Driving
Starting - stopping the vehicle
Ignition switch
Starting
Stopping
F
Check that the drive selector is in
position P.
Insert the key in the ignition switch.
Turn the key to position 4 (START).
F
F
F
F
F
F
Stop the vehicle.
Keep your foot on the brake pedal.
Place the drive selector in position P.
Apply the parking brake.
Turn the key to position 1 (LOCK).
Remove the key from the ignition switch.
F
F
F
Hold it in this position for a few
seconds until the "READY" lamp
comes on accompanied by an
audible signal.
Do not attach any heavy objects to the
key as this could weigh down on it when
in the ignition switch and cause a fault.
F
Release the key.
The key returns automatically to
position 3 (ON).
-
-
Position 1: LOCK
The steering is locked.
Position 2 : ACC
The ancillaries (radio, 12 V socket, etc.)
can be used.
-
-
Position 3: ON
Ignition on.
Position 4: START
"Ready" lamp on.
Motor ready to drive the vehicle.
If you use the ancillaries for a prolonged
period (with the key in the ACC
position), you risk discharging the 12 V
battery. Starting your vehicle will then
no longer be possible. Be aware.
88
English