made your choice,

"CALL" to start the call.

B

B31

Press

"Communications".

B1

B2

B32

B33

B34

B35

B36

B3

B4

248

Access to the "Communications" menu

"Keypad"

A4 - Enter a number using the keypad.

Press CALL to start the call.

A41 - Enter another number.

"Contacts"

A1 - List of contacts saved in the telephone.

Press twice to start the call.

A42 - "Micro OFF": cut the microphone temporarily so that the contact

does not hear your conversation with a passenger.

- "Privacy mode": transfer to your telephone for a private

conversation or to leave the vehicle without ending the call.

A43 - Choose another contact in the list.

A44 - End the call in progress.

A45 - "Switch call": change contact while retaining the current contact.

A2 - Select information on the contact or the position of the contact

on the map, using their address.

When the information is displayed, press a number to start the

call or the address to start navigation.

A3 - Display the list of contacts saved in the vehicle.

- "Conference call": accept the incoming call and communicate

with more than one person.

A5 - Press to start navigation towards the selected contact, using

their address.

"Contacts"

B3 - Manage the contact entries saved:

B31 - Use the alphabet or the arrows to ꢀnd a contact by their name.

B32 - Create a new contact.

B33 - Modify the displayed contact.

B34 - Delete the displayed contact.

"Call log"

B1 - List of outgoing, missed and incoming calls.

B2 - Details of the call selected.

Press the number to start the call.

B35 - Delete all the information for the displayed contact.

B4 - Add a new contact.

B36 - Contact folder info: entries used or available, percentage of

internal directory used and Bluetooth contacts.

249

COMMUNICATION

06

Press MENU.

C1

C2

C71

C3

C4

C5

C6

C7

C72

After making your choices,

conꢀrm to save the

modiꢀcations.

C

D1

D2

D

Press

"Communications".

D2

D3

D4

D5

D6 D7 D8

or

D3

D4

D5 D6 D7 D8 D9

During a call (shortcut menu).

250

Access to the "Communications" menu (continued)

"Search"

C4 - Start the search for another peripheral so as to connect it to the

"Bluetooth"

audio system via Bluetooth.

C1 - List of telephones already paired with the audio system.

C2 - Display a description of the telephone.

C3 - Connect/disconnect the selected telephone.

"Settings"

C7 - Your Bluetooth settings.

C71 - Import contacts from the telephone to the audio system.

C5 - Delete the selected telephone.

C6 - Import the contacts from the selected telephone to store them in

C72 - Make the audio system (telephone, ...) visible externally via

the audio system.

Bluetooth.

Setting the answering time for an incoming call.

"CALL" (shortcut menu)

D1 - List of outgoing, missed and incoming calls.

D2 - Enter an number using the keypad.

Then press "CALL" to start the call.

D3 - List of contacts saved in the telephone.

For more information, refer to the "Contacts" menu.

D4 - End the current call.

D5 - Duration, name and number of the contact for the current call.

D6 - "Switch call": change contact while retaining the current contact. "Conference call": accept the incoming call and communicate with more than one person.

D7 - "Micro OFF": cut the microphone temporarily so that the contact does not hear your conversation with a passenger.

D8 - "Privacy mode": transfer to your telephone for a private conversation or to leave the vehicle without ending the call.

D9 - Quit this shortcut menu.

251

06 BLUETOOTH

For reasons of safety and because they require prolonged attention

on the part of the driver, the operations for pairing the Bluetooth

mobile telephone to the hands-free system of the audio unit must be

carried out with the vehicle stationary.

PAIRING A BLUETOOTH TELEPHONE

FIRST CONNECTION

Activate the telephone's Bluetooth function

and ensure that it is "visible to all" (telephone

conꢀguration).

The system offers to connect the telephone:

-

or "All proꢀles" (for selection of both proꢀles).

in "Telephone (hands free)" proꢀle (telephone only),

in "Streaming Audio" proꢀle (streaming: playing music ꢀles on

the telephone),

Press MENU to display the "MAIN MENU" then

select "Communications".

Select and conꢀrm.

Select "Bluetooth".

The "Hands-free" proꢀle should be used in preference if "Streaming"

is not desired.

Select Search.

The list of peripherals detected is displayed.

The ability of the system to connect with only one proꢀle depends on

the telephone. The two proꢀles may both connect by default.

Select the name of the desired peripheral from

Visit www.peugeot.co.uk for more information (compatibility,

additional help, ...).

the list and Conꢀrm.

252

06 BLUETOOTH

The services available depend on the network, the SIM card and the compatibility of the Bluetooth telephone used. Check the telephone

manual and with your network provider for details of the services available to you.

Depending on the type of telephone, the system

Choose a code for the connection then

will ask you to accept or not the transfer of your

contacts.

"Conꢀrm".

If not, select "Update".

Enter the same code on the telephone then

accept the connection.

On return to the vehicle, the last telephone connected automatically

reconnects, within around 30 seconds after switching on the ignition

(Bluetooth activated and visible).

To modify the automatic connection mode, remove the pairing and

pair the telephone again with the desired mode.

The telephone is added to the list.

Then accept automatic connection on the telephone to allow the

telephone to reconnect automatically every time the vehicle is

started.

253

06 BLUETOOTH

RECEIVING A CALL

MANAGING PAIRED TELEPHONES

An incoming call is announced by a ring and a superimposed display

in the screen.

Press MENU to display the "MAIN MENU" then

select "Communications".

Make a short press on the steering mounted

Select "Bluetooth".

TEL button to accept an incoming call.

Select the name of the peripheral in the list.

Select:

Make a long press on the steering mounted

TEL button to reject the call.

or

Select "End call".

-

"Connect" or "Disconnect" to connect or

disconnect the Bluetooth connection with

the peripheral selected.

-

"Delete" to remove it from the list.

Select "Settings" for Bluetooth visibility,

automatic call acceptance, importing contacts.

254

06 CONTACTS

Use of the telephone is not recommended while driving. We

recommended that you park safely or make use of the steering

mounted controls.

MAKING A CALL

CALLING A NEW NUMBER

CALLING A CONTACT

Press MENU to display the "MAIN MENU" then

select "Communications".

select the telephone.

Or make a long press on the steering mounted

TEL button.

Select "Contacts".

Select "Keypad".

Select "Directory".

Select the desired contact from the list offered.

Select "CALL".

Enter the phone number using the keypad then

"Call" to start the call.

Shortcut:

Press MENU to display the "MAIN MENU" then

select the telephone.

Select the mobile or home line in the "Info"

Select or enter a number and then press "Call"

section.

to start the call.

255

06 CALL LOG

ENDING A CALL

CALLING A RECENTLY DIALLED NUMBER

Press MENU to display the "MAIN MENU" then

select "Communications".

Select the telephone in the screen.

or

Or make a long press on the steering mounted

TEL button.

or

Select "Call log".

Press the MODE button until the TELEPHONE

display is obtained.

Select the desired contact from the list offered.

It is always possible to make a call directly from the telephone; park

the vehicle ꢀrst as a safety measure.

Select "End call".

256

06 SETTINGS

RINGTONES

MANAGING CONTACTS / ENTRIES

Press MENU to display the "MAIN MENU" then

select "Settings".

Press Menu to display the "MAIN MENU" then

select "Communications.

Select "Contacts".

Select "Audio".

Select "Files".

Select "Ringtones".

Select:

You can select the ringtone used and adjust its volume.

Select "Conꢀrm".

-

"New" to add a new contact.

"Modify" to edit the selected contact.

"Delete" to delete the selected contact.

"Delete all" to delete all of the information

for the selected contact.

Select "Directory status" for the number of

entries used, available, ...

257

SETTINGS

07

Press MENU.

A11

A12

After making your choices,

conꢀrm to save the

modiꢀcations.

A

A1

A2

A3

A33

A31

A34

A32

Press

"Settings".

A4

A5

A6

A42

A41

258

Access to the "Settings" menu

"Display"

A1 - Brightness setting.

A11 - Modify the screen brightness in daylight.

A13 - Press to switch off the screen. Press the screen again (anywhere

on its surface) to switch it on again.

"System"

A2 - Select the language then conꢀrm.

"Date & Time"

A3 - Setting the date and time.

A31 - Adjust the time.

A32 - Adjust the date.

A5 - Select the data from the list then press "Delete".

A6 - Restore original settings.

A33 - Adjust the time zone.

A34 - Synchronise the time with GPS, change the time display format.

"Units"

A4 - Setting units.

A41 - Select the units used for the display of distance and fuel

consumption.

A42 - Select the units for the display of temperature.

259

SETTINGS

07

Press MENU.

B2

B4

B41

B1

B3

B

B42

B43

B44

B45

C

Press

"Settings".

C2

After making your choices,

conꢀrm to save the

modiꢀcations.

C1

C2

C3

C4

C5

260

"VEHICLE DIAGNOSTICS"

B3 - List of faults detected (depending on version) in the vehicle.

Access to the "Settings" menu (continued)

"Speed memorised"

"Vehicle settings"

B4 - Memorise speed settings for use by the cruise control or speed

B1 - Choose from the categories: "Driving assistance", "Vehicle

access", "Lighting". If no family is chosen, the complete list of

functions is displayed.

limiter.

B41 - Choose a speed to see the details. Press again to select it.

B2 - Select the function, a descriptive text and image provides details

B42 - With the speed(s) selected, press "Activate speed" to memorise

of the function. The settings of some can be adjusted.

the speeds.

Select/deselect to activate/deactivate the function.

To deactivate all speeds, press "Activate speed".

B43 - Select or deselect all speeds.

B44 - Programme the speeds with default values.

For more information on a setting, refer to the section on

the corresponding function.

B45 - Modify the speed selected.

"Audio"

"Ambience"

C2 - Distribution: set the dominant position for sound in the vehicle

C1 - Choose the audio ambience (Jazz, Classic, Pop Rock, Techno,

Vocal) or personalise the ambience with treble / bass and

activate loudness.

Move the point between the left (L) / right (R) and front (F) / rear (R).

C3 - Choose the sound level when you touch the screen with a ꢀnger

(keypad beep). Activate the sound level depending on vehicle

speed.

"Ringtones"

C5 - Choose the volume for the voice giving the names of streets.

C4 - Choose the melody and the volume for the ringtone used for an

incoming call.

261

07 SETTINGS

SYSTEM

MODIFY SYSTEM SETTINGS

Select:

Press MENU to display the "MAIN MENU" then

select "Settings".

-

"Display" to switch off the screen or adjust

the brightness.

-

"Languages" to change the language. A

black screen is displayed after conꢀrmation

for a period of about 15 seconds.

-

"Units" to change the units used

for distance, fuel consumption and

temperature.

"Date & Time" to change the time zone,

synchronisation with GPS, time and its

format and then the date.

Select "System".

Select "Other" to display the other settings.

Select "Del. data" to delete the list of recent

destinations, personal points of interest,

contacts in the list.

Choose the item then select "Del. data".

Select "Latest destinations" then press on

"Del. data" and conꢀrm with the message.

Select "Factory settings" to return to the

original settings.

262

07 SETTINGS

VEHICLE

MODIFY SETTINGS

Press MENU to display the "MAIN MENU" the

select "Settings".

Select "Vehicle".

Choose the setting from the list to see its

description and, depending on version, modify

the setting.

Then select the setting to activate it.

Select "Conꢀrm" to save the settings.

Select "Driving" and/or "Access" and/or

"Lighting" to ꢀlter the categories.

Deselect all to have the complete list.

263

FREQUENTLY ASKED QUESTIONS

The following table groups together the answers to the most frequently asked questions concerning your audio system.

QUESTION

ANSWER

SOLUTION

The route calculation is

not successful.

The guidance criteria may conꢁict with the current location (exclusion of

toll roads on a toll motorway).

Check the guidance criteria on the Navigation

Menu, "Guidance options"\ "Deꢀne calculation

criteria".

The POIs do not appear.

The POIs have not been selected.

The POIs have not been downloaded.

The audible warning is not active.

Select the POIs in the list of POIs.

Download the POIs from the website:

"http://peugeot.navigation.com".

The speed camera

audible warning does not

work.

Activate audible warnings in the Guidance options

menu, "Navigation - guidance", "Set parameters

for risk areas".

The system does not

The guidance criteria do not take account of TMC messages.

Select the "Trafꢀc info" function in the list of

guidance criteria.

suggest a detour around

an incident on the route.

I receive a speed camera Other than guidance, the system announces all speed cameras

alert for a speed camera

which is not on my route. for speed cameras located on nearby or parallel roads.

Zoom in on the map to view the exact position of

positioned in a cone located in front of the vehicle. It may provide an alert the speed camera. Select "On the route" to no

longer receive alerts other than guidance or to

reduce the time for the announcement.

264

FREQUENTLY ASKED QUESTIONS

QUESTION

ANSWER

SOLUTION

Certain trafꢀc jams

On starting, it is several minutes before the system begins to receive the

trafꢀc information.

Wait until the trafꢀc information is being received

correctly (display of the trafꢀc information icons on

the map).

along the route are not

indicated in real time.

The ꢀlters are too restrictive.

Modify the "Geographic ꢀlter" settings.

In certain countries, only major routes (motorways...) are listed for the

trafꢀc information.

This phenomenon is normal. The system is

dependent on the trafꢀc information available.

The altitude is not

displayed.

On starting, the initialisation of the GPS may take up to 3 minutes to

receive more than 4 satellites correctly.

Wait until the system has started up completely.

Check that there is a GPS coverage of at least

4 satellites (long press on the SETUP button, then

select "GPS coverage").

Depending on the geographical environment (tunnel...) or the weather,

the conditions of reception of the GPS signal may vary.

This phenomenon is normal. The system

is dependent on the GPS signal reception

conditions.

I cannot connect my

Bluetooth telephone.

The telephone's Bluetooth function may be switched off or the telephone

may not be visible.

-

Check that your telephone's Bluetooth

function is switched on.

Check in the telephone settings that it is

"visible to all".

The Bluetooth telephone is not compatible with the system.

The volume depends both on the system and on the telephone.

A list of compatible Bluetooth mobile telephones is

available from the dealer network.

The volume of the

telephone connected

in Bluetooth mode is

inaudible.

Increase the volume of the audio system, to

maximum if required, and increase the volume of

the telephone if necessary.

The ambient noise level has an inꢁuence on the quality of telephone

communication.

Reduce the ambient noise level (close the windows,

reduce the booster fan speed, slow down, ...).

265

FREQUENTLY ASKED QUESTIONS

QUESTION

ANSWER

SOLUTION

Some contacts are

duplicated in the list.

The options for synchronizing contacts are synchronizing the contacts

on the SIM card, the contacts on the telephone, or both. When both

synchronizations are selected, some contacts may be duplicated.

Select "Display SIM card contacts" or "Display

telephone contacts".

Contacts are not shown

in alphabetical order.

Some telephones offer display options. Depending on the settings

chosen, contacts can be transferred in a speciꢀc order.

Modify the display setting in the telephone

directory.

The system does not

The Bluetooth mode does not permit sending SMS text messages to the

receive SMS text messages. system.

The CD is ejected

The CD is inserted upside down, is unplayable, does not contain any

-

Check that the CD is inserted in the player the

right way up.

automatically or is not

played by the player.

audio data or contains an audio format which the player cannot play.

Check the condition of the CD: the CD cannot

be played if it is too damaged.

Le CD has been recorded in a format that is not compatible with the player.

Check the content in the case of a recorded

CD: consult the advice in the "Audio" section.

The CD is protected by an anti-pirating protection system which is not

recognised by the audio system.

The audio system's CD player does not play

DVDs.

Some recorded CDs will not be played by

the audio system because they are not of the

correct quality.

There is a long waiting

When a new medium is inserted, the system reads a certain amount of

This phenomenon is normal.

period following the insertion data (directory, title, artist, etc.). This may take from a few seconds to a

of a CD or connection of a

USB memory stick.

few minutes.

The CD player sound is

poor.

The CD used is scratched or of poor quality.

Insert good quality CDs and store them in suitable

conditions.

The audio equipment settings (bass, treble, ambiences) are unsuitable.

Set the treble or bass level to 0, without selecting

an ambience.

266

FREQUENTLY ASKED QUESTIONS

QUESTION

ANSWER

SOLUTION

Some characters in the

media information are not

displayed correctly while

playing.

The audio system does not display some types of characters.

Use standard characters to name tracks and

folders.

Playing of streaming ꢀles The peripheral device connected does not support automatic play.

does not start.

Start the playback from the device.

The names of tracks and The Bluetooth proꢀle does not allow the transfer of this information.

the track length are not

displayed on the screen

when streaming audio.

The quality of reception

of the radio station

The vehicle is too far from the transmitter used by the station listened

to or there is no transmitter in the geographical area through which the

vehicle is travelling.

Activate the "RDS" function by means of the

short-cut menu to enable the system to check

whether there is a more powerful transmitter in the

geographical area.

listened to gradually

deteriorates or the stored

stations do not function

(no sound, 87.5 Mhz is

displayed...).

The environment (hills, buildings, tunnels, basement car parks...) block

reception, including in RDS mode.

This phenomenon is normal and does not indicate

a fault with the audio system.

The aerial is absent or has been damaged (for example when going

through a car wash or into an underground car park).

Have the aerial checked by a PEUGEOT dealer.

I cannot ꢀnd some radio

stations in the list of

stations received.

The station is not received or its name has changed in the list.

Some radio stations send other information in place of their name (the

title of the song for example).

The system interprets this information as the name of the station.

The name of the radio

station changes.

267

FREQUENTLY ASKED QUESTIONS

QUESTION

ANSWER

SOLUTION

In changing the setting

of treble and bass the

equalizer setting is

deselected.

The selection of an equalizer setting imposes the balance settings.

Modifying one without the other is not possible.

Modify the balance or equalizer settings to obtain

the desired musical ambience.

In changing the equalizer

setting, treble and bass

return to zero.

When changing the

balance settings, the

distribution setting is

deselected.

The selection of a distribution setting imposes the balance settings.

Modifying one without the other is not possible.

Modify the balance or distribution settings to

obtain the desired musical ambience.

When changing an

distribution setting,

the balance setting is

deselected.

There is a difference in

sound quality between

the different audio

For optimum sound quality, the audio settings for Volume, Bass, Treble,

Equalizer and Loudness can be adapted to the different sound sources,

which may result in audible differences when changing source (radio,

CD...).

Check that the audio settings for (Volume, Bass,

Treble, Equalizer, Loudness) are adapted to

the sources listened to. It is advisable to set the

AUDIO functions (Bass, Treble, Fr-Re balance,

Le-Ri balance) to the middle position, select the

"None", musical ambience and set the loudness

correction to the "Active" position in CD mode or

to the "Inactive" position in radio mode.

sources (radio, CD...).

268

FREQUENTLY ASKED QUESTIONS

QUESTION

ANSWER

SOLUTION

With the engine off, the

When the engine is switched off, the system's operating time depends on Start the vehicle's engine to increase the battery

system switches off after the battery charge.

charge.

a few minutes of use.

The switch-off is normal: the system switches to economy mode and

switches off to prevent discharging of the vehicle's battery.

Playback of my USB

memory stick starts only

after a very long wait

(around 2 to 3 minutes).

Some ꢀles supplied with the memory stick may greatly slow down access Delete the ꢀles supplied with the memory stick

to reading the memory stick (multiplication by 10 of the catalogue time).

and limit the number of sub-folders in the ꢀle

structure on the memory stick.

When I connect my

When the iPhone connects automatically as a telephone, it forces the

Disconnect and reconnect to the USB port (the

USB function takes priority over streaming).

iPhone as telephone and streaming function. The streaming function takes the place of the USB

to the USB port at the

same time, I am unable

to play the music ꢀles.

function which is then not useable, there is a period without sound of the

track being played with Apple^®players.

269

GPS Manual for 208 for Your Peugeot Expert Van Second Generation (2007-2015)

Popular Owner Manuals

Latest Owner Manuals