Instruments, controls and displays - 25
Adjusting the parameters
display A
Press and hold button A for two sec-
onds to access the settings; the data
lashes, indicating it is ready to be
modiied.
Then, each press of button A scrolls
through the various data in the fol-
lowing order:
- language of information displayed,
- hours (12 then 24 hour mode),
Setting the parameters screen B
MONOCHROME DISPLAY B
Press button C for two seconds to
access the settings. The informa-
tion lashes to show it is ready to be
modiied.
Then, individual presses on button C
allow you to scroll through the vari-
ous data in the following sequence:
- language in which the information
is displayed,
- unit of distance (kms or miles),
- unit of temperature (degrees Cel-
sius or Fahrenheit),
- minutes,
- year,
- time format (12 then 24 hour mode),
- hour,
- minutes,
- year,
- month,
- month,
- day.
This enables the following informa-
tion to be displayed:
- the time,
Pressing button B alters the value of
the parameter selected. Press and
hold for rapid advance (return to start
after the last possible value).
After 7 seconds with no action, the
standard display returns; the modi-
ied data is now recorded.
- day.
- the date,
PressingbuttonDallowsyoutochange
the information selected. Maintain the
pressure for rapid scrolling.
After 7 seconds without operation,
the screen returns to the normal
display and the modiied data is re-
corded.
- the outside temperature (this lash-
es accompanied by the message
"Ice alert"),
- the radio displays,
- the status of the doors. The display
shows you, by means of a graphic,
whether a door is open,
- the warning messages (e.g. ''bat-
tery charge fault'') or information
messages (e.g. "fuel level low''),
displayed temporarily, can be
cleared by pressing button C or D,
- the trip computer.
01-02-2005
English 
