In the event of a breakdown
Should the pressure of one or more tyres
be adjusted, it is necessary to reinitialise
the under-inflation detection system.
For more information on Tyre under-inflation
detection, refer to the corresponding section.
► Slacken the bolt using the wheelbrace until
the carrier is low enough to allow the carrier
hook to be disengaged.
Spare wheel
► If the vehicle is fitted with a towbar, raise
the rear of the vehicle using the jack (must be
at jacking point B) to allow sufficient space to
remove the spare wheel.
Scan the QR Code on page 3 to view
explanatory videos.
For more information on the Tool kit,
Removing the spare wheel from the
carrier
► Depending on version, open the tailgate or
side-hinged doors.
refer to the corresponding section.
► Park the vehicle without obstructing traffic
and apply the parking brake.
► Follow the safety instructions (hazard
warning lamps, warning triangle, wearing high
visibility jacket, etc.) according to the legislation
in force in the country in which you are driving.
► Switch the ignition off.
► Release the carrier from the hook and
place the spare wheel next to the wheel to be
changed.
Accessing the spare wheel
► Access to the spare wheel is from the rear.
► Access the carrier bolt, located on the rear
door sill.
204
English 
