66 - Visibility
STEERING WHEEL STALKS
AUTOMATIC switching on of
lights/Windscreen wipers
Operating check
Activation
The activated function is accompa-
nied by an audible signal and a mes-
sage on the multifunction display.
Disarming
The disarmed function is accompa-
nied by an audible signal.
Automatic switching on of
lights
The side lights and dipped beam
headlamps switch on automati-
cally if the light is poor and when the
windscreen wipers operate continu-
ously and switch off when the light
becomes bright enough or the wind-
screen wipers are switched off.
If the brightness sensor does not
function correctly, the lights come
on accompanied by an audible signal
and a message on the multifunction
display.
In foggy weather, if the light
is not dim enough to result
in the automatic switching
on of the lights, it is your
responsibility to switch the dipped
headlamps on manually, as well as
the fog lamps.
When the driver uses the manual
lighting controls, the function is
disarmed temporarily.
Do not cover the brightness sensor,
coupled with the rain sensor, located
in the centre of the windscreen,
behind the interior mirror. It is used
for automatic switching on of the
lights.
Contact a PEUGEOT dealer.
In foggy weather or in snow, the
brightness sensor can detect
suficient light, the lights will not
come on automatically.
This function is active when the vehi-
cle is supplied to the customer.
To disarm or activate the function:
- Place the key in the accessories
position (1st notch),
- Place the lights stalk in the AUTO/0
position,
- Press the end of the lights stalk for
more than four seconds.
01-02-2005
English 
