2007-2015 Peugeot Expert Van GPS Manual for 4008 User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

GPS Manual for 4008 for Your Peugeot Expert Van Second Generation (2007-2015)

04. for 4008  
AUDIO-TELEMATIC System  
CONTENTS  
01 First steps - Control panel  
02 General operation  
03 Navigation - Guidance  
04 Audio / Video  
05 Settings  
06 Information  
07 Peugeot Connect USB  
08 BLUETOOTH® streaming  
09 BLUETOOTH® telephone  
P.  
P.  
P.  
P.  
P.  
P.  
P.  
P.  
P.  
224  
225  
226  
236  
258  
261  
264  
269  
271  
The system is protected in such a way that it will only  
operate in your vehicle.  
For safety reasons, the driver must carry out operations  
which require prolonged attention while the vehicle is  
stationary.  
When the engine is switched off and to prevent  
discharging of the battery, the system switches off  
following the activation of the energy economy mode.  
223  
01 FIRST STEPS  
SCALE: change the scale of the map.  
AUDIO: select Audio-video (FM, CD, music  
server, ...) or Navigation (map) display.  
ENT: conꢀrms the choice of the item  
selected in the screen.  
VOL: adjust audio-video volume.  
For certain operations, conꢀrmation is  
given by pressing the touch screen.  
POWER: audio system on/off (only).  
Scroll the map displayed or selection of an  
item.  
OPEN: opens the screen and  
gives access to CD/DVD.  
A second press closes the  
screen.  
Mute on/off.  
Next or previous selection for:  
-
-
-
a radio station,  
an audio track (CD),  
a chapter (DVD).  
Move a ꢀnger over the screen to operate  
the system.  
Use the buttons offered on the screen.  
For safety reasons, the driver  
must only carry out operations  
which require prolonged  
attention with the vehicle  
stationary.  
Set the audio volume.  
Change the audio-video source (FM, CD,  
music server, ...).  
224  
02 GENERAL OPERATION  
DESCRIPTION OF THE CONTROLS - MENUS  
INFO: Information menu for the  
consultation or adjustment of certain  
settings for your vehicle.  
MODE: Audio-video menu for:  
-
-
-
-
radio,  
audio, MP3 or WMA CD,  
music server,  
DVD.  
SET: Settings menu for:  
MENU: Navigation-guidance menu for  
NAVI: display of the current location on  
selecting:  
the map.  
-
-
-
-
switching off the screen,  
selecting the sound setting,  
selecting the picture quality,  
-
-
-
-
-
a destination,  
a point of interest (POI),  
an advanced search by POI,  
one of the 20 previous destinations,  
selecting the language, the time zone  
or the units,  
-
-
selecting the size of the DVD picture,  
an address stored in the address  
book,  
selecting the guidance voice, the  
screen colour schemes or display of  
the audio-video icon,  
-
-
-
the return home,  
certain navigation settings,  
a route demonstration.  
-
setting certain equipment available in  
your vehicle.  
225  
03 NAVIGATION - GUIDANCE  
GPS SYSTEM  
WHAT IS THE NAVIGATION SYSTEM AND GPS?  
The system's measurements may be inaccurate if the vehicle is:  
-
in a tunnel or underground car park,  
underneath a two-level motorway,  
in an area with several very high buildings,  
surrounded by closely planted trees.  
The satellite navigation system guides the driver to the destination  
that he has set in accordance with a chosen route.  
Initially, it searches for the destination required by the user, then  
it calculates the route and ꢀnally it provides the visual and vocal  
guidance instructions.  
-
-
-
Depending on the vehicle's situation and the reception of the GPS  
information, the displayed information may disappear from the  
screen temporarily.  
GPS (Global Positioning System) consists of several  
satellites arranged around the earth. They continuously  
transmit digital signals which travel at the speed of  
light, on 2 different frequencies.  
At any given time, the system receives its position  
in relation to the satellites detected and the time of  
transmission of the signal.  
WHAT IS A POINT OF INTEREST (POI)?  
This enables the telematic unit to calculate its position  
A point of interest (POI) is represented by an icon on  
the map, it represents an airport, a station, a town  
hall, ...  
and therefore that of the vehicle.  
A repositioning process using the map database stored  
on the hard disk allows the vehicle to be positioned  
on the road network, so improving the accuracy of the  
vehicle location function.  
Up to 40 different icons may be displayed (refer to the  
section "Points of interest icon").  
WHAT PRECAUTIONS SHOULD BE OBSERVED IN  
ORDER TO MAKE BEST USE OF THE SYSTEM?  
They are classiꢀed in 5 groups and identiꢀed by one  
colour for each group:  
-
-
-
-
-
Shops, ꢀnance and businesses (Green),  
Vehicles and travel (Dark blue),  
Restaurants (Orange),  
Public places and emergency services (Brown),  
Entertainment and attractions (Blue).  
Do not place anything on or near the GPS aerial.  
Do not use any digital communication equipment (personal  
computers, etc.) near the GPS aerial.  
Do not afꢀx any reꢁective ꢀlms or ꢀlms containing carbon to the  
windows.  
226  
03 NAVIGATION - GUIDANCE  
INFORMATION DISPLAYED ON THE MAP  
J. Destination/intermediate destination  
information: indicates the distance and  
the time remaining until the destination or  
intermediate destination is reached.  
A. Manoeuvre icon: indicates whether the  
DURING NAVIGATION  
driver should turn left or right at the next  
junction indicated by the guidance and the  
distance to this junction.  
B. Guidance route: indicates the route to the  
destination.  
C. Vehicle marker: indicates the position of  
the vehicle while driving.  
D. TMC icon: displays trafꢀc information  
such as trafꢀc jams, road works, etc.  
When the icon is touched, detailed TMC  
information can be viewed.  
A
B
C
E. Orientation mark: indicates the orientation  
D
of the map displayed.  
F. Map scale: indicates the scale of the map  
displayed.  
G. Name of the street: indicates the name of  
E
F
the current street.  
K. Press for access to the Route Menu in  
H. Direction frame: displays the number of  
the next road or the name of the next  
street which the driver should turn into.  
order to:  
G
K1 - change the route in favour of another  
making a detour through a speciꢀed  
region,  
I. Destination/intermediate destination icon:  
indicates the direction of the destination  
or intermediate destination.  
Single map display.  
H
K2 - change the position of the destination,  
add an intermediate destination and  
change the route calculation conditions,  
K3 - display a route by various methods,  
K4 - delete a route created,  
K5 - search for points of interest (POI)  
around the current location.  
I
K
J
Two-map display.  
227  
03 NAVIGATION - GUIDANCE  
A
- Select a location using the address or street name  
of the destination. Select:  
SEARCHING FOR A DESTINATION USING  
AN ADDRESS OR POINTS OF INTEREST  
A1  
(POI)  
A1 - the country,  
A2  
A2 - the city,  
A3  
A4  
A5  
A3 - the street,  
A4 - the house number,  
A5 - the name of a junction,  
A6 - to select the search using either a number or a  
A6  
junction.  
B
- Select a location using the name of a point of  
interest (POI).  
Select:  
B1 - the country,  
B2 - the city,  
B3 - the name of a stored POI,  
B4 - a POI category (airport, bowling alley, bus station,  
B1  
A
B
C
B2  
B3  
B4  
car park, service station, hotel, cinema, ...),  
B5 - a detailed POI list.  
B5  
C
- Select a location using an advanced search based  
on a POI:  
C1 - around the current location,  
C2 - on the current route,  
C1  
C4  
C7  
C2  
C5  
C8  
C3  
C6  
C3 - in the vicinity of the destination,  
C4 - on a chosen street,  
C5 - along a motorway or in the vicinity of the exit,  
C6 - by scrolling the map,  
C7 - taking the point of departure of the current route,  
C8 - specifying the latitude/longitude coordinates.  
You have a maximum of 100 points of interest (POI) within a radius of  
approximately 60 miles (100 km).  
228  
03 NAVIGATION - GUIDANCE  
SEARCHING USING PREVIOUS  
DESTINATIONS, A STORED ADDRESS OR  
A RETURN HOME  
D
- Select a location using one of the 20 previous  
destinations.  
E
- Select a location using an address stored in the  
address book. Sort by:  
E1  
E2  
E3  
E1 - Icon,  
E2 - Name,  
E3 - Date.  
D
E
F
F
- Select a return home directly.  
Press YES to store your home address (the ꢀrst  
time).  
229  
03 NAVIGATION - GUIDANCE  
NAVIGATION SETTINGS AND  
INFORMATION (1/2)  
G
- Select the settings of functions linked with the  
navigation to:  
G1 - set the screen display parameters such as:  
- display 1 or 2 maps,  
G1  
G4  
G2  
G5  
G3  
- display or do not display the POIs on the map,  
display selected icons,  
- change the colours of the map,  
- display or do not display the name of the  
current street.  
- display or do not display the address of the  
current street.  
G2 - set route conditions, such as,  
- avoiding trafꢀc problems,  
- avoiding selected areas,  
- avoiding roads at a certain time.  
G3 - set the route guidance mode and the displaying  
of the results of the route search.  
G4 - save, change or delete a location in the address  
book,  
G
G5 - display and select the trafꢀc information such  
as trafꢀc jams or road works by selecting  
dynamic guidance.  
230  
03 NAVIGATION - GUIDANCE  
NAVIGATION SETTINGS AND  
H
- Select basic information relating to the  
navigation as well as a pre-set route  
demonstration to:  
INFORMATION (2/2)  
H1 - choose to divert your route to avoid certain  
areas,  
H2 - select a location using an advanced search  
based on a POI along a motorway or in the  
vicinity of the motorway exit,  
H3 - start/stop the demonstration,  
H4 - recall a stored map screen.  
H1  
H3  
H2  
H4  
H
231  
03 NAVIGATION - GUIDANCE  
SELECTING POINTS OF INTEREST (POI)  
General  
ICONS DISPLAYED ON THE MAP  
Public places and emergency services (Brown)  
Town centre  
Locality  
Town Hall  
Shops, ꢀnance and businesses (Green)  
Community centre  
Convention / exhibition centre  
Hospital  
Major companies  
Shopping centre  
University / college  
You can select up to 40 types of point of  
interest icon which are displayed on your map  
screen.  
Vehicles and travel (Dark blue)  
Entertainment and attractions (Blue)  
PEUGEOT  
Press the MENU button then [Navigation  
Airport  
Settings].  
Theme park  
Bowling alley  
Casino  
Bus stop  
Vehicle hire  
Suburban / main line station  
Ferry terminal  
Hotel  
Cinema  
Golf course  
Historical monument  
Skating rink  
Park and ride  
Car park (press +)  
Service station  
Rest area  
Press [Screen] then [Select] on the POI line.  
Press [4] which is displayed.  
Marina  
Museum  
Flying club  
Toll booth  
Leisure area  
Ski station  
Tourist information  
Railway station  
Sports centre  
Theatre / opera  
Tourist attraction  
Vineyard / wine and spirit store  
Restaurant (Orange)  
Press each POI required.  
Night life / night club  
Restaurant  
At each contact with a POI, the display of [Į] changes  
(Į = the POI will be displayed on the screen).  
232  
03 NAVIGATION - GUIDANCE  
ENTERING AN ADDRESS AND STARTING GUIDANCE (1/2)  
Press  
Explanation  
Result  
Press the MENU button.  
Press [Address/Junction].  
Press [Country] and enter the name of the country using the touch keypad.  
When a character of the name of the country is entered, if 5 countries or fewer are  
recognised, you can select a country from a list which is displayed or press [List].  
You can select one of the 5 most recently selected countries by pressing  
[Last 5] on the "Country" line.  
Press [City] then [Keyword] and enter the name of the city using the touch keypad.  
When a character of the name of the city is entered, if 5 cities or fewer are recognised,  
you can select a city from a list which is displayed or press [List].  
You can select a city using the post code.  
Press [Post Code] and enter the number.  
You can select one of the 5 most recently selected cities by pressing [Last 5]  
on the "City" line.  
233  
03 NAVIGATION - GUIDANCE  
ENTERING AN ADDRESS AND STARTING GUIDANCE (2/2)  
Press  
Explanation  
Result  
Press [Street] and enter the name of a street using the touch keypad.  
When a character of the name of the street is entered, if 5 streets or fewer are  
recognised, you can select a street from a list which is displayed or press [List].  
Press [House #] and enter the number of the house using the touch keypad.  
You can enter the name of a junction instead of the number of the  
street. Press [Junction] and select the name from a list which is  
displayed.  
This is the result once all of the information has been entered:  
/
If you agree with the information press [Set], otherwise press one of the buttons to  
correct.  
Press [Start] to start the navigation.  
234  
03 NAVIGATION - GUIDANCE  
TRAFFIC INFORMATION  
During navigation, the system gives you trafꢀc  
information received in real time.  
The system can then suggest a detour route,  
if dynamic guidance has been activated by  
pressing MENU, [Navigation settings] then  
[TMC].  
Press  
Explanation  
Result  
Press [Route].  
Press [Display new route].  
The system offers a detour route (dynamic guidance).  
Press [Back] and enter to return to the previous screen.  
The system asks you to conꢀrm or not the new route.  
Press [Yes] to conꢀrm your choice. The system displays the name of the new route.  
Press [No] to not register the route.  
235  
04 AUDIO / VIDEO  
RADIO, RDS, AF, REG, TP, PTY  
WHAT IS RDS?  
REGIONAL MODE  
Some stations are organised in a network.  
The Radio Data System (RDS) function on the FM waveband permits:  
In different regions, they broadcast different or shared programmes  
-
automatic retuning to alternative frequencies carrying the  
same station while travelling through different regions (if the  
transmitters of this station cover the area through which you are  
travelling),  
depending on the time of day.  
You can follow:  
-
-
a regional station only,  
-
-
temporary tuning to trafꢀc information announcements,  
display of the name of the station, etc ...  
the entire network, with the possibility that you will be listening  
to a different programme.  
Most FM stations use RDS.  
These stations transmit non-audible data in addition to their programmes.  
TRAFFIC INFORMATION FUNCTION  
The data transmitted in this way allows you access to various  
functions, mainly displaying of the name of the station, temporary  
tuning to trafꢀc information announcements or automatic retuning to  
alternative frequencies.  
RDS allows you to continue listening to the same station  
automatically by means of alternative frequencies. However,  
alternative frequencies may not be provided throughout the country.  
Radio stations do not cover the whole country, which explains the  
loss of reception of the station during a journey.  
The Trafꢀc Programme (TP) function permits automatic and  
temporary switching to an FM station broadcasting trafꢀc  
information.  
The radio station or the source that you are listening to at this point  
is paused.  
Once the trafꢀc information has ended, the system switches back to  
the radio station or the source that you were listening to initially.  
RDS ALTERNATIVE FREQUENCIES  
PROGRAMME TYPES  
Your radio automatically checks and selects the best frequency for  
the radio station to which it is tuned (if the station broadcasts on  
several transmitters or frequencies).  
Some stations offer the option of listening to a themed type of  
programme as a priority, selected from the list available below:  
NEWS, AFFAIRS, INFOS, SPORT, EDUCATE, DRAMA, CULTURE,  
SCIENCE, VARIED, POP M, ROCK M, EASY M, LIGHT M,  
CLASSICS, OTHER M, WEATHER, FINANCE, CHILDREN,  
SOCIAL, RELIGION, PHONE IN, TRAVEL, LEISURE, JAZZ,  
COUNTRY, NATION M, OLDIES, FOLK M, DOCUMENT.  
The frequency of a radio station covers approximately 30 miles  
(50 km). The change from one frequency to another explains the  
loss of reception during a journey.  
If the station to which you are listening does not have several  
frequencies in the region in which you are currently located, you can  
deactivate automatic alternative frequencies.  
236  
04 AUDIO / VIDEO  
INFORMATION DISPLAYED IN RADIO MODE  
A
B
C
D
E
F
F. Display of 6 preset stations.  
G. To receive the preset station.  
Press and hold to store a station.  
H. To change the frequency step by step.  
N
M
L
Press and hold for continuous frequency  
G
changing.  
I. To search for currently broadcasting  
stations which can be received in the  
current location, until a station is found.  
J. To display the programme type setting  
screen, e.g.: sport, rock, classical, news, ...  
Press PTY again to exit.  
K
J
I
H
A. A preset number is displayed when a  
preset station has been selected.  
K. Press this button to display the secondary  
menu.  
B. The name of the station is displayed  
L. REG is displayed during the reception of  
regional frequencies information.  
during the reception of RDS information. If  
the station name has not been transmitted,  
the frequency is displayed.  
M. RDS is displayed during the reception of  
RDS information.  
C. Stereo is displayed when a stereo  
N. TP is displayed when the trafꢀc  
information is in standby mode.  
transmission is received.  
D. AF is displayed when the AF function is  
on.  
E. PTY (programme type) is displayed if the  
RDS information received is displayed.  
TRAFINF is displayed, during an  
interruption, for trafꢀc information.  
ALARM is displayed, during an  
interruption, for urgent information.  
237  
04 AUDIO / VIDEO  
RADIO, SELECTING AN FM STATION AND PRESETTING  
Press  
Explanation  
Result  
Press the MODE button.  
Press FM. By default the screen shows the FM1 stations.  
Press [ꢂ Tune] to decrease the frequency or [Tune ꢃ] to increase the frequency. The  
frequency is changed in steps of 0.1 MHz.  
Continue to press to tune to a station automatically.  
You can select [ꢀSeek] or [Seek ꢁ] to start a continuous search until the  
stations which can be received in the current location are detected.  
You can also start a search by type of programme by pressing [PTY].  
Once the frequency has been selected, a long press on the station (e.g. 3) will preset it.  
The name of the station is displayed if it is available.  
You can start automatic presetting on FM3 for 6 stations, which can be  
received in the current location, by pressing [^] then [Auto-Store].  
238  
04 AUDIO / VIDEO  
RADIO, RDS SETTINGS  
Press  
Explanation  
Result  
Press the MODE button.  
Press FM. By default the screen shows the stations on FM1.  
Press [^].  
Press [RDS Settings].  
Press [On] or [Off] to activate or deactivate the functions:  
-
-
-
AF: automatic search for the best frequency,  
REG: switch to the regional frequencies,  
TP: automatic selection of stations broadcasting trafꢀc information.  
239  
04 AUDIO / VIDEO  
CD PLAYER  
The recording speed may be slower than 4x due to the processing  
load on the equipment or the condition of the audio CD.  
If jumps or other errors occur, return to the beginning of the track  
and start the recording again.  
Your Audio-Telematic system allows you to listen to audio CDs  
(CDDA, CD-Text, CD-R/RW) or MP3 and WMA CDs.  
Even if there is no gap between the tracks on the CD, a brief silence  
between tracks is stored on the hard disk.  
PLAYING AN AUDIO CD  
When the audio CD is inserted in the player,  
playing of the tracks is automatic and they can be  
recorded onto the hard disk.  
WHAT IS THE GRACENOTE CDDB?  
The title information for the track currently being played  
can be obtained from the "Gracenote CDDB" database  
stored on the hard disk.  
Simultaneous access to the music recognition  
service "Gracenote CDDB" on the hard disk permits display of the  
title information.  
The Gracenote company uses this standard to identify  
the music and the associated information such as:  
RECORDING ONTO THE MUSIC SERVER  
-
-
-
-
the title of the album,  
the name of the artist,  
the title of the tracks,  
the genre, ...  
The tracks of audio CDs (not MP3/WMA) can be recorded  
onto the hard disk at approximately 4x speed  
(e.g.: 60 minutes converted to 15 minutes) and stored on  
the music server.  
For further details, consult the site: www.gracenote.com.  
The Gracenote CDDB database incorporated in this equipment  
cannot guarantee the content of the data 100%. You can update this  
database using a DVD sold separately.  
The sounds recorded may be altered by the noise present and the  
quality of the sound may differ from the original.  
The tracks recorded on the music server cannot be reproduced on  
another medium (CD-R/RW, HDD, etc...).  
Previously recorded tracks cannot be recorded again from the same  
COPYRIGHT  
CD.  
Switching off the engine or removing the CD during recording will  
result in the tracks being faulty.  
Your Audio equipment may allow you to listen to music which is  
usually protected by copyright in accordance with current national  
and international standards. Please consult these standards and  
comply with them.  
The operation of the navigation system may slow down during  
recording.  
240  
04 AUDIO / VIDEO  
INFORMATION DISPLAYED IN CD MODE AND COPYING A CD  
A
B
C
H. Displays the number and the name of the  
track. While driving, they are not available  
and cannot be selected.  
D
E
K
J
I. To display the secondary menu.  
J. Move the cursor onto the track currently  
being played.  
F
K. The number and the name of the track  
currently being played are displayed.  
I
H
G
L
A. The name of the album is displayed for the  
track currently being played.  
M
B. The name of the artist is displayed for the  
album currently being played.  
C. The playing time of the track currently  
being played is displayed.  
The CD button is only active if the player  
contains a CD.  
D. The playing mode currently selected is  
displayed.  
L. During copying, this symbol is displayed  
in red and it goes off when all copying  
operations are complete. The number  
indicates the percentage of the total  
number of tracks on the CD already  
copied onto the hard disk. 00% when only  
one track has been copied.  
E. Position of the cursor and total number of  
tracks on the album.  
F. Displays the item currently selected.  
G. To scroll up or down through the tracks.  
Press and hold for fast backwards or  
forwards playing of a track.  
M. The tracks which have not been copied  
are displayed in blue.  
No symbol is displayed for tracks for  
which copying has ꢀnished.  
Press Open to return the screen to the vertical  
position.  
241  
04 AUDIO / VIDEO  
PLAYING A CD  
Press  
Explanation  
Result  
Press the MODE button then CD, if the player already contains a CD.  
Otherwise, insert a CD in the player, play begins automatically.  
Selecting a track  
Press [ꢂ Track] to select the previous track or return to the beginning of the track  
currently being played.  
Press and hold for fast backwards play.  
Press [Track ꢃ] to select the next track.  
Press and hold for fast forwards play.  
Changing the play mode  
Press [^] to access the secondary menu.  
Press [Repeat] to play the track in a loop (repetition).  
Press [^] then [Repeat] to stop.  
Press [Scan] to play the beginning of each track for approximately 9 seconds (scan).  
Press [^] then [Scan] to stop or press the current track (during the 9 seconds) and play  
begins.  
Press [Random] to play the tracks in random order. Press [^] then [Random] to stop.  
242  
04 AUDIO / VIDEO  
COPYING A CD ONTO THE MUSIC SERVER (1/3)  
Press  
Explanation  
Automatic copying of all of the tracks  
Result  
All of the tracks are copied automatically when a CD is inserted.  
This automatic copy is programmed by default on leaving the factory.  
If you have changed the copy mode (manual or ꢀrst track), while a CD is being played  
press [^] for access to the secondary menu.  
Press [REC. Setting].  
Press [Auto REC.] and conꢀrm by pressing [Back].  
Next, eject the CD currently being played then insert a CD and copying of all of the  
tracks begins.  
If you wish to copy the CD which is currently being played, press [^] for access to the  
secondary menu and press [REC. Start].  
If another track (already copied) is selected during copying, the copying continues and  
the new track selected is played.  
If another track (not copied) is selected, the copying which is in progress stops and the  
copying of the new track selected begins. This track is played during copying.  
243  
04 AUDIO / VIDEO  
COPYING A CD ONTO THE MUSIC SERVER (2/3)  
Press  
Explanation  
Manual copying of individual tracks  
Result  
You can copy the tracks manually, one by one.  
After inserting a CD and while it is being played, press [^] for access to the secondary  
menu.  
Press [REC. Setting].  
Press [Manual REC.] and conꢀrm by pressing [Back].  
Once the manual programming has been carried out, select the track to be copied then  
press [^].  
Press [REC. Start], the copying of the track selected begins.  
If another track is selected during copying, the copying stops and the new track selected is  
played.  
244  
04 AUDIO / VIDEO  
COPYING A CD ONTO THE MUSIC SERVER (3/3)  
Press  
Explanation  
Automatic copying of the ꢀrst track  
Result  
You can programme the automatic copying of the ꢀrst track when a CD is inserted.  
After inserting a CD and while it is being played, press [^] for access to the secondary  
menu.  
Press [REC. Setting] then [Single REC.] and conꢀrm by pressing [Back].  
Next, eject the CD which is currently being played then insert a CD and the copying of  
the ꢀrst track begins.  
If you wish to copy the ꢀrst track of the CD which is currently being played, press [^] for  
access to the secondary menu and press [REC. Start].  
If another track is selected during copying, the copying stops and the track selected is  
played.  
Stopping automatic or manual copying  
During the copying of a CD or of a track on a CD, press [^] for access to the secondary  
menu.  
Press [REC. Stop], the copying stops.  
245  
04 AUDIO / VIDEO  
GENERAL NOTES ON THE MUSIC SERVER  
WHAT IS THE MUSIC SERVER?  
Your Audio-Telematic system allows you to copy audio CDs onto a  
music server, up to 2,500 songs on a 10 Gb hard disk.  
The tracks on audio CDs (not MP3 or WMA) can be recorded onto  
the hard disk at approximately 4x speed and stored in the music  
server.  
Refer to the "Recording a CD" section.  
The music server then allows you to manage groups and lists of  
tracks.  
246  
04 AUDIO / VIDEO  
"NEW GROUP" GROUP FOR THE USER, NUMBERS 03  
TO 99:  
"ORIGINAL" GROUP, NUMBER 01:  
This is the location of the original playlist created  
This is the location of the user's playlists.  
You can record up to 9999 playlists in this group.  
The group can be created, renamed or deleted.  
automatically (not manual) when a track of an  
audio CD is recorded.  
It is not possible to change its name or delete it.  
You can record up to 9999 playlists in this group.  
"MY BEST" GROUP, NUMBER 02:  
"ORIGINAL PLAYLIST" LISTS:  
These are original playlists created automatically  
(not manual) when an audio CD is copied.  
This is the location of the playlists, etc ... created  
automatically from the information read in the  
music server.  
The lists and the artists can be renamed or  
deleted. The genres can also be set.  
It is not possible to change its name or delete it.  
The groups "My Favorites" and "My Frequency" are stored here.  
247  
04 AUDIO / VIDEO  
"MY FAVORITES" LIST:  
"USER PLAYLIST" LIST:  
This is the location for storing your favourite  
This is the location of a playlist of tracks selected  
tracks.  
by the user from the original list.  
They can be deleted from the list and the order in which they are  
If you delete a track from the original list, it will be  
played can be changed.  
deleted from the user list.  
The list and the artist can be renamed or deleted.  
It is possible to add tracks or change their order.  
"MY MOST PLAYED" LIST:  
This is the location of the playlists used most  
frequently from the original list.  
It is not possible to add tracks or change their order.  
248  
04 AUDIO / VIDEO  
INFORMATION DISPLAYED IN MUSIC SERVER MODE  
A
B
C
D
G. To display the list of groups, the playlist  
and the list of tracks.  
H. To scroll up or down through the tracks.  
E
F
Press and hold for fast backwards or  
G
M
L
forwards playing of a track.  
I. To scroll up or down through the playlists.  
J. Group lists: number and name of the  
group.  
Playlists: number and name of the playlist.  
Track lists: number and name of the track.  
K. To display the secondary menu.  
K
J
I
H
L. Displays the item currently selected.  
A. The number and the name of the track  
currently being played are displayed.  
M. Move the cursor onto the track currently  
being played.  
B. The number and the name of the playlist  
currently being played are displayed.  
C. The name of the artist is displayed for the  
playlist currently being played.  
D. The playing time of the track currently  
being played is displayed.  
E. The playing mode currently selected is  
displayed.  
F. Group lists: position of the cursor and total  
number of groups.  
Playlists: position of the cursor and total  
number of playlists.  
Track lists: position of the cursor and total  
number of tracks.  
249  
04 AUDIO / VIDEO  
PLAYING A TRACK OR A PLAYLIST IN THE MUSIC SERVER  
Press  
Explanation  
Result  
Press the MODE button then Music Server.  
The playlists are played in a loop.  
The server can play a track while recording another track from a CD. You must wait  
until recording is complete before playing the recorded track.  
Selecting a track  
Press [ꢂ Track] to select the previous track or return to the beginning of the track  
currently being played.  
Press and hold for fast backwards.  
Press [Track ꢃ ] to select the next track.  
Press and hold for fast forwards.  
Selecting a playlist  
Press [ꢀ Playlist] to select the previous playlist.  
Press [Playlist ꢄꢁ] to select the next playlist.  
Press these buttons to switch between groups, playlists and tracks.  
You cannot switch directly from groups to tracks.  
250  
04 AUDIO / VIDEO  
CREATING A GROUP AND A PLAYLIST IN THE MUSIC SERVER  
Press  
Explanation  
Result  
Creating a group  
Press [^] to access the secondary menu.  
Press [New Group], enter the name of the group and press [SET].  
The group is stored on the server.  
Creating a playlist  
Press [^] to access the secondary menu then press [Function Settings].  
Press [New Playlist].  
Select the group to which the playlist is to be attached. The group must be created ꢀrst.  
Enter the name of the playlist and conꢀrm by pressing [SET].  
Then select the search method attached to this new list (either from the list or by  
conditions).  
The list is stored on the server.  
251  
04 AUDIO / VIDEO  
GENERAL NOTES ON MP3/WMA CDS  
Windows Media and Microsoft Corporation are trademarks  
registered in the United States and/or other countries.  
PLAYING AN MP3/WMA CD  
When the MP3/WMA CD is inserted in the player,  
playing of the tracks is automatic.  
The tracks cannot be recorded onto the music server.  
ACCEPTANCE OF THE FILES  
You can play CDs with up to 8 levels, 255 folders and  
400 ꢀles maximum.  
Some blank CDs may not be played by your equipment (quality,  
recording speed...).  
When you burn a CD-R or CD-RW, select the ISO 9660 level 1.2 or  
WHAT IS THE MP3/WMA FILE FORMAT?  
Joliet burning standard.  
To obtain the best acoustic quality possible, select the lowest  
burning speed.  
The MPEG1 and MPEG2 standards are accepted.  
MP3 is the abbreviation of MPEG-1 Audio Layer 3 and  
MPG is the abbreviation of Motion Pictures Experts  
Group, a digital video data compression standard used on media  
such as video CDs.  
Transmission speeds between 32 and 320 kbits/s and scans  
between 16 kHz and 48 kHz are accepted.  
The MP3 compression reduces the number of bytes in a song by  
eliminating the long sound waves in the range of frequencies which  
are imperceptible to the human ear, so producing high quality audio  
ꢀles with a low volume of data.  
To display the title information (the name of the artist, the title of the  
album, etc...), the information contained in the ID3 Tags or the WMA  
Tags must be included in the MP3/WMA ꢀles burned onto the disc.  
This compression divides the size of the content of a conventional  
audio CD by approximately 10, which means that the content of  
10 audio CDs can be recorded onto a single CD-R or CD-RW.  
COPYRIGHT  
WMA is the abbreviation of Windows Media Audio, another audio  
data compression standard offered by Microsoft.  
It can be used to create and save audio ꢀles at a compression rate  
higher than that of the MP3 format.  
Your audio system may allow you to listen to music which is usually  
protected by copyright in accordance with current national and  
international standards. Please consult these standards and comply  
with them.  
252  
04 AUDIO / VIDEO  
INFORMATION DISPLAYED IN MP3/WMA CD MODE  
A
B
C
D
H. Displays the item currently selected.  
I. To scroll up or down through the tracks.  
E
F
N
Press and hold for fast backwards or  
forwards playing of a track.  
G
J. To scroll up or down through the folders.  
M
K. Displays the folder number and the folder  
name. Plus the lists and numbers of  
tracks and the name of the ꢀle (without  
extension).  
H
L. To display the secondary menu.  
L
K
J
I
M. Move the cursor onto the track currently  
being played.  
N. Displays the type of medium, MP3 or  
WMA.  
A. The number and the name of the track  
currently being played are displayed.  
B. The name of the album/folder is displayed  
for the track currently being played.  
C. The name of the artist is displayed for the  
track currently being played.  
The CD button is only active if the player  
contains a CD.  
D. The playing time of the current track is  
displayed.  
E. The playing mode currently selected is  
displayed.  
F. Position of the cursor and total number of  
folders or tracks on the current level.  
G. To display the list of folders of a higher  
level.  
Press Open to return the screen to the vertical  
position.  
253  
04 AUDIO / VIDEO  
PLAYING AN MP3/WMA CD (1/2)  
Press  
Explanation  
Result  
Press the MODE button then CD, if the player already contains a CD.  
Otherwise, insert a CD in the player, play begins automatically.  
Moving around the folders  
You can move by one level at a time.  
Press on the name of a folder and at each press the list of folders of the level below is  
displayed.  
These displays indicate the current level:  
CD: level 0, folder below: level, folder below that, level 2, etc ...  
Up to 8 levels.  
Press on the folder above to move up and/or select a level.  
Selecting a folder  
Press [ꢀ Folder] to select the previous folder.  
Press [Folder ꢁ] to select the next folder.  
254  
04 AUDIO / VIDEO  
PLAYING AN MP3/WMA CD (2/2)  
Press  
Explanation  
Result  
Selecting a track  
Press [ꢂꢄTrack] to select the previous track or return to the beginning of the track  
currently being played.  
Press and hold for fast backwards play.  
Press [Track ꢃ] to select the next track.  
Press and hold for fast forwards play.  
Changing the playing mode  
Press [^] to access the secondary menu.  
Press [Repeat] to play the track selected in a loop (repetition).  
Press [Repeat] again to play all of the tracks in the selected folder in a loop.  
Press again to stop.  
Press [Scan] to play the beginning of each track in each folder for approximately  
10 seconds (scanning).  
Press [Scan] again the play the beginning of each track in the selected folder in a loop.  
Press again to stop or press on the current track (during the 10 seconds) and play  
begins.  
Press [Random] to play all of the tracks in the selected folder in random order.  
Press [Random] again to play all of the tracks on the CD in random order.  
Press again to stop.  
255  
04 AUDIO / VIDEO  
INFORMATION DISPLAYED IN DVD MODE  
A
B
C
D
E
J. To play the previously selected zone on  
the disc.  
K. To display the DVD title menu.  
L. To scroll up or down through the chapters.  
F
G
H
I
R
Q
P
Press and hold for fast backwards or  
forwards play.  
O
N
M. To scroll up or down through the titles.  
N. To enter a title or chapter number.  
O. To change the angle.  
J
P. To change the language of the subtitles.  
Q. To change the language.  
M
L
K
R. To select a chapter or title or specify a  
A. This icon is displayed when the operation  
requested cannot be carried out.  
number.  
B. The number of the chapter currently being  
played is displayed.  
C. The number of the title currently being  
played is displayed.  
D. Symbols display the current status of the  
The DVD button is only active if the player  
contains a DVD.  
player.  
E. The playing time is displayed.  
F. To resume normal play when play is  
paused or during slow-motion play.  
G. To stop play temporarily.  
H. To stop play. Press the screen to access  
For safety reasons, the video is not  
displayed while driving, however the audio  
can be played.  
the menu.  
I. For slow-motion play.  
To display the picture and watch a DVD,  
park the vehicle in a safe place.  
Press Open to return the screen to the vertical  
position.  
256  
04 AUDIO / VIDEO  
PLAYING A DVD  
Press  
Explanation  
Result  
Press the MODE button then DVD, if the player already contains a DVD.  
Otherwise, insert a DVD in the player, the picture is displayed  
automatically. Press the screen to access the menus.  
While driving, only the soundtrack is played and no picture is displayed.  
Selecting a chapter  
Press [ꢂ Chapter] to select the previous chapter or return to the beginning of the  
chapter currently being played.  
Press and hold for fast backwards play.  
Press [Chapter ꢃ] to select the next chapter.  
Press and hold for fast forwards play.  
Selecting a title  
Press [ꢄꢀ Title] to select the previous title.  
Press [Title ꢁ] to select the next title.  
257  
05 SETTINGS  
DISPLAY SCREEN, SOUND, PICTURE  
A
B
- Choose to switch off the screen.  
To switch it back on, touch the screen or  
press any button.  
- Choose the settings of the sound in the  
vehicle, if an audio source is selected  
(FM, CD, ...), for:  
B1 - the sound distribution or the volume  
such as the front-rear balance, the bass,  
the medium, the treble, the volume  
adjustment in relation to the vehicle  
speed,  
B2 - the type of music (with surround option)  
such as classic, jazz, pop, rock, hip hop,  
country, normal, ...  
A
B
C
B1  
B2  
B3  
B3 - the sound ꢀeld (with surround option)  
such as stage, live, hall, normal, ...  
C
- Choose the quality of the picture for:  
C1 - the colour (when playing DVDs),  
C1  
C2  
C3  
C4  
C5  
C2 - the intensity of the colours (when playing  
DVDs),  
C3 - the brightness,  
C4 - the contrast,  
C5 - the level of black.  
258  
05 SETTINGS  
TIME AND DATE, LANGUAGE, UNIT, PICTURE SIZE  
D
- Choose the base settings of the system for:  
D1 - setting of the time by the RDS signal, time  
D1  
D3  
D2  
D4  
zone, summer time,  
D2 - the language (English, Français, Deutsch,  
Nederlands, Portuguese, Español, Svenska,  
Italiano, Dansk),  
D3 - the units for calculation of the distances (km  
or miles and °C or °F),  
D4 - other settings such as:  
- the voice guidance volume,  
- the type of voice guidance voice (female  
or male),  
- the volume of the operation bleeps (1 to 3  
and 0=no bleep),  
- the type of keypad (alphabet or PC),  
- the range of menu colours (red or blue),  
- the display or not of the audio play icons  
in the map screen,  
D
E
- the reinitialisation of the vehicle sensor,  
- the interruption or not of the display when  
the air conditioning is used.  
E
- Choose the size of the DVD picture for:  
E1 - normal 4/3,  
E2 - extends the picture evenly to the right and  
to the left in wide screen mode,  
E3 - extends the right and left parts only leaving  
the centre as it stands in wide screen mode,  
E4 - enlarges the picture in 4/3 format. The top  
and the bottom are outside the frame.  
E1  
E2  
E3  
E4  
259  
05 SETTINGS  
EQUIPMENT, CONTRAST, TRAFFIC INFORMATION (TP)  
F
- Choose to adjust or set the parameters of  
certain equipment offered in your vehicle  
(e.g.: unfolding/folding of the mirrors,  
closing the windows on locking, timing  
and sensitivity of the automatic lighting,  
direction indicators motorway function, ...):  
F1  
F2  
F1 - to scroll up the list,  
F2 - to scroll down the list,  
F3  
F3 - to reinitialise all of the settings  
(manufacturer's settings).  
Press each setting to select or change the  
parameters.  
F
G
H
G
H
- Choose to adjust the contrast of the  
display in relation to the ambient light level  
(day, night or automatic).  
- Choose to activate or deactivate the  
trafꢀc information (TP).  
260  
06 INFORMATION  
SYSTEM VERSION, SATELLITE  
A - View the system information:  
A1 - the software version,  
A2 - the map data version,  
A1  
A2  
A3  
A3 - the system information database version.  
To update the versions, insert the DVD  
containing the new data and follow the  
instructions on the screen.  
B
- View the GPS information:  
B1 - the satellite positions diagram with the  
direction of movement of the vehicle. Plus  
the position of the satellite signal receivers,  
B2  
B1  
A
B
B2 - the name of the current location,  
B4  
B5  
B3  
B3 - the longitude and latitude of the current  
B6  
B7  
location,  
B8  
B4 - the position measurement status (2D=3  
satellites or fewer, 3D=4 satellites or more),  
B5 - the number of receiving satellites,  
B6 - to have north at the top of the map,  
B7 - to have the direction of the vehicle at the  
top of the map,  
B8 - to pivot the map from overhead or change  
the angle of the map.  
261  
06 INFORMATION  
CALENDAR, TRIP  
C
D
- Make a note on the calendar of special  
days, birthdays, ...  
Use the arrows to ꢀnd a date and press  
directly on the day required to enter the  
event.  
- View the driving information:  
D1 - the average speed,  
D2 - the average fuel consumption,  
D3 - the current fuel consumption,  
D1  
D2  
D3  
D4 - for speed and fuel consumption graphs in  
5 minute intervals,  
C
D5 - choose an automatic reset (key at off for  
more than 4 hours) or manual reset (press  
[Reset]),  
D4  
D5  
D
D6 - the distance which can still be travelled  
(based on the fuel remaining and the  
recent average consumption),  
D7 - the distance travelled since the fuel  
tank was last ꢀlled (press [Refuel] to  
reinitialise),  
D6  
D7  
D8  
D8 - the driving time (duration between the key  
being turned to on then to off),  
D7  
- press [Start] to measure intermediate  
times with:  
D9 - the duration,  
D10 - the distance,  
D11 - the speed,  
These double arrows permit  
access to the driving information  
screen, previous or next.  
D9  
D10  
D11  
D12  
D12 - the fuel consumption.  
262  
06 INFORMATION  
ENVIRONMENT, AIR CONDITIONING, TELEPHONE  
E
- View the environment information:  
E1 - the altitude,  
E2 - the atmospheric pressure,  
E1  
E2  
E3 - the ambient temperature. The ice  
symbol ꢁashes if there is a risk of ice.  
E3  
F
- View the air conditioning settings:  
F1 - the fan speed indicator,  
F2 - the air selection indicator,  
F3 - the windscreen demisting indicator,  
F4 - the air conditioning indicator,  
F5 - the rear screen demisting indicator,  
F6 - the AUTO mode indicator.  
F3  
F4  
F5  
F6  
E
F
F1  
F2  
G
G
- Make and receive telephone calls:  
G1 - enter the telephone number,  
G2 - delete a character,  
G3 - make the call.  
G1  
G2  
Refer to the hands-free telephone  
section to connect your Bluetooth®  
mobile telephone.  
G3  
263  
07 PEUGEOT CONNECT USB  
USING THE USB PORT  
Models supported:  
The USB port is used to connect a portable device (MP3 player,  
iPod touch® : FW version 1.1.1 or later.  
Apple® player, ...). The ꢀles are sent from the player to your audio  
system and heard through the vehicle's speakers.  
-
-
-
-
-
-
iPod classic® : FW version 1.0 or later.  
iPod 5th generation® : FW version 1.2.2 or later.  
iPod nano 5th generation® : FW version 1.2 or later.  
iPod nano 2nd generation® : FW version 1.1.2 or later.  
1
Compatible USB mass storage device: 256 Mb capacity or  
greater.  
File formats: MP3, WMA, AAC, WAV.  
Maximum number of levels (including root): 8.  
Number of folders: 700.  
With the vehicle stationary, ignition  
switch in the LOCK position, connect a  
suitable cable to the portable player.  
Number of ꢀles: 65 535.  
2
Do not connect the portable device directly to the USB port, use a  
cable.  
To disconnect the cable, the ignition switch must be in the LOCK  
position.  
Then connect the cable to the vehicle's  
USB port.  
Navigation in the ꢀle base is done via the portable device / iPod®.  
Take care not to trap the cable when closing the armrest.  
264  
07 PEUGEOT CONNECT USB  
INFORMATION DISPLAYED IN USB OR AUX MODE  
A
B
C
I. To display the secondary menu.  
J. Move the cursor to the track being played.  
L
D
E
K
K. Display the format of the current ꢀle: MP3,  
WMA, AAC, WAV.  
L. Displays the type of medium: USB or iPod.  
J
F
I
H
G
A. The number and the name of the track  
currently being played are displayed.  
B. The name of the album/folder is displayed  
for the track currently being played.  
C. The name of the artist is displayed for the  
track currently being played.  
D. The playing time of the current track is  
displayed.  
E. To display the list of folders of higher  
levels.  
F. To display in list mode.  
G. To scroll up or down through the tracks.  
or  
Press and hold for fast backwards or  
forwards playing of a track.  
H. To scroll up or down through the folders.  
265  
07 PEUGEOT CONNECT USB  
INFORMATION DISPLAYED IN IPOD (OR APPLE® PLAYER) MODE  
A
B
C
F. The item currently selected and being  
played is highlighted.  
G. To scroll up or down through the tracks.  
J
I
D
E
Press and hold for fast backwards or  
forwards playing of a track.  
H. To display the secondary menu.  
I. Move the cursor onto the track currently  
F
being played.  
J. Displays the type of medium: USB or iPod.  
H
G
A. The number and the name of the track  
currently being played are displayed.  
B. The name of the album/folder is displayed  
for the track currently being played.  
C. The name of the artist is displayed for the  
track currently being played.  
D. The playing time of the current track is  
displayed.  
E. To display/sort each category:  
Go to the root  
Artists  
Albums  
Songs  
Genres  
Playlists  
266  
07 PEUGEOT CONNECT USB  
PLAYING A TRACK (1/2)  
Press  
Explanation  
Result  
Press the MODE button then on USB/iPod.  
In USB or AUX mode: you can press the next folder up at any time, to go up one level/  
or select a level.  
In iPod mode: you can display / sort by category at any time.  
Press on a track to play it.  
Selecting a previous / next track  
Press [ꢂ Track] to select the previous track or return to the beginning of the track  
currently being played.  
Press and hold for fast backwards.  
Press [Track ꢄꢃ] to select the next track.  
Press and hold for fast forwards.  
267  
07 PEUGEOT CONNECT USB  
PLAYING A TRACK (2/2)  
Press  
Explanation  
Selecting a folder (in USB or AUX mode)  
Result  
Press [ꢀ Folder] to select the previous folder.  
Press [Folder ꢁ] to select the next folder.  
Changing the playing mode (in USB, AUX or iPod mode)  
Press [^] to access the secondary menu.  
Press [Repeat] to play the track selected in a loop (repetition).  
Press [Repeat] again to play all of the tracks in the selected folder in a loop.  
Press again to stop.  
Press [Random] to play all of the tracks in the selected folder in random order.  
Press [Random] again to play all of the tracks on the player in random order.  
Press again to stop.  
Press [Scan] to play the beginning of each track in each folder for approximately  
10 seconds (scanning).  
Press [Scan] again the play the beginning of each track in the selected folder in a loop.  
Press again to stop or press on the current track (during the 10 seconds) and play  
begins.  
Press on [Database] to display the Gracenote® version (Compact Disc Database:  
database of music CDs).  
268  
08 BLUETOOTH® STREAMING - TELEPHONE  
MATCHING A TELEPHONE, PLAY A TRACK  
Press on  
Explanation  
Results  
Press the MODE button then Bluetooth Audio.  
Press on [Matching] to start matching.  
Press on [New device] to detect a telephone.  
Enter the PIN in the audio system.  
Refer to the instructions for your telephone to authorise the matching.  
Enter the PIN in the telephone then after a short time it appears in the list.  
Select the telephone in the list, then choose [Hands free] for telephone and/or [Audio  
Bluetooth] for streaming (an iPhone is recognised automatically).  
Then conꢀrm with [Yes].  
Once the telephone is matched, select a track then press [ꢁ] to play it.  
269  
08 BLUETOOTH® STREAMING - TELEPHONE  
INFORMATION DISPLAYED IN TELEPHONE MODE  
A
B
F
E
D
F1  
F2  
F3  
F4  
F5  
C
A. Enter the number using the keypad.  
B. Erasing a number one at a time.  
C. Return to the previous screen.  
F. To display the secondary menu:  
F1. Is displayed if the personal identiꢀcation  
D. To display the list of contacts (in the  
number has not been deꢀned.  
Bluetooth telephone or the vehicle).  
Press to enter it.  
Select a contact in the list.  
F2. Is displayed if the personal identiꢀcation  
E. To start [Dial] or start again [Redial] a  
number has been deꢀned.  
telephone call  
F3. To display the list of matched telephones.  
F4. To display the list of voice commands.  
F5. To reset all settings.  
Refer to the section "matching a  
telephone" to connect your telephone  
by Bluetooth®.  
270  
09 BLUETOOTH® TELEPHONE  
Audio system on/off.  
Increase the audio volume.  
Decrease the audio volume.  
ANSWER A CALL  
Press this button to accept an incoming call.  
In the event of a 2nd incoming call, press  
to put the 1st call on hold and speak to the  
second caller.  
In this case, press brieꢁy to switch from one  
call to the other.  
To establish a three-way conversation,  
press on SPEAK to change from voice  
recognition and say "Incorporate the call".  
SPEAK  
END CALL  
Press this button to reject an incoming call.  
Press this button to activate voice recognition ("Listening" is displayed).  
During a voice recognition, press this button brieꢁy to put this voice recognition on hold.  
Make a long press on this button to deactivate voice recognition.  
During a conversation, press this button to  
end the call.  
Press this button brieꢁy to activate voice recognition, even during a call.  
271  
09 BLUETOOTH® TELEPHONE  
CHANGING THE VOICE COMMAND LANGUAGE  
2
What is the bluetooth® hands-free telephone with voice  
recognition?  
Say "Setup".  
The system uses wireless communication technology known as  
Bluetooth® which allows you to make hands-free telephone calls in  
3
your vehicle via your Bluetooth® compatible mobile telephone.  
Say "Language".  
You can make telephone calls using a microphone located in the  
courtesy lamp, making use of the simple steering mounted controls  
or by the voice recognition function with voice commands. Five  
languages are available: English (the default), Spanish, French,  
German and Italian.  
4
5
The system says "Select a language: English, Spanish, French,  
German or Italian".  
By default, the voice recognition system is in English.  
Say the language of your choice in English, example: say  
"French" for French.  
6
7
8
If you do not start the training procedure within around 3 minutes of  
pressing SPEAK, the process is cancelled.  
The system then says "French selected. Is this correct?"  
If you press SPEAK within 5 seconds following the play of a voice  
command, this command is saved again.  
Say "Yes" to start the change of language process  
Say "No" to return to steps 4 to 7.  
1
Press this button.  
The system repeats the language chosen and completes the  
change of language process.  
272  
09 BLUETOOTH® TELEPHONE  
TRAINING THE USER'S VOICE  
4
When you are ready to start, press and  
hold this button.  
You can use the user voice training function to create a voice model  
for one person per language.  
The characteristics of your voice and your pronunciation are saved  
in this model to provide the best voice recognition.  
The vehicle must be stationary with the parking brake applied.  
5
Switch off your telephone during the operation to avoid any  
The system says the ꢀrst of 45 standard phrases.  
interruption.  
Repeat each of the phrases in the table on the following  
page.  
6
7
The system saves your voice and moves on to the next  
1
command.  
Continue the process until all of the phrases have been  
saved.  
Press this button.  
After playing all the voice commands, the system says "The word  
enrolment is complete" and ends the process.  
2
3
Say "Word training".  
If you do not start the programming process within approximately  
3 minutes after pressing the SPEAK button, the process is  
cancelled.  
If you press the SPEAK button within 5 seconds of the play of a  
voice command, this command is saved again.  
An explanation message is given.  
273  
09 BLUETOOTH® TELEPHONE  
VOICE TRAINING COMMANDS  
1
2
# 790 (for # = "Hash")  
* 671 (for * = "Star")  
212 - 4 903  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
55 66 77 88 99  
44 33 22 11 00  
Call 293 - 5804  
Call * 350  
31  
32  
33  
34  
35  
36  
37  
38  
39  
40  
41  
42  
43  
44  
45  
Home, Work, Mobile, Pager  
List of names  
3
No  
4
235 - 3 494  
Phone book: Delete  
Phone book: New entry  
Previous  
5
315- 5 657  
Call 1 (234) 567 - 8 901  
Dial 639 - 1542  
Dial # 780  
6
456 - 7 930  
7
793 - 5 462  
Phone book: Clear all  
Redial  
8
794 - 1 826  
Dial (987) 654 - 3210  
1058# 3794# Send  
27643# 4321# Send  
Cancel  
9
826 - 3 145  
Repeat the training  
Conꢀgure the conꢀrmation requests  
Conꢀgure the language  
Conꢀgure the matching options  
Match a telephone  
Transfer the call  
10  
11  
12  
13  
14  
15  
962 - 7 305  
(531) 742 - 9 860  
(632) 807 - 4 591  
(800) 222 - 5 015  
(888) 555 - 1 212  
0 123 456 789  
Continue  
Emergency number  
Clear all  
Help  
Yes  
274  
09 BLUETOOTH® TELEPHONE  
MATCHING A BLUETOOTH®  
5
TELEPHONE  
Say "Match a telephone".  
FIRST CONNECTION  
For reasons of safety and because the sustained attention of the  
driver is needed, operations of matching a Bluetooth® mobile phone  
with the audio system's hands-free function must be done with the  
vehicle stationary.  
6
7
8
The systems says "Please say the 4 digits of a matching code".  
The system can register up to 7 Bluetooth® compatible mobile  
telephones.  
Say a 4-digit number which will be recorded as the  
matching code.  
The telephone which has the highest level of priority is connected  
automatically.  
The system conꢀrms the validity of the number spoken,  
1
answer "Yes".  
Say "No" to return to step 7.  
Press this button.  
Remember this matching code as you must enter it in the telephone  
in one of the following steps of the matching procedure.  
2
Say "Conꢀgure".  
3
4
Say "Matching options".  
The system says "Do you wish to match a telephone, delete a  
telephone or obtain the list of matched telephones?".  
275  
09 BLUETOOTH® TELEPHONE  
The services available depend on the network, the SIM card and the compatibility of the Bluetooth® telephone used. Check in your telephone user  
manual and with your service provider for the services you have access to.  
9
13  
The system says "Allocate an order of priority between 1 and 7.  
The system says "Start the matching procedure on the  
One is the highest level of priority".  
telephone. Consult the instructions in the telephone manual".  
14  
Give a number between 1 and 7 to establish the level of  
10  
priority of the mobile telephone.  
Consult your mobile telephone's user manual and enter  
the matching code recorded in step 7 in the telephone.  
15  
16  
17  
The system says and conꢀrms the "name of the telephone" and  
the "number" of its priority.  
Answer "Yes".  
Say "No" to return to step 13.  
If the code is incorrect, the system locks. To clear the code:  
-
-
check that the telephone's voice recognition is not activated,  
with the ignition on and the audio system active, press the END  
The systems says "Matching complete" then emits an audible  
CALL button for 2 seconds, 3 times in succession.  
signal and deactivates the voice recognition.  
When it detects a Bluetooth® compatible mobile telephone, the  
system says "Please say the name of the telephone after the  
beep".  
11  
12  
If the system does not detect the Bluetooth® compatible mobile  
telephone, the matching process stops ands is accompanied by an  
audible signal.  
If you select a level of priority which has already been allocated to  
another telephone, the system asks you if you wish to replace this  
level of priority.  
After the audible signal, allocate a name to the telephone  
by saying the name of your choice.  
276  
09 BLUETOOTH® TELEPHONE  
USING A TELEPHONE NUMBER  
You must have ꢀrst matched a Bluetooth® compatible mobile  
telephone with the system.  
1
2
Press this button.  
Say "Dial".  
3
4
The system says "Number please".  
Call out the telephone number.  
5
The system asks you to conꢀrm this number, answer  
"Yes".  
Say "No" to return to the previous step.  
277  
09 BLUETOOTH® TELEPHONE  
SAVING A NAME IN THE SYSTEM PHONE BOOK  
The system has its own phone book, independent of that of the  
6
mobile telephone.  
Give the name of your choice.  
It can contain up to 32 names for each language.  
Each name in the phone book is associated with 4 locations:  
7
HOME, WORK, MOBILE and PAGER.  
The system says "HOME, WORK, MOBILE OR PAGER".  
1
8
Give the location which corresponds to the number that  
you wish to record.  
Press this button.  
9
The system asks you to conꢀrm the location.  
2
3
4
Say "Phone book".  
Answer "Yes".  
10  
11  
12  
13  
14  
Say "No" to return to step 7.  
The system says "Select one of the following items: New Entry,  
Change, List of names, Delete or Clear all, or say Cancel to  
return to the main menu".  
If a telephone number has already been recorded for this location,  
the system says "The current number is -number-, number  
please".  
If you do not wish to change the telephone number, repeat  
the original number to retain it, otherwise say the new  
number.  
Say "New entry".  
The system asks you to conꢀrm the number.  
5
The system says "Name please".  
Answer "Yes".  
Say "No" to return to step 11.  
278  
09 BLUETOOTH® TELEPHONE  
USING A NAME IN THE PHONE BOOK  
6
You must have ꢀrst matched a compatible Bluetooth® mobile  
Give the location corresponding to the number that you  
wish to call.  
telephone with the system.  
1
7
The system request conꢀrmation of the name.  
Press this button.  
8
9
Answer "Yes".  
Say "No" to return to step 4.  
2
3
4
5
Say "Call".  
The system says "Call to <name> at <location>" and makes the  
call.  
The system says "Name please".  
Give the name of the person that you wish to call.  
If several telephone numbers have been recorded for this person,  
the system says "Do you wish to call <name> {home}, {work},  
{mobile} or {pager}?"  
279  
09 BLUETOOTH® TELEPHONE  
REDIAL THE LAST NUMBER CALLED  
RECEIVING A CALL  
1
2
The telephone ring is sent to the speaker by the front passenger's  
seat.  
Press this button.  
If an audio source (CD, radio, ...) is in operation when the call is  
received, it is placed on MUTE and only the incoming call is heard.  
When the ignition switch is in the ACC or ON position, the audio  
system is activated automatically if an incoming call is received,  
even if it was originally off.  
Say "Redial".  
1
Press this button.  
At the end of the call, the audio system returns to its previous state.  
280  
09 BLUETOOTH® TELEPHONE  
VOICE COMMANDS (1/2)  
Press this button to start the voice recognition.  
Conꢀgure  
Divert the call  
Add a location  
Conꢀgure the conꢀrmation requests  
Language  
Home, at home  
Work, at work  
Mobile, on mobile  
Pager, on pager  
Help  
Phone book  
Dial  
Call  
Redial  
New entry  
Emergency number  
Matching options  
Match a telephone  
Delete a telephone  
List of matched telephones  
Select a telephone  
Previous  
Delete  
Continue  
All  
Change  
Call this number  
Change another entry  
Try again  
Cancel  
Mute  
Deactivate mute  
Yes  
Clear all  
List of names  
No  
When the system is waiting for a voice command, say "Help" to obtain a list of commands which can be used in the current situation.  
281  
09 BLUETOOTH® TELEPHONE  
VOICE COMMANDS (2/2)  
Press this button to start the voice recognition.  
Zero  
One  
Two  
English  
Word training  
PIN  
Phone book New entry  
Phone book Change  
Repeat training  
Activate  
Three  
Four  
Phone book Delete  
Phone book Clear All  
Deactivate  
Five  
Phone book List of names  
Conꢀgure the conꢀrmation requests  
Conꢀgure Select a telephone  
Conꢀgure the matching options  
Delete a name  
Incorporate the call  
<digits> Send  
Six  
Seven  
Eight  
Nine  
Star (*)  
Hash (#)  
Conꢀgure the language  
Conꢀgure the PIN  
When the system is waiting for a voice command, say "Help" to obtain a list of commands which can be used in the current situation.  
282  

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot